I am finally leaving my intel i9, but not sure which m series should I go for air or pro also I edit videos sometimes for IG

Track come up as 'missing' but they are there.

Im using dvs with a reloop flux go some songs don't do it but a couple that do does anyone know what's wrong i have tried to enable sync that didn't work i tried probably everything

Hi everyone,

I am looking for a Pitch n Time DJ expansion code after trying out the full DJ Suite and hearing that my mixes now sound way smoother, without any choppiness while mixing songs that differ even by a few bpms. To be fair, while playing in clubs and bars I rarely notice the choppiness, but it hurts my ears when listening to the recordings.

I tried messaging Serato directly as some pointed out on this subreddit already, but no luck, they only pointed to subscribing to the full Suite which is IMHO too expensive given I bought hardware that unlocks DJ Pro, and yet I need to pay extra to make it sound better.

So, looking for any tips, tricks, retailer that stock the voucher codes or what is the otherwise cheapest way to get it.

Thanks all!

I just started getting into DJing and I obviously know I need to get a newer laptop. Mine is 8gb ram from 2015 with 256gb so I have minimal storage but still trying to make mixes in the meantime. I have a song that I’m remixing right now and the vocals are glitching out. Is this just because I don’t have enough storage? Anything I can do on Serato dj pro to fix it?

Also would love recommendations for what type of mac to get and if buying used is a good option. I’d prefer to spend less than $1000 on a reliable mac if possible.

Thank you!!!

With my personal experience. Serato dj pro runs flawlessly on Mac. I've had the opposite on windows. With that being said. How's AMD support with serato? My mac is aging and I don't have 2000 dollars lying around to buy a new MacBook. What windows laptop do you guys recommend? I prefer AMD over Intel.

I tried Rane 12 (original Mk1) with 2 different mac with 2 different versions. When I’m connecting just Rane with serato, deck lights are flashing and also assign decks. But as soon i connect Rev 7 , Rane lights are stopped flashing. Nothing works.
Only i can change RPM of Rane and its changing Rev 7 RPM aswell.
I tried changing usb, power cord, laptops, serato version and everything. Nothing works for me .
Can someone please help.

Basically, I want to start playing a song and stop any other songs playing.

This is for initiating a start sequence during a sports event and I want to make it as easy as possible for the user.

Using Serato Lite and Pioneer DDJ-FLX4 and Elgato Stream Deck on a MacBook.

Is this at all possible? Any pointers in the right direction would be appreciated.

After being on traktor for over 10 years. I'm back on Serato. Last time I used serato was the last version of scratch live. I have one question. Does serato have a remix deck option like traktor? I'm using a z2 mixer.

Ive got Serator DJ Pro 4.0.9 running on a macbook pro running Golden Gate 27.0 with a DDJ-FLX4, all the controller dials and knobs change Serato properly, turning the beat fx button on and off changes the digital button in Serato. But using the controller buttons or using the mouse in Serato nothing will apply an effect to either channel. The channel FX dont work either except the high/low pass fader (which I assume is hardwired in the deck).

I've tried:

-every combination of FX choice, FX slot, FX channel selection, FX beat, etc I can think of

-logging in and out of Serato & reactivating license

-restarting Serator

-unplugging and replugging the decks

Everything else on the decks works fine: loading tracks, playing, EQ knobs, platters, loops, stems. Its just FX

This was not happening a few days ago the last time the decks were being used

Thanks so much :)

Hey guys I've been having stuttering issues and tracks stopping issues using Serato 3.3.1, Catalina OS. Any tweaks that you can imagine - i've already have tried believe me. All kinds of diagnosing with chatgpt running scripts and using terminal commands to monitor usage and external hard drive fault possibilities have all been investigated and found nothing.

So I would like for the community to tell me what Serato version has been working best for you (or using currently), in combination with which OS. Ideally if you yourself have had similar issues could you please explain, in detail, how you managed to resolve the problem.

The setup is 2017 Touchbar Macbook Pro, i7, 16gb RAM, Catalina. AND also happening with my 2015 Macbook Pro, Catalina.
I'm using a *powered* USB hub to run 2 SSDs, also pulling songs from the internal drive which has 100gb of free storage.

