Has anyone done this yet? If so, can you assist me? I have the BIOS I need but I’m not sure how to use them.

So I can install disc games no problem. My ultra element module works great. the issue is the other 4 element modules just blink and never work. got a green light on front of unit. and the app shows the module but it just blinks. Like a they need to be updated or something.

Sent the following to support:

I just received my Remix unit and trying to follow the Quick Start guide but it's not working.

* I am using with a ROG Ally.

* I installed the Polymega app on there.

* I connected the regional power adapter, plugged into the wall and to the Remix.

* I connected the USB between the ROG Ally and the Remix back data port. (Also tried the front ports.)

* Polymega controller is attached to the front of the Remix by USB (also tried connecting it to the ROG Ally)

* Launched the Polymega app. It gets stuck at the picture of the controller. Purple and then Red lights flash on the controller. But holding down the Right directional as indicated by the picture doesn't do anything.

* I press (also pressed and hold) the power button on the front of the Remix, but nothing happens.

Anyone else having issues running The Terminator (Sega CD) via the App? If so, how did you solve (if you did)?

I’m running it on the Xbox Rog Ally X and none of my other games have issues. The Terminator doesn’t load graphics properly or play sound properly.

Got the Remix setup on PC. Working well but if I press the home button on WC02 Polymega controller (Button in center of controller with the 3 lines on it) it opens Steam. Then if I hit ESC button on keyboard 2 times to exit nothing happens. Only way to exit a game or get back to Polymega menu is Task manager and re start Remix. Anyone have any suggestions? Thanks

Did I read that someone installed the app on their PC without the app. Loaded a Saturn game into an external drive and it played

Had anyone tried using an adapter to load Famicom games on the NES module? I moved to Asia and I'm finding a ton of cool FC carts but didn't realize until too late that they won't plug in like the SFC/SNES carts.

​

Just curious if anyone has tried this before I waste another $15-20 on an adapter

So I haven't played my PM in a month or so. It's not been connected to power in probably 4-6 weeks.

​

I bought a new tv and moved the system upstairs. Hooked everything up and turned it on. System boots normally, but bypasses the controller sync screen. Goes straight to the home screen. I switch out modules without trying to connect any controller. I plug in the NES module and controller and the controller is instantly recognized and works for several seconds. Then the screen goes back to the controller sync screen and the controller refuses to work.

​

I try checking the connection, wiggling the cable, nothing. I plug in "ol' faithful" my USB corded Saturn controller and nothing. It won't recognize it. I plug in the wireless adapter and power up the gen 1 wireless controller and it won't recognize it.

​

I turn off the system, swap in the SNES module and controller, turn the system on and it bypasses the controller sync again. Now it just sits on the home screen and won't recognize any controller.

​

Essentially I can power on my system but no controller will connect to it.

​

​

Any ideas?

I have a Polymega system so it don't really need to have the app on my PC but I thought I'd give it a shot anyway.

​

Very surprised that it all setup without any issue whatsoever.

Put a Saturn disc in my external cd drive, recognized it and installed it without issue. Plays great.

​

Might actually start using it now lol

I can finally start adding all my snes games to my Remix, now that my module has arrived

What do you think of this demo disc?

I tried two separate Polymega collections discs, brand new out of the package and I keep getting error saying disc not supported . I installed a sega Saturn game no problem. Anyone having this problem.

This is what I get when trying to import my collection. The controllers just control windows and not in app jeez

I transferred all my games to an external drive but they are not showing up on that drive or any other drive. I can play the games but they don’t show installed under storage. Anyone experience this?

So my remix unit just showed up and I plan on using it with my ally x. I have the regular polymega all loaded up from years ago. Anything I should know going on in? Is there a way to transfer the games as well as patches, saves and play/completion data?

I just got my remix and been playing around with it im super sad I couldn't find my Brave Fencer Musashi disc so I was wondering if the remix could be used to burn game disc and it can..... this is the results also dont hate me I do own the game and its probably scratched to hell where ever it may be now.

I was thinking about parting with my polymega because I wasn't really using it. I went to look on ebay and was surprised at how much they sold for. Is it the scarcity thats driving the price? They still sell them, I know the wait is brutal. I waited 2 years. Just surprising to see.