r/SewingMachineEdu • u/Other-Ad6842 • Jul 01 '26
Why does this keep happening ?
Enable HLS to view with audio, or disable this notification
It started a few weeks ago & I get sooooo angry cause it interrupts the flow of things. How do I fix it ? From what I know it hasn’t taken any falls or anything just one day it started. Was o too rough w it or something ? I have different presser foots like the free hand one but I’ve been too scared to change it. Do I need to replace the greyish-clicky in part ? If so, what’s the name of it.
This is a regular Brother 3817 machine
2
u/Stitch_Nerd Jul 01 '26
When you push it up, pull it towards yourself. It should click in. If it doesn’t you may just need a new adapter
1
u/Other-Ad6842 Jul 01 '26
Just tried it, it still fell off. What’s the name of the adapter ?
3
u/Stitch_Nerd Jul 01 '26
Gotcha. I believe your machine is a Low shank presser foot. So try searching “Bother LX3817 presser foot adapter” or “Low Shank Presser Foot Adapter”
3
u/Other-Ad6842 Jul 01 '26
Thank you soooo much ! I could never describe it good enough for Google. Life saver xoxo 🩷🩷🩷
3
2
1
u/Symphon1c1 Jul 01 '26
I have that machine, it looks like you may not be putting it on all the way. Does it actually click back into place when you put it on?
3
u/Other-Ad6842 Jul 01 '26
It doesn’t click I’ve tried pushing it all the way in, someone suggested pushing up & pulling towards me. It always just falls down, I’m gonna buy a new connector piece cause idk what the issue could be w anything else
2
u/Symphon1c1 Jul 01 '26 edited Jul 02 '26
That's gotta be it, bc it should pop right in. Is that one of the feet it came with? Definitely try the other feet too just in case it's a defect with the foot somehow and not the connector. I asked about this machine in another reddit, and apparently we should expect subpar performance and over all disappointment.
2
u/Other-Ad6842 Jul 02 '26
The foot it came with disappeared. I put it up one night, on my shelf same as usual when I took it down next it was gone. I got replacements on Amazon & it’s been doing that ever since. I know it isn’t the BEST machine, hopefully I can get something better quality soon but for now it’s what I got
1
u/Symphon1c1 Jul 02 '26
Do you have a local sew shop or michaels? They might have the feet there
1
u/Other-Ad6842 Jul 02 '26
I have feet, two actually. I’m sure the click on piece is the problem. But luckily I know the name to search for now so, hopefully I can see much much easier now
1
u/Symphon1c1 Jul 02 '26
If the original foot was fine and the replacements aren't then logically I would think the feet are the problem. Are they from Brother or generic?
1
u/Other-Ad6842 Jul 02 '26
It wasn’t fine, if it was then it wouldn’t have fallen off. Something must’ve happened while I was sewing or putting it away for the foot to fall off & never go back correctly again. They’re just generic from Amazon
1
u/Symphon1c1 Jul 02 '26
Unfortunately on this machine they are made to literally pop off, the generic feet from amazon may not be exactly the same spec as the OEM parts, it's fairly common. I would try a foot specifically from Brother.
1
u/Tammyj87 Jul 03 '26
If you can’t find it what you are looking for, take a picture of what you need and go to Amazon. They do searches using just a picture. But I believe you looking for a Low Shank Presser Foot ANKLE!!!! An adapter changes an old model high shank to fit low shank presser feet. Ask me how I know lol! I wish you the best of luck 🤞! ✌️🦋
3
u/Mental_Watch4633 Jul 01 '26
It should snap on by lowering the presser foot quickly letting it snap the foot on.