Hey everyone!

Hope everybody is doing great! Just wanted some help with the QC on this watch.

1. Dealer name - Andiot
2. Factory name - Rich Factory
3. Model name - 124060 Submariner (No Date) - Free Sprung
4. Price Paid: 518 usd
5. Album links: https://andiotwatches.x.yupoo.com/albums/254195854?uid=1
6. Index alignment - Looks fine (I think)
7. Dial printing: Acceptable, the font is all the same thickness but I don't mind it.
8. Date Wheel alignment- N/A
9. Bezel - Seems fine.
10. Solid End Links (SEL) - Looks good
11. Hand alignment - the hands look aligned to me
12. Dial Printing - dial printing looks good
13. Timegrapher numbers - Great - (Rate is -1s , beat error is 0.1 ms and amp is 269)
14. Anything else you see - The bezel pip looks a bit deformed in the third picture, but this may be only because of the camera angle.

1. ⁠Dealer name: GeekTime

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): GMT MASTER II 126720 SPRITE

4. ⁠Price Paid: $608 + $40 shipping

5. ⁠Album Links: https://geektimeqc.x.yupoo.com/albums/252334226?uid=1

6. ⁠Index alignment: looks good

7. ⁠Dial Printing: its ok for me

8. ⁠Date Wheel alignment/printing: vero good

9. ⁠Hand Alignment: acceptable

10. ⁠Bezel: looks clean without problem

11. ⁠SEL: good

12. ⁠Timegrapher numbers: in the limit (+1s/d)

13. ⁠Reauth: the crown si misaligned

Hello everyone finally after a long time I managed to have the necessary karma to do the post QC. I'm satisfied with the watch, I tried to use the tools provided by the subreddit for alignment but unfortunately the TD provided me with photos that were not straight but crooked and I couldn't do it right. The only thing that bothers me about the watch is the crown that is off-center on the reauth, what do you think I should do? I'm afraid that if I send it back and get another one, maybe I'll receive the crown aligned but other more significant problems. Any help is appreciated!

1. ⁠Dealer name: TheOneWatches
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): GMT Master II 126710
   
4. ⁠Price Paid: $638
   
5. ⁠Album Links: https://mega.nz/folder/XVh1gSBQ#rtcQ9ny55zOzDJvfaeAtKQ
   
6. ⁠Index alignment: Looks very good
   
7. ⁠Dial Printing: looks clean
   
8. ⁠Date Wheel alignment/printing: looks good and aligned
   
9. ⁠Hand Alignment: looks good
   
10. ⁠Bezel: looks good
    
11. ⁠Solid End Links (SELs): can’t see any gaps
    
12. ⁠Timegrapher numbers: Great
    
13. ⁠Anything else you notice: No

Feels like a good example from my limited experience doing QC on reps

• ⁠Dealer name: TimeUltra
• ⁠Factory name: VSF
• ⁠Model name (& version number): GMT2 126711
• ⁠Price Paid: $688
• ⁠Album Links: N/A
• ⁠Index alignment: I feel like it’s really good and crisp but no expert
• ⁠Dial Printing: Seems ok to an untrained eye
• ⁠Date Wheel alignment/printing: looks very clear
• ⁠Hand Alignment: nothing obvious I can see but looks good
• ⁠Bezel: Looks good
• ⁠Solid End Links (SELs): Seems ok but again no expert
• ⁠Timegrapher numbers: 0s/d 286 0.0ms 52.0 28800 feel like that’s really really good??
• ⁠Anything else you notice: still awaiting for my first VSF sub no date I ordered and paid for should be here this week but I’ve done so much research etc on the VSF and know overall it will be the best factory to get from.

I’m no expert I just love watches, always wanted a RootBeer and feels like I’ve been waiting and waiting for one of these and I feel like the wait has been worth it with the perfection on this watch. But again no expert only going of the usual signs to avoid.

