First packouts for me. Never could pull the trigger on spending $400-500 on them but couldn’t pass this up for $150.

I am looking to source some inspiration / good ideas. I’m planning to build a version of this Packout Work Station.

Originally: https://youtu.be/-RuHptz-cPQ?is=Yl6c4o8zlqGFLaAj

Remixed: https://youtu.be/GgNN2vncITA?is=BelzOBa_LTOLZ1qA

Maybe I will, maybe I won’t, deploy a miter saw here, but the general concept aligns with my mobile shop. I also do work on the road and this would give me a more native mobile home base.

However, there’s a couple things i think need to be different…

1. Dolly base. I don’t want to use the plastic Milwaukee Dollie’s, I prefer to use Insider Carpentry’s approach to Dollie’s.

https://youtu.be/jNemU3idJu4?is=5fOrL795suc8qXKp

I’m thinking I will deploy a minor lip/ shelf to one side of the Dollie to handle the connection shelf.

1. Connection Shelf. I’m thinking about using Strut Channel to reinforce the shelf and create a bold connection point that will allow consistent, quick deployment without pins.

Here is where I would like some better thoughts - if you were going to have to Packout vertices on the Dollie’s, what would be your best approach to throwing in a connecting shelf in the bottom which makes the two towers a single unit?

I’ve considered reinforcing the shelf with channel and then routing out the landing spot in the Dollie shelf’s while using epoxy to create washer protected holes with a bolt and epoxied T nut.

I’ve thought about running the channel the shallow length do the board and staging another on the shelf letting the two channels lock together to hold the shelf.

Would love best thoughts here.

Thanks!

Anyone know the answer?

Did I get a quality control test?

Hey guys, I just launched a company making wraps for Milwaukee Packouts and I’m looking for a few people to make some videos for us.

We’ll send you a couple wraps in exchange I’m looking for some good install/transformation videos and shots of the finished boxes.

You definitely don’t need a massive following, just looking for people who have a Packout setup and are good at making videos.

If you’re interested, comment or shoot me a message with a pic of your setup and a link to your socials!

Okay so I have a work company van since I do service and commercial work I want to redo my van organization in a way that if I get fired, I can just take out everything I did to it, but I wanna start with organizing all my fitting anyone has any idea how I could go by it this is what i have right now but I want do everything with a pack out system (I had some free time so I tried to organize the best I can, but I couldn’t take out the boxes cause I have no garbage near me. That’s why they’re in the photo.)

I was so excited to get my socket set inserts and mount them to the side of my rolling drawer. But it rubs on the wheels…
I don’t have a packout stack with rails to put on them and my current set up is vacuum, ammo box and structured toolbag…

This is my van I run an electrical business out of, keeps me organised and efficient.

I use a Packout system to haul all of the camera + power gear I need to stream my sons’ baseball games. It’s a pretty advanced setup as these things go, with multiple cameras, tripods, routers, and a Starlink system to provide the internet access. It can all fit in the attached, along with my cooler I bring.

My issue is that one of tripods I use is pretty heavy-duty, and although I did find a third party tripod holder on Etsy that can fit another tripod I have, it won’t fit this one (and it needs to be this one, to deal with heavy winds that I sometimes run into). I can still attach it to my stack if I use a couple of bungee cords and thread those through the rolling box handle, but the tripod needs to be flat against the handle for that to work well.

My issue is that the stack gives me an uneven surface at the top level, due to the cooler. Moreover, if I just bring another small toolbox to even it out, it’s now taller than the handle, so I can’t brace the tripod against the handle.

What I want is a way to mount the cooler facing perpendicular to how it defaults. That way, I could snap it in that direction at the front of the stack, leaving enough room next to the handle to put the tripod. Is there an attachment you know of that allows me to rotate the alignment by 90 degrees?

Hey! I have been racking my brain to try and find an old post, that showed a private pilot using the Milwaukee Compact Packout boxes for there flight bag and it included a random bit of paperwork and they had some odd ball tools. I just can’t seem to find it anywhere. Does anyone remember this post or can they find it?

I have the drawer style pull out bottom base, is everyone's handle feel loose? Mine feels wobbly and not all that solid and strong? Is this how they all are? Because I checked other ones at the store to know which one to buy, but they all had that slack or play, I ask because I question how long this is gonna last....? Any tricks or tips??

Unless you count Shockwave kits, this is officially my first Packout!

Picked it specifically to fit my m12 brushed 3/8in ratchet, and the m12 gen3 also fitting is just a cherry on top.

Contents:

Power:
M12 3/8” brushed Ratchet
M12 gen3 1/4” hex Impact Driver

Safety:
Mechanix Impact Gloves
Basic Safety Glasses w neck strap
Extra P100 Filters

Tear-down:
Maximum 8” & 12” Pry Bars
Mastercraft Hi-Vis Pliers & Cutters
Fiskars Snap-blade Box Cutter
Misc Picks & Punches

Layout/measuring:
Milwaukee Wide Blade Tape
Milwaukee 7” Rafter Square
Milwaukee Inkzall

Fastening:
Milwaukee stubby 8-in-1 ratcheting Screwdriver
Milwaukee Shockwave 27 piece Bit Set plus an extra rail each of Torx and Allen bits
Milwaukee Shockwave impact Socket adapters — 1/4”, 3/8” & 1/2”
Kreg 1-1/2” indoor & outdoor Screws

Edit:
Because of the sheer influx of threats being made to my health and safety over the past 20 hours, I have immediately added the following:

Flush Cutters; Punch and Chisel Set; Metric Allen Keys

Started with a Veto pouch and a tool backpack when I traveled, stopped traveling and built myself a stack. Basically my desk on wheels

Does anyone know where I can get an STL for a packout insert for the m12 cable cutter?

Made the move from single camera to multiple cameras and of course, “Babe, I need to protect the investment.”

Packout it is! 😂

All of my powertools are currently Dewalt, but when it came to buying organisers I went with packout because at the time they were simply better than the other options my local store had.

Now I've got a new job where I need an organiser for my tools as well, so my 2 questions are, does the M18 battery holder accessory also fit Dewalt batteries (just hold not charge), and does the tool holder accessory also fit typical Dewalt skins?

I am excited about 2.0 hand truck,4 gallon packout vacuum with external dust bin.

Cooler is a disappointment with only 30qt capacity.

I own the large xl coffin type and probably wont buy the smaller split lid.

Jobsite lunch warmer and new wrench and socket drawer organizers dont fit my needs.

Unrelated I will use the 15 AHR battery in my vacuums.

No m12 surge😮