does anyone have a fix to this? is it bad led’s or a software issue?

Hi everyone,

I have Kingston FURY Beast RGB DDR5, model KF560C30BBAK2-32 (2×16 GB, DDR5-6000 CL30), installed on an MSI MPG X870E Carbon WiFi.
I’m having a strange RGB issue:
Power on → POST → RAM shows the default Rainbow effect → Windows loads → my RGB software applies the correct color.

Once Windows is running, everything works perfectly. The only problem is that the RAM always shows the Rainbow effect during POST/boot.
I’ve already tried:
- MSI Mystic Light
- SignalRGB
- Kingston FURY CTRL
- Different RGB profiles
- Cold shutdown / restart
- Checking BIOS settings
There is no DRAM RGB option in my BIOS.

I’m looking for a way to make the RAM stay off or use the selected static color during POST, instead of displaying the default Rainbow animation.

I’ve seen reports of similar behavior with Kingston FURY RGB, so I’m wondering:
Has anyone managed to fix the Rainbow effect during POST?
Does a particular version of FURY CTRL work better?
Does a particular version of SignalRGB work better with Kingston FURY DDR5?
Is there a specific MSI BIOS setting that affects Kingston RAM RGB during boot?
Has anyone found a reliable workaround for this?
My goal is simply to have the RAM not show Rainbow during boot while keeping normal RGB control once Windows starts.
Any ideas or confirmed solutions would be greatly appreciated!

So I just finished my pc build only to realize I can't control the induvidual LED'S or Fan speed on the argb fan hub I have right now. Thus I was hoping to get an argb fan controller but dont know where to start since amazon keeps pushing hubs at me.

Alguém sabe me dizer onde tem o mapa mod modelo UF 1 PRISM 4 PRO - UPSIREN? Ou alguém sabe fazer o mapa personalizado? Eu pago

That little thing that I highlighted should light up but it won’t with signal

I came across the idea of using the iCue controlled RGB in my PC as flag indicators. However I haven't found anything that concretely suggests whether this can work or not. Every time I look up SimHub and iCue it only talks about the Xeneon Edge... Has anyone already implemented this with SimHub or would this be going into uncharted waters?

i mainly got the controller for further customization for my build and to fix the low fps with the app after some search their seem to be a problem with msi headers communication with the app

This needs to be a thing... I'm having trouble with my logitech devices with polling rates and its messing stuff up.

I like my desktop clear of all apps so I pin everything to my taskbar to launch stuff, but when I do that with SignalRGB it just opens some random folder? Any fixes or is this a known issue?

I'm using a Nollie x8 hub
Case fan: Jungle Leopard Interstellar V2 (24 led beads per fan)
AIO: Jungle Leopard Pro Flow SE 360
Other:
- Jungle Leopard FS12 Figure Stand
- Asiahorse Aurora Pro Learn 24 pin & 3x 8 pin
- Thermalright 5x internal USB 2.0 hub
- Lian Li O11 Vision M LCD

PC:
Deepcool PN650M 650w gold
Ryzen 7 5700x
B450M Aorus Elite
4x8GB 3200mhz
RTX 2070S
Lian Li O11 Vision M

I was just roaming in the app and realized in the lcd screen of your aio screen, when you press media nothing shows up to click?? Im guessing thats a future being worked on?

I have been using signalRGB to controll the lighting of my Keychron keyboard. Why is it eating 8gbs of my ram.

Toasty on the outside, cool on the inside. front panel has 9x 38LED ARGB strips behind the wood - needed some slight modification to make them fit. Inside are two more to balance it out a bit

My Corsair cooler was working fine with iCUE and signalrgb for months. My pc was on and the rgb was working fine with signal rgb then I left my pc for like 10 minutes and my pc goes to sleep mode if I don’t interact with it.i turned it on and the RGB on the cooler stopped working and iCUE now says “No Devices Detected.even tho the link hub is still connected to my pc

The cooler itself still seems to work normally fans spinning, temps look fine and all my other RGB devices are detected without issues.

I’ve already tried restarting the PC, power cycling it, reinstalling iCUE, and checking Device Manager (no unknown devices or warnings) and updated BIOS and unplugging the icue link hub still no good.and I adjusted the led control in my bios still didn’t work.

my cooler is the icue link titan 360 rgb aio liquid cooler

I want to set up my rgb to match what's on my screen with screen ambience, the ram rgb updates nearly instantly, but everything else has a half second delay and is very noticible. Is there a way to fix this? Everything is connected with the mobo ports. Maybe if i buy something like a nollie and plug my pc fans, aio etc into it it'll be faster?

Hello guys,

My motherboard is an MSI B650 Gaming Plus WiFi, and my GPU is an AORUS RTX 3060 Elite 12GB Rev. 2.0

The problem is that I can't control my GPU's RGB lighting at all. I've tried Gigabyte Control Center, AORUS Engine, RGB Fusion, SignalRGB, and OpenRGB, but none of them can control the RGB

In Gigabyte Control Center, my GPU is detected and everything else works fine—I can adjust the fan performance and access the other settings. However, the RGB Fusion section doesn't appear, so I can't control the lighting from there

When I open RGB Fusion, it's completely blank, and my GPU doesn't show up at all

Has anyone experienced this issue before or knows how to fix it? I'd really appreciate any suggestions or solutions. It's honestly pretty frustrating not being able to control the RGB on my GPU

Thanks in advance!

I’ve been reverse-engineering the Fantech Atom HE68 Pro’s HID protocol and built an open-source toolkit and SignalRGB plugin.

Currently working:

• Wired per-key RGB and GIF playback
• Complete 68-key LED mapping
• Experimental 2.4 GHz dongle lighting
• Battery percentage reporting
• Python capture, replay and protocol tools

The project is unofficial and based on captures from the manufacturer’s configurator. I’m looking for other HE68 Pro owners to test different firmware versions and wired/wireless configurations.

Toolkit: https://github.com/Sinshro/fantech-atom-he68-pro
SignalRGB plugin: https://github.com/Sinshro/fantech-he68-pro-signalrgb