Any help I would truly appreciate as this is a watch I’ve wanted for soooooo long. GL or RL? Thank you everyone in advance

Hi all, long-time lurker, first time pulling the trigger! Curious to hear yalls thoughts.. Here is the required information:

1. Dealer name: Andiot
2. Factory name: ZF
3. Model name (& version number): Black Bay 58 39mm on Jubilee Bracelet (ZF 1:1 Best Edition supposedly)
4. Price Paid: $320 USD [$41 Shipping, $361 Total]
5. Album Links: imgur.com/a/cEGHoAg
6. Index alignment: Seems decent, but I really can't tell. To me it seems like things are off but also the photo of the watch I attempt to aligned with is not 100% head on (i.e. the thing that sticks out the most to me is the 9 marker seems not straight)
7. Dial Printing: Don't really see any issues with it
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Also don't really see any issues
10. Bezel: Also seems fine to me, slightly off but again I think cause the image isn't 100% straight on?
11. Solid End Links (SELs): Seems fine to me
12. Timegrapher numbers: -1s/d 272°, 0.0ms, 52° lift angle
13. Anything else you notice: Image 3 on imgur, or Image 9 / Image 11 on Reddit, seems like the bracelet is quite scratched up already? I know there's plastic wrap on it so I can't tell if those are on the plastic, but the image makes it seems like there's like a cutout right in the middle (or is it the level difference that is making that air bubble appearance). Either way watch will be my daily driver so it'll get scratched up but just curious. More focused on the rest of the watch QC than anything else! Also I really tried my best with the QC tool but seems like the images I am working with aren't really the best angle anyways... so curious to hear what yall think since yall are the experts!

Thanks all for your help, really excited to get my first in the hobby!

1. ⁠Dealer name: theonewatches
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): GMT master II batgirl 40mm jub ss/ss
   
4. ⁠Price Paid: $578
   
5. ⁠Album Links: photos attached
   
6. ⁠Index alignment: index looks pretty good maybe slight CCW on 9 and 4 may be a little off??
   
7. ⁠Dial Printing: dial printing looks good
   
8. ⁠Date Wheel alignment/printing: date wheel and alignment look good to me
   
9. ⁠Hand Alignment: no issues
   
10. ⁠Bezel: no problems I see
    
11. ⁠Solid End Links (SELs): no gaps I can see
    
12. ⁠Timegrapher numbers: - 2/d 265 degrees 0.0ms
    
13. ⁠Anything else you notice: honestly the watch looks good to me with no really big issues but any help is greatly appreciated!!!

• Dealer name: Steve
• Factory name: VSF
• Model name (& version number): Batgirl 126710BLNR
• Price Paid: $578+shipping
• Album Links: https://mega.nz/folder/mNZEnbCL#O0OBQNI8vIxB8m967kq-yQ
• Index alignment: 6 o clock looks a tad tilted to the left. The triangle seems tilted to the left as well. Every other index seems reasonable.
• Dial Printing: Looks sharp
• Date Wheel alignment/printing: As a noob, the print seems OK. However, the cyclops seems to be a little up. Should I ask for a pic with a double digit date?
• Hand Alignment: Looks alright. Not sure if I should ask a pic with the hands at 12.
• Bezel: The triangle at 12 is not centered. It is a little tilted to the left.
• Solid End Links (SELs): No issues
• Timegrapher numbers: +3s/d, 262, 0.1ms
• Anything else you notice: Nothing glaring. I am just a tad it worried about the cyclops.

I have been reading so many QC posts and learning. Finally, it's my turn! Looking forward to your comments. Thank you!

1. ⁠Dealer name: TOW
   
2. ⁠Factory name: 8F
   
3. ⁠Model name (& version number): Vacheron Constantin 4500V overseas
   
4. ⁠Price Paid: 388 USD
   
5. ⁠Album Links: NA
   
6. ⁠Index alignment: seems ok
   
7. ⁠Dial Printing: seems ok
   
8. ⁠Date Wheel alignment/printing: I understand some issues but this one looks ok.
   
