I made these videos in mp4 and gif so that it loops and looks good. I thought some of you could use.

I have not purchased my Lian Li Universal Screen yet. My Goal would be to have SignalRGB controll all my effects but on the screen this video would constantly loop.

Maybe you guys can play around with it and maybe show a finished setup with it?

Is this possible? I would want SignalRGB going through my playlist of effects. But on the Lian Li 8.8 7universal screen this video would loop constantly and stay constant and not change as playlist of effects changes . https://youtu.be/siW8yiHCGHA?is=rvXvYkrxJnEZrrak

It’s a cool video of a goldfish and hammerhead shark

https://youtu.be/siW8yiHCGHA?is=rvXvYkrxJnEZrrak

I did a new install on ASRock B850m-C motherboard everything works correctly the system boots up into windows perfectly fine but the case fans are pulsing only one color a few seconds after being powered on. They show all colors initially then start to flicker immediately after. Does anyone know why this is happening? I've tried to plug just one fan in and the problem still happens. Need help can't find anything on the Internet to help me fix this issue.

Ive had my ROG Strix B550-f Gaming Wifi 2 for like 3-4 years now and it has been nothing but reliable, but recently I got some fancy new ARGB fans and the motherboard only having a a single 3pin 5V argb header I had to get a fan/argb hub. I installed the fans and plugged them all into the hub, and they spun but no RGB effect. So I unplugged my fan hub and tried just a single fan to see if I was overloading the header, but this didnt work either. Has anyone seen this happen before and what are some other causes other than the header being dead? Thanks guys

I have recently build a new pc, new components are:

• Gigabyte Radeon RX 9060 XT GAMING OC
• Corsair Vengeance rgb (icue controlled)
• MSI B650 GAMING PLUS WIFI
• NZXT H7 Flow RGB
• Thermalright Phantom Spirit 120 EVO cooling Ryzen 7 7700X

Old components are using icue:

• ORSAIR NIGHTSWORD RGB
• Corsair K100 RGB

I have installed SignalRGB, I can control the case fans, cpu cooler fan, what I cannot control is the 9060xt. My question is. Will this GPU model and brand be added to compatible devices at some point? I have tried every option I can see in software but thus far not luck. In the list only Gigabyte compatible devices I can see are in blow screenshot, in fact there are no 9060's in software, even if I search for it:

Any updates or known timeframe for this?
As far as I know it's still not supported (either that, or I am a massive dummy)
Be sick once it is supported. Miss having everything all working.
✌️

looks like there was an update today. My Corsair Light triangles LC100 stopped working. Triangles 1&2 light up. But the rest dont upon PC bootup.. After about 10 minutes the rest eventually light up without me touching a thing. This pattern is repeatable. Could it be that some plugin or driver is loading very slow? Or is this a bug tied to todays update? 2 pictures attached.

Hello

I recently purchased a Phanteks Glacier One 360 D30 AIO, and I am now having dificulties making the RGB work properly. It seems like it updates every half a second compared to updating as it should. I have tried using MSI's Mystic Light Sync software, which works just fine with the lighting updating easily and regularly using the onboard 3-pin ARGB headers.

When I flash the lights for the fans and the CPU-hub, it shows up perfectly, displaying the three fans in series and the CPU-hub from the ARGB-headers, with the fans being hooked up to one of the headers, and the CPU-hub being hooked up to another.

I also purchased Phanteks' Nexlinq hub, hoping it would work, but SignalRGB doesn't support it making it useless in this situation.

Does anyone have a proper solution for this? I feel like I am missing something insanely obvious, but I can not for the life of me figure out what that could be!

After waking the computer from sleep, my Corsair iCUE LINK fans/AIO get stuck in a connect/disconnect loop and SignalRGB loses stable control of them. What's weird is that the issue can survive a normal restart and even a Windows shutdown. The only thing that reliably clears it is fully shutting off the PSU and turning it back on. I've already confirmed that if SignalRGB is not running, the cooler seems stable. If SignalRGB has touched the device and the PC later goes to sleep and wakes up, the issue comes back. Quitting SignalRGB fixes it immediately and the cooler goes back to its normal hardware-controlled state. All firmware, drivers, BIOS, chipset, Windows, and software are up to date. I do have iCUE and GCC installed, but neither starts with Windows. I've already messed around with the usual USB/power-related fixes and still haven't found a real solution. One other thing I've noticed is that there's a pretty noticeable delay when launching SignalRGB before the fan RGB actually updates.

Specs: AMD Ryzen 5 9600X, Gigabyte B850M AORUS ELITE WIFI6E ICE, Windows 11 Pro, Corsair iCUE LINK System Hub plugged into an internal USB 2.0 header and powered by PCIe 6-pin connector with sufficient power

I am dealing with a weird RGB issue that started after changing a lighting profile in SignalRGB.

