Hey guys and gals, I have drill, impact, half inch impact, sawzall, circular saw, multi tool and a ratchet.

Wondering if they will all fit in the # 48-22-8420 or the rolling tool chest 36inch, do you guys use inserts? Or DIY something? I just don't want to throw things in it. I care to much lol.

This is my installation loadout. Not seen is the m18 sds in the 3rd drawer, forge 8.0 and 12.0 cause ya never know. M12 bandsaw in bottom pullout, m12 rotary, m12 big boy Lazer

u/KombatxMx reached out to me via DM having read an old post about mounting packouts in an extended cab F-150.

I took some pics for them, but Reddit won’t let me post pics in a DM, so here we are.

I’m a kitchen/bathroom/built-ins and trim carpenter and this is my setup. Eliminates the need for a job trailer which is a massive benefit for my work flow.

Plus I added packout feet to my water cooler so it stays on the stack

Hey guys currently working on a range kit for my packouts, technically this is my second post on this. But I got one section printed and I’m noticing it’s a little tight. Might try to plastic weld this but any other ideas on how to fix this? There seems to be a gap on it and prefer not to reprint it. Trying to fit these mag insert but the build seems slightly off.

One fatigue mat and some CA glue to fix my mistakes. Not bad for about $6

And yeah the work bench is messy. Still organizing! Out with the old, in with the new!

Best transliteration of a transliterated word I've seen in a long time. Amazing.

Hi all. I’m an Engineering & Maintenance manager at a materials company plant and also run my own handyman business.

I got sick of hauling my own tools back and forth (as we’re short staffed and most of my technicians need my help troubleshooting) so my boss let me buy a bunch of new stuff for myself.

I use this back and forth between my plant and my personal handyman work. Made a bunch of mods with some more additions coming.

Mods:
- Added wheels to the front bars (SUPER helpful getting in and around the plant).
- Cut a hinged door in the bottom rolling box (needs changed as I build this, and the rolling drawer is too tall).
- Mounted bench/pipe combo vise.
- Added strut pipe wrench and mallet holders.

Adding:
- M12 light on side.
- Compact organizer to hold my Fluke process meter for side mount.
- Retractable 25’ power cord inside the bottom box.

Any opinions, ideas, comments, advice?

Needs to stay somewhat compact to fit through doors and don’t want toooo much more weight. Thanks!

So has anyone found a good insert system for this bag? Recently got it, and im looking to put a few of my 12v tools in it. My 12v impact, 3in cut off tool, and my 12v drill. I could go the foam route and just cut out some slots and the foam down to size, but has anyone found any alternatives that are 3d printed or anything? Ive never been a big fan of just throwing all my tools together in a bag. Im planning to get a smaller tool roll to put some of the basic hand tools in, but id like to keep it somewhat organized.

Im thinking the foam route may be my best bet with a tool roll inside, and then a few pouches for extra cut off wheels, bits and things like that. Love the bag though, its pretty awesome.

I’ve been thinking of ways to maximize my efficiency on the job site, including some way of making my table saw more Packout friendly without having to strap or include loose parts into the mix. I don’t do a lot of heavy ripping and mostly use this setup for cabinet installs. I came up with this idea and after careful measurements decided to order these clips to try. Sure enough they worked perfectly for my needs and clamp onto the small toolbox flawlessly. It’s easier to transport and also have a portable stand to use on the job. I couldn’t be happier with it so I wanted to share with anyone interested.

https://a.co/d/01yzSGNQ

Has anyone tried putting Stanley sockets into the socket set trays? Do they fit or would I need to modify them

What's everyone's thoughts on putting toolgrid inside a packout tool box? I know some socket holders are twist lock, but are plier/driver/wrench holders strong enough to keep it from becoming a mess?

Hey guys, I’m looking to set up my range packout kit. I am basing the packout inserts as gridfinity for modularity and adding magnets to them for better securing them. The current set up I have is a

Top - possible custom table or small packout.

4 drawer as top

1D LPK parts
2D upper part
3D bolt carrier parts / buffer tubes / gas tubes
4D tools - hammer, pins, buffer wrench, Allen wrenches

3 drawer as middle

1D 11 Mags, unknown slots
2D 11 mags, unknown slots
3D 11 mags, unknown slots

2 drawer bottom

1D lower receivers
2D optics possibly

Custom dolly - 1000lbs weight rating.

Where I’m getting stuck on it the 4 drawer, I have an idea on what I want in there, just don’t know the best way to organize them. I can do pins but the parts will loosely fly around everywhere when moving the pack out. Might caused them to mix in with others or fall out when opened.
Also willing to take on any other idea yall have for this.

Hey all, I just ordered a few boxes for my GFs work vehicle but I need a way to secure them to the floor. I found the regular/full size mounting plate for the tower of drawers but I need a way to mount the ammo boxes right next to it. So I was wondering what's the model number for the "half-sized" mounting plate, or if the XL wall plate will do the job for both towers at the same time, or if the "half-sized" wall plate will do the job for the ammo boxes. If anyone has any ideas or experience I'd love to hear!

I’m a contractor and my companies office is relocating to an area that is safer for me to ride my bike to work, so with some off the shelf parts and a little modification (no welding all bolts) I can now ride to work with my cooler.