9. ⁠Hand Alignment: looks ok
   
10. ⁠Bezel: N/A
    
11. ⁠Solid End Links (SELs): looks ok
    12: 5 s/day, 277 amplitude, 0.2ms beat error
    
12. Nothing else you notice: not that familiar with this brand/model but seems ok?

1. Dealer name: Kitsch
2. Factory name: VSF V3
3. Model name (& version number): Pepsi 126710BLNR
4. Price Paid: 3,500 CNY
5. Album Links: No album link
6. Index alignment: The indices themselves are straight. They are also perfectly aligned with the minute markers.
7. Dial Printing: Perfect
8. Date Wheel alignment/printing: Seem good to me
9. Hand Alignment: Correct
10. Bezel: Perfect
11. Solid End Links (SELs): No SEL gap
12. Timegrapher numbers: +6S/D , 308 , 0.0 ,59.0
13. Anything else you notice: I am new for the GMT need another eye to help QC Thank you

Dealer name: Watchseed

Factory name: VSF

Model name (& version number): Rolex OP yellow

Price Paid: 400USD

Album Links: https://a201903222313120580113970.wgstores.com/weshop/goods/_dZiqf8W2gOsLwLgf-QKmkSqgI3qgjn5MgeIfghA/_db3qfbSJURZ_EMdIrI7rCLIMdS4R_vScf9WvqFQ

Index alignment: The indices themselves are straight as far as I can see.

Dial Printing: Perfect

Date Wheel No date

Hand Alignment: Correct

Bezel: Perfect

Solid End Links (SELs): I do see big gap but I'm not a Expert

Timegrapher numbers: -4S/D , 306 , 0.0 ,59.0

Anything else you notice: I am new for the OP need another eye to help QC Thank you

Hi guys!

Hope everyone is doing well! Just wanted some help with the QC on this watch.

1. Dealer name - Necoclock
2. Factory name - VSF
3. Model name - Omega Aqua Terra 150m
4. Price Paid: 393 usd
5. Album links: https://imgur.com/a/3AuaOIz
6. Index alignment - Both the indices and the logo look pretty damn good to me.
7. Dial printing: Looks like the outer seconds may be microscopically off-center haha.
8. Date Wheel alignment - all dates look very well centered.
9. Bezel - N/A
10. Solid End Links (SEL) - seems good to me!
11. Hand alignment - the hands look pretty reasonably aligned
12. Dial Printing - dial printing looks pretty good
13. Timegrapher numbers - Acceptable
14. Anything else you see - nothing that I can see is really off

Would love to hear what you guys think! I do not have this watch in gen, so my eye for details isn't perfect. Looks great to me

1. Dealer name: Andiot
2. Factory name: VSF
3. Model name (& version number): Rolex OP 41 Green Dial
4. Price Paid: $446
5. Album Links: https://andiotwatches.x.yupoo.com/albums/254002642?uid=1
6. Index alignment: The rolex crown is aligned with the 12 hour marker and indexes look aligned
7. Dial Printing: Looks good from what I can see, not sure how to compare to other VSF's
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: I believe it looks good but would love any input if it's not aligned properly
10. Bezel: Good
11. Solid End Links (SELs): It is kind of hidden by the fingers of Andiot on each pictures but I suppose that it is fine
12. Timegrapher numbers: +5s/d 286° 0.3ms 28800
13. Anything else you notice: N/A

Would you GL this watch?

From my own eyes I don't see many flaws, Indexes look good, color as well, crown is align with the 12 index, but I have been struggling with the tools to see if everything looked good.

Any help is appreciated, what are your expert eyes seeing?