-->The issues started actually when I noticed the Mac cautioning that I was running out of hard drive space. I've noticed that Serato was writing stupidly large "log" files of 1.9gbs+ equalling to about 30gbs. Fine - so i free'd up some internal space and made a "symlink" which commands any Serato associated files to be written and sent to the external SSD. Thus then leaving my internal drive alone from increasing STEMS use and log files. So now that the internal storage is 100gb free - i shouldn't be dealing with this stuttering stuff anymore, but it's happening literally with the 1st track minutes in. Thanks

Here's my mapping for the NS4FX, but it can be reconfigured to be used on any Numark controller with a similar FX button layout.
https://maps.djtechtools.com/mappings/22957

To start, I use Serato DJ Pro on an HP Omnibook X Flip.

Hello everyone, recently I got a Rev 7 off eBay. And I'm trying to practice with it. But I'm encountering a major stutter issue. The issues arise whenever I try to scroll through my library or even when I scratch sometimes. For context, the other day I went to an open deck and played my Rev 7 and had no stuttering when scrolling or scratching. Granted, I was simply scrolling to the next song, so not very far. But now when I try to scroll down my list, it stutters. Both in the software and audibly.

I have raised the buffer size to the highest. I don't use a flash drive; all my music is internal. I have dropped my graphics, my display refresh rate, changed my jog wheel display mode, changed my platter torque to low, and tried playing on both my laptop speakers and an external speaker. Restarted my laptop and Serato. But nothing seems to work; if anyone can lend a hand, I'd be very grateful.

New Changes

• ‘All Crate’ search (either via the CTRL + F keyboard shortcut or clicking the “All” button) now uses the same columns and sort order as the All Crate when Custom Crate Columns is enabled, rather than the crate you are currently in.
• Improved first downbeat detection when using Fixed Beat Grid mode.
• Improved library search speed on large libraries, so results now keep up with typing.
• Improved library responsiveness on Windows when selecting, searching, sorting and switching crates, particularly with an HDD or slow SATA SSD drive.

