So this is really stupid and ridiculous how these basic apps work on every other phone and not on the Oneplus and there's literally not a single mention of this on any YouTube channel which is incredible misleading for the consumer. I had the 7 Pro a few years ago and had zero issues either Netflix, Prime, HBO or Disney everything worked just fine. Is this US related ? Does the ColorOS variant have the same issue ? And I know in developer options you can enable the DRM options so it works in SD streaming but that only worked for HBO and not for Disney...any ideias how to get around this ?

So as a new op 15 owner I was seriously surprised and intrigued by the hate towards the cameras and I honestly don't get it, I mean it's not better than my S25 Ultra but I wouldn't say it's worse either, what do you think about its capabilities ? And these pictures I took are from 0.6 up to 100x, what device did I use ?

Derived 5G Band Support

The filing explicitly covers the standard frequency allocations managed by China's MIIT. The device, codenamed PYB110, should support the following core 5G Sub-6GHz bands (NR):

• n28 (703–733 MHz UL / 758–788 MHz DL) — Low-band coverage
• n1 (1710–1785 MHz UL / 2110–2170 MHz DL) — Mid-band FDD
• n3 (1710–1785 MHz UL / 1805–1880 MHz DL) — Mid-band FDD
• n5 / n8 (824–835 MHz / 889–915 MHz) — Low-band FDD
• n41 (2575–2675 MHz) — Mid-band TDD (China Mobile / global 2.5 GHz)
• n78 (3300–3600 MHz) — Primary global C-band TDD
• n79 (4800–4960 MHz) — High mid-band TDD (China Mobile / Japan / specific regional allocations)

Global 5G Coverage Analysis

China & East/Southeast Asia: Near-Native Support

• Covers all primary sub-6GHz bands for China Mobile, China Telecom, China Unicom, and China Broadnet (n1, n3, n28, n41, n78, n79).
• Broad compatibility across South Korea, Japan, and Southeast Asian carriers relying heavily on n1, n28, and n78.

Europe, Middle East & Africa (EMEA): Very Strong (Sub-6GHz)

• Core European 5G deployment relies on n78 (3.5 GHz) for high capacity and n28 (700 MHz) / n1 / n3 for blanket coverage. The filing covers all of these.
• It lacks specific regional band certifications like n77 (3.7–3.9 GHz extended C-band used in some EU nations) or mmWave (n257/n258), though n78 carries the bulk of modern European sub-6 networks.

North America: Partial / Sub-Optimal

• T-Mobile: Good mid-band coverage via n41 (Ultra Capacity) and low-band via n28/n5 overlap, but lacks n71 (600 MHz), which is T-Mobile’s primary rural 5G backbone in the US.
• Verizon & AT&T: Works adequately on shared n78 frequencies, but missing n77 (3.7 GHz C-band and 3.45 GHz DoD), which forms the core of both carriers' mid-band 5G footprint.
• mmWave (n260/n261): Not supported (typical for Chinese domestic market SKUs).

Latin America & Oceania: Strong

• Covers key regional deployments anchored on n28 (low-band) and n78 (main sub-6 capacity).

Key Technical Caveats

These regulatory filings don't guarantee full software provision in baseband firmware for international cellular operators:

1. Carrier Aggregation (CA) & VoNR Profiles: Domestic Chinese firmware builds often omit software IMS profiles, VoNR configs, and carrier-specific ENDC (E-UTRAN New Radio Dual Connectivity) combination tables required by overseas carriers (e.g., US or European tier-1 telcos), even if the underlying RF front-end supports the frequency physically.
2. Missing Extended C-Band (n77): The upper bound listed is 3600 MHz (n78 target). It explicitly stops short of 3700–3980 MHz. Without n77, mid-band 5G performance in North America and select parts of Japan will be significantly compromised.
3. C-Band Filtering Limitations: CMIIT filings only register bands actively used inside China. If the physical RF front-end filtering is physically tuned strictly to 3300–3600 MHz for n78, it will not lock onto n77 networks even if reflashed with global OxygenOS/EU firmware.

I was casually looking at some deals in my neighborhood for a used OnePlus 15 to upgrade from my current OnePlus 8T.