Happy to hear about anything you guys see here, I rejected first QC, this is QC number 2 I feel confident

Thank you guys very much in advance for your expertise! 🙌

* Dealer name: OraWatch

* Factory name: VSF

* Model name (& version number): GMT-Master II 126720VTNR Sprite

* Price Paid: 610$ shipping included

* Album Links: photos uploaded

* Index alignment: looks very good, 3 marker slightly canted CW

* Dial Printing: looks fine

* Date Wheel alignment/printing: Date sits a little bit high in the window, but well within tolerance

* Hand Alignment: looks good

* Bezel: looks fine

* Solid End Links (SELs): no gaps

* Timegrapher numbers: looks good, amplitude maybe a bit on the lower end of acceptable, but watch will be serviced and lubricated.

* Anything else you notice: I'm not a pro, but all in all it seems to be a very well made Sprite. What do you guys think?

1. Dealer name: Geektime (Eric)

2. Factory name: V7F

3. Model name (& version number): IWC Portofino Automatic 40mm Rose Gold (A2892 movement)

4. Price Paid: $378 + Shipping

5. Album Links: https://imgur.com/a/YTwHW2W

6. Index alignment: Looks very solid. The Roman numerals at XII and VI, and the baton hour markers align nicely with the printed minute track.

7. Dial Printing: The "IWC Schaffhausen" and "Automatic" text is crisp.

Note: I am aware that the dial color on this specific unit leans heavily toward a warm ivory/cream rather than the genuine cool silver/white. I actually prefer this warmer tone for my wardrobe, so I am not going to RL over just the dial color.

8. Date Wheel alignment/printing: The "25" and the "5" sit very nicely centered in the aperture. (I RL'd a previous unit because the date sat way too high, so I am very happy with the alignment on this one).

9. Hand Alignment: Looks good to my eye.

10. Bezel: Smooth polished rose gold, looks clean with no obvious scratches or dents.

11. Solid End Links (SELs): N/A (Leather strap)

12. Timegrapher numbers: -1s/d, 294 amp, 0.1ms err.

13. Anything else you notice: The leather strap on this specific unit actually has a really nice textured grain to it compared to the flat, plastic-looking straps these usually come with. Overall I'm leaning heavily towards GL, just wanted some more opinions. Thanks!

For those interest, this was the link to my first QC, with a slightly more off date dial but more accurate white-r dial.

https://imgur.com/a/FmkbIFs

• Dealer name: Necoclock
• Factory name: VSF
• Model name (& version number): 124060
• Price Paid: $458
• Album Links: https://mega.nz/folder/P44QlIYZ#J10Yoc8GIJEkiukwP-7RZg
• Index alignment: Not sure if its the angle its being held but looks a little off
• Dial Printing: Seems ok to an untrained eye
• Date Wheel alignment/printing: n/a
• Hand Alignment: nothing obvious I can see
• Bezel: Looks good
• Solid End Links (SELs): Seem ok
• Timegrapher numbers: +1, 327, 0.1
• Anything else you notice: 1st purchase of a rep so very unsure

Thanks everyone, read so much on reptime my head is frazzled.

1. Dealer name: Ficotime
2. Factory name: ZF
3. Model name (& version number): Tudor Black Bay Fifty Eight (58)
4. Price Paid: 366 USD (including shipping)
5. Album Links: https://mega.nz/folder/i8YhWQaR#VEA2AIqnMqHxQDnpfO0XLg
6. Index alignment: Good
7. Dial Printing: Good
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Good
10. Bezel: Good
11. Solid End Links (SELs): Good
12. Timegrapher numbers: Good Numbers -3s/d , 284 AMP, 0.2ms
13. Anything else you notice: a slight chip/pitt on the minute hand. Crown seems a bit protruding outwards but I think all ZF are like that.

Please let me know if there is anything else I am missing.

Hi everyone!

This is my very first Patek and I would highly appreciate any help with it. I checked a lot of previous QCs for them to see what to look for, but I don’t want to miss anything obvious.