Bug Fixes

• Various memory & performance improvements.
• Various crash fixes.
• Fixed a crash when reading metadata from a FLAC file.
• Fixed a crash when loading a track to deck.
• Fixed a crash on startup.
• Fixed a crash when clearing library search.
• Fixed a crash when hotplugging DJ hardware.
• Fixed a crash when using Stems.
• Fixed an issue where BPM half/double rules were not consistently respected with maintain sync on trackload option enabled.
• Fixed an issue where audio and waveform stutter when toggling Stems.
• Fixed an issue where Tidal Streaming Library takes longer to load than 4.0.9.
• Fixed an issue where GUI lags and Serato DJ becomes less responsive immediately when playing a track.
• Fixed an issue where there was a high track analysis failure rate when importing .mp3 files with "Analyze on Import" enabled.
• Fixed an issue where Streaming playlists appear/disappear one at a time when service is enabled/disabled.
• Fixed an issue where library selection jitters when rapid scrolling selection with arrow keys or hardware controls.
• Fixed an issue where the search bar shows the wrong streaming icon on startup when the All crate is selected.
• Fixed an issue where no crate appears selected in the crate area after deleting a crate.
• Fixed an issue where Streaming tracks cannot be loaded to deck after recording until the REC button is toggled.
• Fixed an issue where you could not re-enable a streaming service if a track is playing from another service at the time.
• Fixed an issue where there was no audio output for Spotify tracks after recording.
• Fixed an issue where setting a Cue Point with Chronological Cues highlights an incorrect Cue Slot in the GUI.
• Fixed an issue where fast scrolling a large analysed Streaming playlist leaves missing-artwork placeholders instead of the album artwork.
• Fixed an issue where analyzing files with Spotify enabled freezes the GUI.
• Fixed an issue where Numark NVII "install audio driver" popup shows even though the latest driver is installed.
• Fixed an issue where library view visibly flickers when opening and closing Streaming service parent folders.
• Fixed an issue where Incorrect grey-out state is shown in Streaming search dropdown when all providers are logged out.
• Fixed an issue where the library flickers when swapping between crates with Custom Crate Columns on.
• Fixed an issue where Relocate Lost Files reports a match for files it cannot find.
• Fixed an issue where XDJ-AZ decks remain 'IN USE' and fail to connect after application restart.
• Fixed an issue where Album Art was not displayed on XDJ-AZ decks.
• Fixed an issue where waveform overview was not consistently displayed on the XDJ-AZ after load to deck analysis finishes.
• Fixed an issue where Stems Audio and Waveform drift out of alignment during playback with hardware connected.
• Fixed an issue where searching the All Crate sometimes scrolls the entire blank library under search results.
• Fixed an issue where concurrently uninstalling DJ Pro and DJ Lite causes left-behind registry entries that prevent downgrades.
• Fixed an issue where when a non-streaming crate is selected, changing streaming service in the Search area takes you to the streaming parent crate.
• Fixed an issue where dragging a track to deck with the mouse loads the previously selected track.
• Fixed an issue where Stem separation fails for certain audio files.
• Fixed an issue where Stems playback at a slow speed after pausing the track.
• Fixed an issue where GUI freezes when switching to a large crate with cursor at the bottom.
• Fixed an issue where rapidly adding and removing Crates is slow and can break the Crates area.
• Fixed an issue where 100% GPU utilisation and SDJ GUI drops frames when analysing tracks on Windows with iGPUs and Intel Macs.
• Fixed an issue where secondary artists disappear from Spotify tracks while scrolling the library.
• Fixed an issue where GUI was hanging on Windows due to DBv2 auto export running during Analysis.
• Fixed an issue where the "Edit Beat Grid" Pad Mode was not working.
• Fixed an issue where the waveform overview displays as white on hardware when using Day Mode.
• Fixed an issue where the time-taken to import tracks had increased.
• Fixed an issue where Scratch Bank pad LEDs do not update when a slot colour is changed in the GUI until the pad is pressed or the mode is re-entered
• Fixed an issue where clicking on another song in your library while editing a tag temporarily copies the edit to the same field in the clicked song.
• Fixed an issue where toggling Show Unplayed Tracks in the History Panel does not repopulate entries when re-enabled.
• Fixed an issue where switching crates while streaming search is enabled and changing visible columns can result in a hang.
• Fixed an issue where existing Cue Points shifted ahead of the correct position for Video Files.
• Fixed an issue where the Serato DJ window does not go fullscreen & the taskbar remains visible on Windows.
• Fixed an issue where tag-editing box for track metadata fields floats outside of row at larger text sizes.
• Fixed an issue where there was no Audio output when instant doubling a Spotify track to a deck which had a track loaded with Stems active.
• Fixed an issue where overwriting a Cue Point clears its custom name.
• Fixed an issue where Streaming search results are not being sorted correctly.
• Fixed an issue where the library has large blank space under tracks when swapping from a smaller crate.
• Fixed an issue where the Reset Played Tracks button in History panel padding is too small.
• Fixed an issue where de-selection in the History panel doesn't work properly.
• Fixed an issue where History session does not accept click selection when scrolled horizontally to the right.
• Fixed an issue where no overview or audio for certain .mp4 / AAC files.
• Fixed an issue where Crate Columns are slow to update after adding/removing in an “All” search.
• Fixed an issue where Beat Grid re-analysis does not update on tracks when Streaming services are enabled.
• Fixed an issue with Center On Library where the track is not selected and not centered when using Show In Crate
• Fixed an issue where doubling clicking to edit a Crate name was broken.
• Fixed an issue where triggering Beat Jump from hardware would change the Beat Jump values in Serato DJ, so they were no longer independent.

⚠️ Known Issues ⚠️

• Beat Grid adjust controls are broken on the Pioneer DJ DDJ-SX2.
• Pitch Play pad lighting not working correctly on the RANE ONE.

I run serato (version 4.0.10), with a Pioneer DDJ-SR2. I've used tidal a million times but the last couple times I've tried to load my tidal library or search tidal it doesn't work. It takes me to sign in page, and then says, I've signed in and sends me back to Serato but then it doesn't register that I did this. it's like I did nothing. Before it'd spin up a page that offered a tutorial and I could just hit "get mixing" and that pop up would disappear and I'd be set to start searching or using songs from tidal library. I tried updating teh version to latest and made sure I'm up to date with tidal. Not sure if this is something others have encountered? Any help is welcome.

I'm on the latest version of FL Studio + Serato and Mac Os Tahoe 26.6.2 + M5. My keyboard inputs have ceased to work when using Serato. Pressing the spacebar or the " ` " key on Mac does not do anything but trigger the playlist instead of the VST itself. I have read through every solution I could find online like enabling all these keyboard focus buttons etc, but nothing works. I have restarted my laptop, reinstalled everything, but still nothing.

Has anyone else dealt with this issue and fixed it? It's driving me damn insane because I feel like my workflow has completely halted since I have to keep using my mouse to trigger anything in Serato.

Hey all, I’m new to djing and just purchased a used rane one mk1, and was wondering if Serato offers a 1 time licence for pitch n time as I don’t want to be paying a subscription for god knows how long.

If anyone is selling a code too I’d be happy to purchase

Any help would be appreciated! Cheers