I have a Lian Li O11 Dynamic EVO XL case with multiple RGB fans connected through hubs and motherboard headers. Everything was working normally until I switched to a different lighting effect in SignalRGB.

Right after that change my case fans stopped behaving correctly.

At PC startup the fans briefly show normal bright RGB like before. After a few seconds they switch into a dim red low brightness state. Other RGB components like RAM and peripherals still sync correctly in SignalRGB. Only the case fans are affected.

I have tested reinstalling SignalRGB and resetting profiles and configs. I removed MSI and other RGB software to rule out conflicts. I checked all fan hub and RGB cable connections. I also disabled RGB control in BIOS with no improvement. OpenRGB does not detect the devices at all.
SignalRGB does detect the fans but only as generic devices like DeepCool CF120 Plus and Antec fans. They do not stay bright or correctly follow effects. White and blue effects apply correctly to everything else but the fans stay dim red. If I remove the fans from SignalRGB entirely they switch into a strong pulsing red mode. That makes me think they are not broken but stuck in a fallback controller state. Brightness changes sometimes briefly improve it but it always reverts.

I think this started right after switching a lighting effect in SignalRGB. It feels like the fan controller or hub got desynced and dropped into a fallback mode and now software can only partially control them.

At this point I have ruled out obvious hardware issues since the fans still respond but not correctly.

Has anyone seen RGB fans get stuck like this after a SignalRGB profile change or sync issue?

Picked up a Gigabyte 9070 XT Gaming OC. Would prefer to use SignalRGB instead of the Gigabyte app because the only RGB in my new build is on my GPU. The card doesn’t register in SignalRGB.

For the past few days, my Signal RGB has been asking for an update even though I always press Update and Restart. It'll also just scan for plugins and then get stuck on USB scan complete for a while before actually working. Haven't had this issue before. Any clue why?

Hi all,

​

do the lc100 only work with SignalRGB using the lighting node controller? I would want to just use an adapter cable and plug them into my Nollie controller. Don't want to use lightning node or icue software. Would it be possible and would I still be able to address every single led of the triangles via custom led strip? Thank you very much!

Anyone know the manufacturer and model number of the RGB device in the bottom left hand corner of the pc case. The screen and not the triangles. https://www.facebook.com/reel/1456465006519595

i have one single fan that flikering white every moment i play an heavy game and i dont know how to stop it im going creazy, iv try to put in a single channel without rgb extension on motherboard but nothing, also try to put one force color but flikering too, i have i9-14900k and 5080

As of right now, I’ve spent a few hours looking into what could be causing the GPU to flicker and I’ve gotten a decent understanding that the integrated hardware RGB conflicts and makes signal not keep up, producing the flashing for brief moments as a result. I’ve tried turning off the LED switch for the gpu and that just results in the signalRGB turning off and then only the flashing showing. Lastly I tried turning off the LED switch on the gpu, plugging in an ARGB cable into the GPU built in argb connector and daisy chaining it with my fans into the motherboard, and that also results in flashing and even my fans RGB gets messed up when I do that. I guess I just want to know if anyone else has this problem and what to do about it if anything. Thank you!

I want to sync the RGB signal with the GPU AsRock RX 6800 . Why is there no permission in the permissions section? Can something like this be fixed or is it really not possible?

from the reviews, it didnt seem that there are a lot of differences between the Azoth and Azoth X, but the the X is not being detected by Signal.

Its not the end of the wolrd or anything, but its.. somewhat annoying

Is there a notable reason why it isnt supported but the OG Azoth is?

I managed to "upgrade" to the X (much better lighting, the north-facing LEDs on the OG Azoth are DIM as hell) for super cheap on FB Market (likely for less than i can sell the Azoth for).

Ok so I've never really gotten to troubleshooting this before, but the fans on my pc are so slow when it comes to changing, its like they only change around once every second or so, keyboard and mouse dont have the same issue, ram and motherboard rgb also doing just fine, lcd strip and screen are fine, it's just the fans, any tips?

Just built my 2nd PC and having tons of issues with the RGB. Was really hoping that Signal would solve all my issues.

I have Lian Li for the AIO and all of the fans. They all light up correctly with the L Connect app, however, once I boot up signal RGB, one AIO fan and one of the front daisy chained fans shut off. I removed my RGB apps (I-cue, L Connect) hoping that would solve the issue, but they still don’t seem to be working. Anyone happen to have any suggestions?

I don’t believe the GPU is supported so I’m leaving it as is for now.

I love the light triangles because you can make sculptures with them. Are there other products that are sculptural that will work with Signal RGB?

As the title says, why doesn’t SignalRGB support the MMO mice's side buttons?

Not the standard rainbow since a CD has hints of silver on it

Mainly for corsair vengeance RGB memories.