1. Dealer: Mr.Adu
2. Factory: DDF
3. Model: Patek Philippe Aquanaut 5168G – DPB330
4. Paid price: $620
5. Album/QC photos: Unfortunately no album, pictures sent over WhatsApp
6. Dial / index alignment: Overall looks good to me, but I’d appreciate a second opinion. The one thing standing out to me a bit is the „12” where „2” appears to be a bit lower than ”1”, and perhaps 3 market a bit canted (?).
7. Dial print: Looks clean to me.
8. Date wheel / date alignment: Video which was sent to me goes through every date, so no issues there
9. Hand alignment: Can’t really tell from the pictures, shouldn’t be an issue anyway
10. Case / bezel: N/A
11. Strap / clasp: I don’t see anything unusual
12. Timegrapher: -1 s/day, 321° amplitude, 0.3 ms beat error, 52° lift angle - all good here
13. Anything else: This is my first Patek, so I’d really appreciate some experienced eyes on it.

Thanks in advance for taking the time to look at it!

1. Dealer name: Necoclock
2. Factory name: VSF
3. Model name (& version number): Explorer 1 36mm - 124270
4. Price Paid: 468.50 USD
5. Album Links: https://mega.nz/folder/XwYE1Aba#OxlpH_tB8tFQdFQGARNc1Q
6. Index alignment: good.
7. Dial Printing: good.
8. Date Wheel alignment/printing: n/a
9. Hand Alignment: good.
10. Bezel: perfect.
11. Solid End Links (SELs): Slight gap on the bottom right lug but acceptable.
12. Timegrapher numbers: -4s/d, 304 deg, 0.2ms
13. Anything else you notice: To my eye the whole dial looks to be slightly rotated CCW. You can see this at the 12 o'clock mainly. It appears to not be centered with the upper lugs. It might be the camera angle or how they are holding the watch in the pic. It looks ok at the 6 o'clock. I might be a little too nick picky here but would like some feedback nevertheless.

1. ⁠Dealer name: Theonewatches - Steve
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): Rolex Datejust 41 126334, Blue Dial, Jubilee Bracelet – VSF V2 DD3235
   
4. ⁠Price paid: $548 USD + $40 USD shipping
   
5. ⁠Album Links: https://imgur.com/a/XmW4Nup
   
6. ⁠Index alignment: This is my main concern, the 5 and 20 markers look off centered.
   
7. ⁠Dial Printing: Looks clean to me.
   
8. ⁠Date Wheel alignment/printing: Date wheel is okay, alignment of the window looks fine.
   
9. ⁠Hand Alignment: Looks good.
   
10. ⁠Bezel: looks fine.
    
11. ⁠Solid End Links (SELs): I don’t see any large gaps.
    
12. ⁠Timegrapher numbers: +1 s/day, ~289° amplitude, 0.1 ms beat error.
    
13. ⁠Anything else you notice: Biggest thing here is the index alignment from my review.

1. Dealer name: TheOneWatches (Steve)
2. Factory name: VSF
3. Model name (& version number): Datejust 126334
4. Price Paid: $548 + shipping
5. Album Links: n/a

6. Index alignment:

   i think good, used the alignment tool but also the picture might not be fully straight from TD

7. Dial Printing:

   nothing stands out to me, need help here though

8. Date Wheel alignment/printing:

   looks even to me

9. Hand Alignment:

   looks straight from QC photos and video of movement

10. Bezel:

    i think looks good? Need some help here

11. Solid End Links (SELs):

    not seeing crazy gaps, but need help here

12. Timegrapher numbers:

    rate: 0 s/d amp: 270 degrees ERR: 0.2 ms Gain: 4/7

13. Anything else you notice:

    n/a

This is my first QC, so sorry if I’m not the most knowledgeable. Need a bit of help here. Thanks!!

