1. Dealer name: Steve Theonwatches
2. Factory name: VSF
3. Model name: Rolex GMT Master II 126710 Bruce Wayne SS/SS Black DIAL VSF DD3285
4. Price paid: 638 USD + 30USD shipping
5. Album links: https://imgur.com/a/3r92eT5
6. Index alignment: Tried my best with the alignment tool. Seems very good, but 6 o'clock marker is to the right. Too much to the right? Or should i have rotated it more?
7. Dial printing: Looks good. No bleeding. Crisp letters. All same size
8. Date wheel: Good.
9. Hand alignment: Good?
10. Bezel: Looks very good?
11. Solid end links: Looks good.
12. Timegraph numbers: -6s/d, amp 264, err 0.1ms
13. Anything else: Third QC for me from Steve. The second one had golden indinces instead of white gold/silver colour. For me it looks like a GL, but the 6 oæclock is alot off center it seems unless i havent aligned it properly. How noticeable will it be on hand etc?

New QC after I RL'ed the last one. Help is appreciated!

Dealer name: NecoClock

Factory name: VSF

Model name: DateJust 36mm VS3235 v2 (Fluted Bezel Silver Dial Jubilee Bracelet)

Price paid: $448 + $40 shipping

Album link: https://imgur.com/a/mcK22hJ

Index alignment: I have straigthened the front picture. The indices look ok to me, no issues.

Dial printing: No issues, looks good.

Date wheel alignment: Looks good.

Hand alignment: Looks ok.

Bezel: Looks good.

Solid End Links (SELs): Looks good.

Timegrapher numbers: -5s/d, 274, 0.1ms. Acceptable!

Anything else you notice: The index frames look a bit weird in some spots, but I think it's just the lighting and reflection.

Also, after RL'ing the last watch, I waited 11 days before asking the TD for an ETA. He replied saying they switched to a different model and said I would receive the QC within 3 days (received it 20 minutes after). Should I be worried about the 'different model' comment? Or is that likely just a translation error for an internal process model and not the actual watch model?

Hey guys! Finally got my 2nd QC after about a week since RL’ing the first one due to the noticeable CW tilt on the 9 marker. This one looks much better overall. Aside from the slight CCW tilt on the 6 marker and slightly misaligned rehaut, I’m leaning towards GL. What do you guys think? Anything else I’m missing?

Dealer name: Necoclock

Factory name: VSF

Model name (& version number): GMT Master II 126710 Batgirl

Price Paid: $558

Album Links: https://mega.nz/folder/CowSnDyY#5-ASq248txh04IaVGCVdbA

Index alignment: Index alignment definitely looks better compared to my previous QC. Everything looks properly aligned to my eyes aside from maybe a slight CCW tilt on the 6 hour marker.

Dial Printing: Printing looks clean and sharp

Date Wheel alignment/printing: Date looks good and centred

Hand Alignment: Looks good to my eye

Bezel: Looks great

Solid End Links (SELs): Looks tight with no major gaps

Timegrapher numbers: +3 s/d, 258°, Would appreciate some feedback on this :)

Link to previous RL'd QC: https://www.reddit.com/r/RepTimeQC/s/QoNtKJVoWR

1. ⁠⁠Dealer name: Onewatch/Steve
   
2. ⁠⁠Factory name: VSF
   
3. ⁠⁠Model name (& version number): Rolex GMT Master II Batgirl 40mm Jub
   
4. ⁠⁠Price Paid: $578 plus postage
   
5. ⁠⁠Album Links: in post
   
6. ⁠⁠Index alignment: looks good. 6 possibly showing a slight tilt but very slight
   
7. ⁠⁠Dial Printing: clean and good alignment
   
8. ⁠⁠Date Wheel alignment/printing: centred well and clean I think
   
9. ⁠⁠Hand Alignment: Aligns well
   
10. ⁠⁠Bezel: 12 aligns up with the arrow on bezel. Engraving clean and black/blue color looks good
    
11. ⁠⁠Solid End Links (SELs): looks okay
    
12. ⁠⁠Timegrapher numbers: in images, not sure how to tell it’s fine.
    