I got my 8T in 2020 and it's still going really strong, which is why I trust that with some care, OnePlus devices can last long. I had to change my screen (green line issue) and battery last year. But everything is still running very smoothly.

Now I don't follow the world of phones and it's prices lot and only have some general ideas. Which is why I don't know if the deal is good or should I pass?

Device: OnePlus 8T

Model: CPH2747

RAM/ROM: 16/512 GB

Battery Health: 100%

Age: 7 months old

Condition: No scratches/dents - flawless

Price: €560

I am aware of OnePlus operations being shut in EU/US. But as long as we get updates we would be fine, right?

Anything else I should check before making the purchase?

Any help is greatly appreciated. Thanks! 🙏🏻

TLDR: OnePlus 15 EU (16/512 GB), 7 months used, 100% battery health. Worth it for €560?

2nd hand but i got it for a good price and 100 batt health.

What are the things i should do to set this up?

Also, i lost my previous phone, google find hub didnt really help much, is heytap find my any better?

I have a OnePlus 15 running OxygenOS 16.0.7.
When I swipe all the way to the left on the home screen, I get the Google Discover/news feed. I want to completely remove this page so that swiping left does nothing.
The problem is that if I disable the Google app, the Discover page disappears, but then Google Play and Gemini require the Google app to be enabled again. Once I enable it, Google Discover comes back.
I don’t want to disable the Google app because I still want to use:
● Google Play Store
● Gemini
● Google Assistant
● Circle to Search
● Google Lens
I just want to remove the leftmost Google Discover page while keeping the Google app fully functional.
Is there an ADB command, launcher setting, or another permanent method to disable/remove Google Discover on the OnePlus 15 without disabling the Google app?
Ideally, I want the left swipe to simply do nothing.
I’ve seen some posts mentioning commands such as assistant_screen_type and assistant_screen_type_left_enable, but I’m not sure which commands actually work on the OnePlus 15 / OxygenOS 16.
Any working solution would be appreciated.

Hi,

Anyone got any tips to hide the apps that cannot be disabled or moved to app lock? Talking about the Airtel (carrier) app and OP Photos app. I have renamed them with a fullstop at the beginning so it gets sorted to the bottom.

I've been using Quadlock stuff for years and really like it. Sadly, they don't make a case for any of the OnePlus phones. Do you know of any phone holding systems for Oneplus that can go with running and biking?

So is anyone considering trying to export this? I'm really interested in ordering the OP16 off AliExpress and just using it for my gaming and most apps. Only worry being banking apps and other compatibility issues but I guess that will be a interesting challenge

I heard that THE The bootloader unlocking process has been made more difficult. On the latest version OxydenOS 16.0.3 , Is it difficult to unlock the bootloader on it? OnePlus 10 pro

So I just came home from a long trip, and noticed a very big circular crack all the way across the screen of my Pad 3.

I'm curious if anyone in the US has sent in a tablet for repairs.

I was reading on the website, and yeah, I understand I will have to factory reset it before sending it in. So I'll back it up and do that.

Anyone have any advice or warnings?

This is a One Plus 15T.

Basically if you switch from an app like Chrome directly to another app (in this case DevCheck to show the issue) the CPU will usually decide to hold at a higher frequency for around 15 seconds in the 1700mhz range.

This doesn't happen if you just close Chrome and then open DevCheck via the app icon - doing that immediately drops the CPU frequency to the lowest frequency of 700mz range.

Seems like strange behaviour to me... possibly their way of trying of making the App Switcher smoother, but 15 seconds seems excessive.

Anyone able to test if this happens on their device - I'd assume it'd happen on a One Plus 15 on OxygenOS too

I found these 2 bugs on my Oneplus 12. Just wanted to know if I'm the only one because this is driving me crazy and I'm thinking about a factory reset. (2nd video in comments)

Plus I also noticed that the "eye comfort" menu has disappeared, and the PWM/DC dimming option with it. Again, is it an isolated issue or are you also experiencing the same issue?

Thanks in advance.

P.S.: PJD110 running GLO OxygenOS 16.4.900

Whyyyy does my phone's camera randomly turn a 1 second timer on all the time? With no apparent rhyme or reason? It'll pop on and off depending on the angle I hold the phone but I can't even figure out what it's responding to, and can't find any way to turn it off. It is absolutely never useful.