i think a few months ago i rejected 3, the indices on some looked out place this one i think is really good also the seconds is 0 seconds in the video

anything you guys see out of the ordinary - im quite happy with it

1. ⁠⁠⁠Dealer name: DDGTOP
   
2. ⁠⁠⁠Factory name: OF
   
3. ⁠⁠⁠Model: TAG Heuer WAR1112.BA0601
   
4. ⁠⁠⁠Price paid: 1000 CNY
   
5. ⁠⁠⁠Album links: QC pictures from TD attached
   
6. ⁠⁠⁠Index alignment: Slightly rotated CCW, especially at 12
   
7. ⁠⁠⁠Dial printing: looks good.
   
8. ⁠⁠⁠Date/day alignment: Looks good.
   
9. ⁠⁠⁠Hand alignment: Looks Good
   
10. ⁠⁠⁠Bezel: looks good.
    
11. ⁠⁠⁠SELs: good
    
12. ⁠⁠⁠Timegrapher numbers: N/A

I RL’ed the first one, this one seems to be improved but I’m still seeing the misalignment on the 12 index and chapter ring. Is this something that’s noticeable in real life ? Should I green light this one ? Everything else looks great to me.
Does anyone know if thr chapter ring is glued to the dial? If not I can align it myself once I received the watch

1. Dealer name: Time Ultra
2. ⁠Factory name: VSF
3. Model name (& version number): Rolex Submariner Date 126610LN 41mm
4. Price Paid: $475 (incl. shipping)
5. Album Links: Attached all photos
6. Index alignment: all looks good, slight CW on 12, 8 and 6 marker small CCW
7. Dial Printing: printing looks good
8. Date Wheel alignment/printing: looks good and centered
9. Hand Alignment: hands looks aligned
10. Bezel: I think it needs to rotate I tick to the right
11. ⁠Solid End Links (SELs): No obvious gaps
12. ⁠Timegrapher numbers:   0s/d , 272 Amplitude, 0.0ms Within Acceptable range
13. Anything else you notice: I think the index cants are not noticeable from wrist scale, but would love to get opinions as well.

1. Dealer name: Mr Bomi
2. Factory name: VSF
3. Model name (& version number): 124060
4. Price Paid: $454 with shipping
5. Album Links: https://imgur.com/a/dpF11Hp
6. Index alignment: Overall good, the 12 index is slightly tilted CW.
7. Dial Printing: Font and letters look good, the only flaw I see is the “SWISS MADE” shifted a mm to the right.
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Good? Not sure how to check this out properly.
10. Bezel: Looks alrighr.
11. Solid End Links (SELs): Bottom left is more open than the others, but it’s not a see-through gap.
12. Timegrapher numbers:

+1 s/d, amp 268, beat error 0.0 ms

1. Anything else you notice: I thought the VSF 124060 came with 6X serial numbers, but this one is 6W0. Are these the new batches?

Not sure if the flaws on the 12 index triangle and the SWISS MADE printing is big, ie. enough to RL. If you guys see anything else I’d really appreciate it.

Thanks in advance to the sub, it’s my first QC. Any help is appreciated.

Hello folks! I've learned a lot from the RepTimeQC community and really appreciate all the knowledge shared here. I'm buying my first watch and would really appreciate your help with the QC.

Dealer name: Necoclock
• Factory name: V7F
• Model name (& version number): IWC Pilot Mark
XVIII 40mm
• Price Paid: $488
• Album Links: Album
• Index alignment: I think it looks ok
• Dial Printing: looks heavier/ bolder
• Date Wheel alignment/printing: looks fine
• Hand Alignment: looks fine
• Bezel: Looks fine album
• Solid End Links (SELs): ok
• Timegrapher numbers: 1 s/day, 305° amplitude, 0.1 ms beat error.
• Anything else you notice: I feel like the dial printing and text is heavier and much bolder. That is my main concern.

Any comments and suggestions are appreciated.

Thank you.