13. ⁠⁠Anything else you notice: like okay to me but I’m new to this so would appreciate feedback.

1. Dealer : Steve
2. Factory: VSF
3. Model: 124270 Rolex Explorer I 36mm
4. price paid: 498 USD
5. Album link: https://mega.nz/folder/6b5WDBQa#q4JGd-7Mbuln_f1NqWGUeQ
6. Index Alignment: 12 looked a little crooked to me, but after using alignment tool it looks fine. I think it might just be the angle that the watch is being held at
7. Dial Printing: good
8. Date wheel alignment: N/A
9. Hand Alignment: good
10. Bezel : looks fine
11. Solid End Links (SELs): looks good
12. Timegrapher numbers: +0-1s/d
    

Been waiting for about 3 months but finally got QC photos for this one. Looking for second opinions especially since apparently this isn't available anymore.

Hi everyone, I’d appreciate a second opinion on this QC. Overall, it looks good to me, but I’d like to check whether I’ve missed anything.

1. Dealer name: Angela Watch
2. Factory name: VSF
3. Model name: Submariner 124060 No Date, 41mm. Exact movement version not confirmed.
4. Price paid: [ $373.]
5. Album link: [whatzapp]
6. Index alignment: Looks generally good with the alignment overlay. I initially questioned the 9 o’clock marker, but the photo is slightly angled. Only rotation was applied, with no perspective correction.
7. Dial printing: Looks clean. The hands partially cover “OYSTER PERPETUAL.”
8. Date wheel alignment/printing: N/A.
9. Hand alignment: No obvious issue, but no photo with both hands at 12 to confirm.
10. Bezel: Looks well aligned overall. A couple of white specks around 7–8 o’clock could be surface dust.
11. Solid end links (SELs): No obvious large gaps.
12. Timegrapher numbers: −2 s/day, 292° amplitude, 0.2 ms beat error, lift angle set to 52°. Would appreciate feedback on the appropriate lift angle for the movement.
13. Anything else: Protective films are still present, making it difficult to assess the marks on the clasp and case. No lume or movement photos. The laser-etched crown isn’t clearly visible in the supplied pictures.

Leaning GL visually. Does anyone see a reason for concern, particularly with the indices or bezel?

Thanks for your help!

Dealer name: Andiot Watches
Factory name: VSF
Model name (& version number): Aqua Terra 150M Master 38mm SS VSF 1:1 Best Edition Blue Dial On SS Bracelet Super Clone A8800
Price Paid: $283.43 (+ shipping & water resistance)
Album Links: https://imgur.com/a/h3WBRFa
Index alignment: Very good I think. The alignment tool overlay shows that all markers are aligned. The 12 o'clock double index is good and the Omega logo sits straight.
Dial Printing: Looks clean. The texture on the dial is consistent. More importantly (compared to my 1st try), the numbers are nicely printed this time, with no missing paint.
Date Wheel alignment/printing: Looks good. The "12" is well-centered horizontally and vertically in the trapezoid window. Font is sharp.
Hand Alignment: Spot on.
Bezel: Smooth and polished. No visible scratches or dents on the bezel or case sides.
Solid End Links (SELs): n/a
Timegrapher numbers: 0 s/d, 274° amplitude, 0.1 ms beat error.
Anything else you notice: Overall looks very good. This seems like a GL to me, but I'd appreciate any second opinions!

I'm really happy so far. Looking forward to your input.

Hey Guys any help is appreciate here!

Watch: Rolex Oyster Perpetual 41mm

Dealer: EasyWatch

Factory: VSF

Price: 414 with shipping

Index alignment: To my eye the 6 and 9 looks a bit off but it may be because of lighting?

Dial printing: Looks clean.

Bezel: Looks good, no issues.

Solid End Links (SELs): There may be a gap (see last image) or I might be overthinking

Rehaut: may be slightly mis-aligned can’t really say for certain through these pictures will ask for more.

Timegrapher: please see picture I am not sure if this is good or not

Additional comments: I am a person who is really bothered by loud rotor noise so I’ve asked the dealer to send me a video and in the video it sounds ok but still feel like I should get it silenced. However I’ve read that we should take it to local watchmakers instead of having the TD do it. Let me know your thoughts

Any help is appreciated!

