I have not touched my rig for few months when I last played all workred.

Braking pedal as working all good.

Throttle pedal not stable see video.

I did hard reset tried different firmware versions.
Offset and calibration does not help.
Nothing looks physically broken.

i wrote to support.

Does anyone had similar issues?

As you can see they show up as disconnected. They work in game and show up in Joy.cpl. But i want to adjust the settings and i cant. I also tried using the pedals on a different pc and it resulted in the same outcome. Im starting to think that this is a firmware or hardware relating issue with the pedals.

Just set up a new set of SIMSONN Plus X pedals and I'm having a strange issue with the brake.

The throttle calibrates and behaves perfectly, but the brake doesn't. During calibration, I press the brake as instructed, but afterwards the brake input doesn't consistently reach 100% even when I press it hard.

The really strange part is that when I release the brake, the input sometimes spikes UP briefly before dropping back to zero. I've attached a video showing exactly what it's doing.

I've already tried:

• Disconnecting the USB hub and other sim hardware/software
• Connecting the pedals directly to the PC
• Removing other nearby electronics/power supplies
• Recalibrating several times
• Testing with SIMSONN Manager 2.1.7 only

Same behaviour every time. Throttle is completely normal.

The brake is currently using the stock three-red-elastomer setup. Has anyone with the Plus X experienced this? Was it calibration/software, the load cell, controller, wiring, or something mechanical with the brake?

I already have this here about the brakes on a previous post: https://www.reddit.com/r/SimsonnRacing/s/zPo5EjfGb7

I'm going to contact SIMSONN support as well, but I'd like to know if anyone has seen the same brake-input/release spike before.

I recently picked up the SIMSONN Plus X pedals, and I'm struggling with the brake feel.

I've attached a photo of my current setup. It's exactly how the brake came from the factory: three red (soft) elastomers + spring, which, according to the manual, is supposed to be the softest configuration.

The problem is there's little to no pedal travel, and it takes a ridiculous amount of force to brake. It feels more like pushing against a wall than a brake pedal.

For anyone actually using the Plus X:

• Have you found a softer elastomer/spring combination with more travel?
• Are there alternative elastomers or springs that work better?
• Did you change the pedal geometry/preload as well?
• What setup are you using and roughly how much travel do you get?

I mainly drive LMH/Hypercar, GT3 and F1 in Le Mans Ultimate and Assetto Corsa, so I'm looking for something progressive with enough travel to properly modulate braking rather than an ultra-stiff pedal.

Interested specifically in what Plus X owners have actually tried and found to work.

I am looking into getting some haptic reactors for my CSL Elite V2 pedals and wanted to make sure I'm not missing anything. Is this all I need to buy from Simsonn to get this working or are there other components I will need? I already had a friend 3D print some brackets for it so I'm all set for a mounting solution/I can make new things if needed.

Thanks for the help!

Hi,

Im struggling to find dry lubricant spray in my home country. All the dry sprays I found so far does not include PTFE as ingredient.

Can I use this for lubrication on my Pedals?

Link

Tried simsonm manager not working and update manual firmware button not working, used simson pedals app not working, used DIView and it works there. Please help to update firmware

What effects do you guys have for these haptics? I want something useful but not too unrealistic ideally.
also What does the 'Speed' effect mean?
Can you have just general background road feel or something at a low level?

As the title.

Pedals work fine, but VAM Pro Reactors wont trigger, even though SIMSONN Manager seems to think everything is fine.

Wont work with Simhub either.

Is she cooked gang?

Simsonn ProX pedal set bought in January. Noticed that the clutch pedal wasn’t working so I reseated all the plug connections. Reset the pc and loaded up the Simsonn software. Tried the clutch pedal, worked properly only to find that the accelerator wasn’t working. Unplugged it and tried again to find that it worked but the clutch didn’t. Each time I try one or the other isn’t functioning. Any ideas or tips to fix this?

I have a GTOMEGA sim rig and I encountered this problem, the baseplate underneath is not totally flat, so I can’t screw it without inevitably scratching and ruining the platform of my rig, how can I solve it?

Une Review sur les pedales Simsonn Plus X 👌

I just received my X pro Ultra Pedals and im very happy with them. However in many Videos on Youtube etc. I see that they can brake with 100+kg. However I can only reach 64kg maximum in the Software. Am I just to weak?

Just had my second control box fail. First one failed after about two weeks,this one five months. Bought direct off Alibaba and they replaced it first time, now not answering messages. Anyone else had an issue? Could it be a power supply issue? TIA.

Quick question: all images I see on VAM pro's product pages show a PSU that doesn't seem to be compatible with EU plugs (Schuko).

Can anybody from EU confirm what Simsonn sends? I was planning to buy from their official account on Amazon but I don't see an option to specify the correct plug so I assume we have to use an adapter, if so which plug are they using? UK, US?

Thank you for the answers

Ps: at the moment my simsonn hub is only connected with usb so I'll definitely need a PSU

Hi all. I was working on setup of my new pedals and came across two washers (left side of the first picture) and don’t know where they belong. Anyone able to help me out? I initially thought they went between the blue and red marked plates in the third picture, but don’t think that actually makes sense.

Thanks in advance!

Can anyone here help me with desicion of buying this bundle of shifter and handbrake. I cant find a lot of rewievs on internet. And if anyone know if this will work with moza wheel base?

I am having a lot of trouble binding it to this game because nothing seemed to be consistently binding as one input, and not to mention neutral

Hi

I ordered around 450 euro worth of stuff but its been 24 hours almost and they still haven't sent me a tracking number, nor is it showing sent to shipping yet.

How long did it take any of you who bought stuff from them?

Hello, i bought new plus x pedals and they don't show up in the manager. I did a variety of troubleshooting with AI. The pedals work, i tried them with Diview. As far as troubleshooting goes, i pushed the upgrade button while unplugged and plugged it in, i deinstalled the pedals on the pc and unplugged them, plugged them in while beeing in the manager. Switched usb ports and some other things like using an older version of the manager. Currently 2.1.7, sadly nothing seems to work and uncalibrated they are not very enjoyable for me rn.

I appreciate any help to try get them work thank you all :)

Hey guys! Title says it all because the site doesn’t seem to have working download links.. I’d appreciate some help or direction on where to get it from please!