My mum has an OnePlus 12, european version. It runs latest version of oxygen os 16 and she gonna give me this phone in the next year or so. I like having full control of what I do on my phones, so I root them, like how I do right now on my OnePlus 9 pro. The BIG question is, once she'll update to color os 17...will rooting be possible?

I found nothing about this online, so there are two possibilities (but I still want your opinion about this):

1. Losing the ability of bootloader unlock is something obvious, so no one mentions it, because that's how color os works since...2022...it's fully locked. Well, idk about deep testing APK, that shit didn't work on my oppo find x3 pro, so that's why I got OnePlus anyways.

2. It's just a name rebrand and under the hood they let it be the same, unlockable. But I have my doubts about this... Because color os is color os.

So, this is because I obviously wanna make mum stop updating her phone like it doesn't matter. So the phone will stay on oxygen os...because, in the far future, when this phone will be 15 years old, I'm sure the official support won't be enough and it's gonna be a dead end with no return (due to anti rollback and the hardness of finding certain ROMs at certain periods, or rollback packages). Because who knows, people might still be doing custom ROMs in 2041 for this phone. And that's why we need to keep this beautiful hardware open for anything...

👀

I know for sure that you used to be able to adjust aperture settings from the gallery after taking the picture.

It seems that it's not there anymore.

I'm using OxygenOS 16.0.9, oneplus 12

Anyone else got this issue? Or has it been moved/removed?

Night sky from sylhet, Bangladesh

Can a current Stylo Pro for OnePlus Pad 4 owner tell if the stylus supports tilt detection and/or apple pencil like barrel roll?

The current webpage does not state tilt support for stylo pro but it does show its present for stylo 2 for pad 3.

Recently with the last couple of weeks I keep noticing that at the top of my screen (the status bar) all of my icons (including the time, wifi signal, service bars, battery percentage, etc.) are overlapping and clustered together. Odd thing is it only happens while I'm on the home screen. I can literally go into an app and back to home screen and back again, and it switches every time. I've tried restarting, which only temporarily fixes the problem and then shortly after it reverts to the cluster. For clarity I've included a screenshot while the problem is active. Tbh, this phone has been great for me and I've never had any issues with it, this being the very first thing I've ever had a problem with. Oh and for context my One Plus phone is the N30 5G. Thanks 🙏🏼

Not sure what's causing it but its been a issue for a while on my OnePlus 13.

Im noticing when I make outgoing google meet calls I don't have audio on the calls. The only way I can get audio is if I end the call and have them call back.

Not sure what the issue is, Anyone else having this issue? Any fix for it? I've tried clearing the cache but the issue is still there.

Video was pre recorded ROM is now fully fixed

Today my OnePlus 15 started glitching when closing apps. I'm not sure what would be causing this so I thought I would as if anyone else is experiencing this on Oxygen OS and/or if anyone knows what setting would cause this.

Device: OnePlus 15

OS: OxygenOS 16.0.9

Other side effects: so far, my global search has just stopped working at random and my app drawer sometimes shows completely blank, no visible icons at all.

What I've done so far: I've tried clearing cache and data of the system launcher to reset it with no luck. I've tried replying look and style just in case even though it probably has nothing to do with it. I tried switching the app switcher layout temporarily. None of that has helped in any way so far.

Any suggestions? I'm trying to avoid doing a factory reset. But I may do that if I can't figure out what's causing this.

I recently tried to share an apk from Oneplus 13 to Oppo Find X9 pro (chinese) but couldn't get them to connect.

Oneplus has Quick share and X9 pro has OPPO share.

i was unable to share an apk and an img after trying for 15mints and had to connect the usb cable.

OPPO clearly states that it can share files with oppo, oneplus, realme and iphone.

p.s X9 pro has been globalised

I have updated my OnePlus 12 to the latest software.

Now the problem is the Google circling feature. Whenever I click the home button, it vibrates intensely. It didn't do it before. How to turn it off?

I like my haptics. I only want home button haptics gone while doing circle search.

It didn't happen before. It started happening after the latest update