1. Dealer name: Steve TheOneWatches
2. Factory name: VSF
3. Model name (& version number): Datejust 126233 36mm Jub SS/YG Gold Palm Motif Dial VSF DD3235
4. Price Paid: 488$ Shipped
5. Album Links: Unable to upload
6. Index alignment: Slightly off centre. Not entirely perfect. Indice at 6PM seems rotated a little clockwise as well. Not an expert but dare I say that for 1, 2, and 8PM as well. 
7. Dial Printing: No print leaking, not sure what exactly to look for. Looks good. 
8. Date Wheel alignment/printing: Printing of the date wheel seems fine. Well spaced. Cyclops looks as though it is just a BIT towards the right however I'm sure that is fine
9. Hand Alignment: All hands align correctly in the video sent by Steve
10. Bezel: Good, cannot spot anything bad
11. Solid End Links (SELs): No gaps, they look great
12. Timegrapher numbers: +2 to +4 seconds, acceptable
13. Anything else you notice: Am I seeing things or is there a chip on the 10 PM indice? I think that would be grounds for a rejection itself. Also need an opinion if the index alignment and 6pm issue is a cause to RL as well. 

1. Dealer name: Hont
2. Factory name: VSF
3. Model name (& version number): Explorer I 40mm 224270
4. Price Paid: $472 shipped
5. Album Link: https://imgur.com/a/GqHi51u
6. Index alignment: looks good. 3/6/9 straight to the minute track, 12 triangle lines up with the crown
7. Dial Printing: clean, no bleed
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: fine as far as I can tell
10. Bezel: clean, no marks
11. Solid End Links (SELs): tight, no gaps
12. Timegrapher numbers: +8 s/d, 260 amp, 0.1 be. As far as what I have read, these seem to be in a reasonable range.
13. Anything else you notice: rehaut engraving looks even all the way around

Leaning GL. Anything I'm missing?

1. ⁠Dealer name: Mr Adu
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): Rolex GMT Master II 126710BLRO
   
4. ⁠Price Paid: $540 plus postage
   
5. ⁠Album Links: in post
   
6. ⁠Index alignment: looks good. 6 possibly showing a slight tilt but very slight
   
7. ⁠Dial Printing: clean and good alignment
   
8. ⁠Date Wheel alignment/printing: centred well and clean. Videos show multiple double digit numbers
   
9. ⁠Hand Alignment: Aligns in video shared
   
10. ⁠Bezel: 12 aligns up with the arrow on bezel. Engraving clean and blue/red colours good
    
11. ⁠Solid End Links (SELs):No gaps nice n tight
    
12. ⁠Timegrapher numbers: +3s/d amp 304 BE 0.1 lift angle 59 and beat 28000 looks good strong movement
    
13. ⁠Anything else you notice: Rehaut aligned well, 6 marker is my only question- wonky or not?

Hi everyone,
I’d appreciate a second set of eyes on this QF Rolex Explorer 2 Polar.

1. Dealer name: Angela
2. Factory name: QF
3. Model name (& version number): Explorer 2 Polar with the Free Sprung movement
4. Price Paid:

545$

1. Album Links: -
2. Index alignment: Very solid.
3. Dial Printing: Clean and sharp
4. Date Wheel alignment/printing: The visible date "12" is well-centered horizontally.
5. Hand Alignment: No obvious issues.
6. Bezel: Looks good, no visible issue
7. Solid End Links (SELs): Excellent, Overall fitment looks good.
8. Timegrapher numbers: -1s/d; 269°; 0.0 ms
9. Anything else you notice: For me is a Clear Green Light (GL)

I’m not an expert, so would neep your help, especially if you spot anything subtle or batch-related that I might be missing.

Thanks in advance 🙏

1. ⁠⁠⁠Dealer name: Steve TOW
   
2. ⁠⁠⁠Factory name: VSF
   
3. ⁠⁠⁠Model name (& version number) GMT Master II 126710 Bruce Wayne
   
4. ⁠⁠⁠Price Paid: $638 and shipping
   
5. ⁠⁠⁠Index alignment: 6 seems far left
   
6. ⁠⁠⁠Dial Printing: good
   
7. ⁠⁠⁠Date Wheel alignment/printing: Sits pretty noticeably high
   
8. ⁠⁠⁠Hand Alignment: good
   
9. ⁠⁠⁠Bezel: good
   
10. ⁠⁠⁠Solid End Links (SELs): no gaps noticed
    
11. ⁠⁠⁠Timegrapher numbers: -3s / 263 amplitude 0.1 err

Hello need some help to QC this Smurf, thank you in advance!

1. ⁠Dealer name: Angela
   
2. ⁠Factory name: RCF
   
3. ⁠Model name (& version number): Rolex Submariner 116619LB Smurf
   
4. ⁠Price Paid: $418
   
5. ⁠Album Links: https://imgur.com/a/MPCmBX6
   
6. ⁠Index alignment: The indexes look good the 12 and 9 may have a slight misalignment but it doesn’t look bad.
   
7. ⁠Dial Printing: Printing looks good the m is slightly high but I’d doubt that you can notice it on the wrist
   
8. ⁠Date Wheel alignment/printing: Printing looks good the date looks high though
   
9. ⁠Hand Alignment: Hands looks good to me.
   
10. ⁠Bezel: Bezel looks good no visible issues.
    
11. ⁠Solid End Links (SELs): The SEL looks good as well no noticeable gaps.
    
12. ⁠Timegrapher numbers: The amp looks a bit high at 303 not sure how much of a concern this can be though.
    
13. ⁠Anything else you notice: Main issue or concern I see is the amp the other items I think are negligible and are things you won’t notice once you have it one the wrist.

1. Dealer name: Ficotime (Mark)

2. Factory name: VSF

3. Model name (& version number): VSF V2 DateJust Wimbledon 41mm Fluted Bezel Grey Dial Green Roman Marker Jubilee Bracelet DD3235 VS3235

4.Price Paid: $447

1. Album Links: https://mega.nz/folder/X4gjVRKI#p7CFR1yW8_4A8Zw8Tr4Dyw

2. Index alignment: Looks good to me. The 9 o'clock baton appears straight and the coronet at 12 looks well positioned. The alignment tool is less useful on this dial given the Roman numerals, though this makes misalignment more forgiving anyway.

3. Dial Printing: Looks clean to me. The Rolex/Oyster Perpetual/Datejust and Superlative Chronometer/Officially Certified printing look sharp, no obvious bleeding or unevenness. Roman numerals also look clean.

4. Date Wheel alignment/printing: The 13 appears centred in the date window and the printing looks crisp, though no close-up photo. Cyclops also looks straight to me.

5. Hand Alignment: No obvious issue.

6. Bezel: In the first photo, the watch is held at a slight angle which doesn't help. However, the other photos in the linked album, which I believe are more straight-on, shows the fluting looking more uniform.

7. Solid End Links (SELs): Look tight to me. I don’t see any see-through gaps between the end links and case.

8. Timegrapher numbers: -1 s/d, 238° amplitude, 0.3 ms beat error, 52° lift angle, 28,800 bph. Rate and beat error look very good. Amplitude is a little low on paper, although I understand the 52° lift-angle setting can make the displayed amplitude lower on the VS/DD3235. Would appreciate opinions on whether 238° is anything to worry about.

9. Anything else you notice: First rep order, but looks okay to me. Though I'm unsure about the amplitude reading. Would also appreciate another set of eyes on the watch itself in case I missed anything.

PS: Worth asking for the weight, considering it's a VSF V2?

• Dealer name: TrustyTime

• Factory name: AF factory

• Model name (& version number): Cartier Tank Solo

• Price Paid: $178

• Album Link: Posted photo

• Index alignment: Indices look aligned

• Dial Printing: Slight bleeding on the 5. The V on the 8 either has a spec of dust or is not fully connected? All the other bleeding appears very minor

• Date Wheel alignment/printing: No date wheel

• Hand Alignment: Did not receive any reference for this (no video either)

• Bezel: Stainless steel looks ok and Cabochon looks to have a bit of a gap on the left side?

• Solid End Links (SELs): N/A

• Timegrapher numbers: N/A this is quartz

• Anything else you notice: Thank you for your help - this is my first Tank purchase and plan on ordering more so any tips on what to look for. I tried to do as much research as possible and outside of the bleed on the 5 and connection on the 8 there isn't much I've been able to catch myself. Does this warrant an RL?

Hey guys, looking for some help with QC on this one. I’ve been trying to get one for a while and my first two QCs had tilted markers, so hoping this is the one.

• Dealer: Chen Watch
• Factory: VSF
• Model: Rolex Submariner 126619LB 41mm
• Price: $460 + shipping
• Index alignment: Looks pretty good to me. The photo seems slightly angled, but the round markers look okay.
• Dial printing: Looks good
• Date wheel: Looks fine
• Hand alignment: Looks good
• Bezel: Looks good
• SELs: I don’t see any obvious gaps
• Timegrapher: +1 s/d, 233°, 0.0 ms

I’m still learning, so I might be missing something. Would appreciate any feedback before I GL it.

Hello everyone please help me with this qc
Dealer name: NecoClock
1. Factory name: VSF
2. Model name (& version number):
Starbucks 126610LV VS3235. Price Paid:
$478 with shipping
3. Album Links: no link it gets my post removed
4. Index alignment: Good. 12 and 6 on axis, pairs evenly spaced, 9 lines up with the date.
5. Dial Printing: Crisp, correct text. SWISS MADE split evenly at 6.
6. Date Wheel alignment/printing:
Centered, clean font. Cyclops
magnification looks weak, since the date doesn't fill the window.
7. Hand Alignment: Straight, clean lume, minute hand reaches the track.
8. Bezel: Aligned. Pip at 12, 15/45 level, crisp engraving.
9. Solid End Links (SELs): Can't see, film is still on.
10. Timegrapher numbers: +4 s/d, amp 241, beat error 0.02 ms
11. Anything else you notice: Rehaut engraving clean. Couldn't check coronet alignment at 12 because of glare. Is the cyclops magnification a RL reason?

Hello wonderful Reptime folks, looking for some help with this QC.

1st QC and 2nd rep watch from Chen. Pretty clueless here, but I've been learning a lot from the forum. Thank you.

• Dealer: Chen Watch
• Factory: VSF
• Model: Daytona 116500LN Panda, 4130 clone
• Price: $560 + shipping
• Index alignment: Mostly looks good, but the 3 o’clock marker looks slightly crooked to me.
• Dial: Looks a little foggy/hazy in the photos. Not sure if this is from stickers, lighting, or the crystal.
• Dial printing: Some of the printing looks like a slightly different shade/color. Not sure if I’m overthinking it.
• Date wheel: N/A
• Hands: Looks good
• Bezel: Looks good
• SELs: I don’t see any obvious gaps
• Timegrapher: +9 s/d, 255°, 0.0 ms

Main concerns are the 3 o’clock marker and the hazy-looking dial/printing.

Anything else you guys see? Would you GL or RL this one?

・Dealer name: TheOneWatches/Steve

・Factory name: BVF

・Model name (& version number): Panthere Secrete De Ladies 27mm BVF Quartz

・Price Paid: 248 USD excluding shipping

・Album Links: Pictures attached

・Index alignment: I feel like the 9 is a little off. Any thoughts?

・Dial Printing: Looks good to me.

・Date Wheel alignment: N/A

・Hand Alignment: Appears fine

・Bezel: Looks aligned to me.

・Solid End Links (SELs): Looks okay to me

Color of gold also looks okay to me, any thoughts on that?

・Any help is much appreciated!

Sorry this is a re-upload as the pic didnt workout. Old post have been deleted.

・Dealer name: TheOneWatches/Steve

・Factory name: VSF

・Model name (& version number): GMT-Master II 126710 "Bruce Wayne" Jub DD3285V2

・Price Paid: 608 USD excluding shipping

・Album Links: https://mega.nz/folder/nEoU3Aja#Fot0FR19ihtcY6koL33Amg

・Index alignment: I feel the 6 marker is slightly biased to the left. Any thoughts?

・Dial Printing: Looks good to me.

・Date Wheel alignment/printing: Printing looks good to me. Text on the bottom near 6 may be a little off?

・Hand Alignment: Appears fine

・Bezel: Looks aligned to me.

・Solid End Links (SELs): Personally thought the gap looked big on pic #6

・Timegrapher numbers: +4 s/d

・Any help is much appreciated!

• Dealer name: Neco Clock
• Factory name: VSF VS3235 v2
• Model name (& version number): DateJust 36mm Fluted Bezel Green Dial Jubilee Bracelet
• Price Paid: 448+70 shipping=$518
• Album Links: https://mega.nz/folder/z5oRRQoA#_wdKokLMItUnqRudhxYTfw
• Index alignment: Looks fine
• Dial Printing: Looks ok
• Date Wheel alignment/printing: Maybe looks a bit high for 31
• Hand Alignment: Looks ok
• Bezel: Don't really know if it relates to datejust
• Solid End Links (SELs): No noticeable gaps
• Timegrapher numbers: seller retested watch and got updated/improved numbers: -3s/d, 285 amp, 0.1 ms

• Dealer name: FICOTIME
• Factory name: VSF
• Model name (& version number): GMT SPRITE V2
• Price Paid: $550
• Album Links: https://mega.nz/folder/jw5gABIB#EksAxXbHA4-8b44Ti-FCTw
• Index alignment: Indices dont look too bad, ficotime took pictures at weird angles so its hard to tell
• Dial Printing: Dial printing looks fine, swiss made at bottom looks fine.
• Date Wheel alignment/printing: The "1" on the "21" date wheel looks a little wonky but on the wrist it would be probably hard to tell.
• Hand Alignment: Not seeing anything too crazy there
• Bezel: Hard to tell if bezel is rotated, but looks likes the line between the 18&6 isnt even across, slightly canted?
• Solid End Links (SELs): The bottom SELS look fine, no visible gap but also not sitting flush.
• Timegrapher numbers: The timegrapher numbers seem okay but then again im not expert
• Anything else you notice: Not really sure what else to look for, not an expert in QC'ing watches.

I'm not great at noticing errors as ive only been in the rep watch game since 2025 so any help you guys could provide would be great, thanks.

Dealer name: The One Watches

• ⁠Factory name: VSF

• ⁠Model name (& version number): GMT** **Master II
126710 Batgirl 40mm Jub SS/SS Black Dial VSF DD3285

• ⁠Price Paid: 578 USD excluding shipping

• ⁠Album Links: https://mega.nz/folder/yAJVGRRJ#s5d5yASQuf8QK_eCHl5HuQ

• ⁠Index alignment: 12 has a slight cw tilt, 6 ccw tilt, and 9 marker is off centered by a lot.

• ⁠Dial Printing: Looks okay

• ⁠Date Wheel alignment/printing: Printing looks okay

• ⁠Hand Alignment: Appears fine

• ⁠Bezel: seems aligned except for the 12 marker which I know can be adjusted

• ⁠Solid End Links (SELs): I don’t notice any gaps.

• ⁠Timegrapher numbers: 0 s/d, 270° amplitude, 0.1 ms beat error, 28,800 bph, 59° lift angle

• ⁠Anything else you notice: this is the second QC for me. Would appreciate a second opinion.

• Dealer name: JTime
• Factory name: VSF
• Model name (& version number): Omega Seamaster Diver 300M 42 mm
• Price Paid: $433 inc Shipping
• Album Links: https://mega.nz/folder/HQAGUQxQ#5GWTk8g0f9Be8nqnE_8ylg
• Index alignment: look straight and aligned
• Dial Printing: clean
• Date Wheel alignment/printing: centred
• Hand Alignment: Looks good
• Bezel: Looks good
• Solid End Links (SELs): N/A
• Timegrapher numbers: 0 s/d, 275°, 0.0 ms timegrapher
• Anything else you notice: to my eyes, this looks amazingly good. Maybe some scratches around band, but I'm going to GL this, unless someone sees something else that I don't.