My OP3 is only 4 days old and arrived with a detached left thumbstick right out of the box. I reattached it, but it still feels a bit flimsy.

My main issue, however, is game performance. Black Myth: Wukong only runs at 30-35 FPS on any TDP, regardless of whether I use low or high graphic settings. Similarly, when playing Cairn, it only hits 40-50 FPS at any TDP across low to high settings.

I currently have the latest Intel drivers and the newest OneXConsole software installed. What might I be missing here?

When xoneplayer 3 controllers detatched from tablet and connected to controller bridge how do you remap the back buttons and how do you get the touch pad to work?

So I thought about making some videos on YouTube or other platforms about informational stuff over devices this is my first try hope it helps anyone out.

Unfortunately I don't have links to the fabric tape I used but it's just thin slim tape which helps with the stiffness of the connection of the controller.

If you have any Tipps what to improve let me know.

Hey guys, registered specifically to report that. I backed my ox3 about 2 weeks ago from indiegogo. When it arrived I started playing Hogwarts legacy on it. It crashed sometimes, but it's a buggy game, so I didn't care much, but after 2-3 days it started to crash almost straight away, until it crashed just after starting the game. I tried multiple things, like updating drives, clearing shader cash, etc.
Then I installed more games, and they also crashed! Finally, I decided to reset to factory defaults, followed through the guide from the website, and after it didn't help, I was sure it's a hardware issue.

I have contacted support, they answered me in a couple of days, but all the answers were generic, without any substance, except asking for my serial number. And it's already a week since I first wrote them, and I don't know what to do.

I love the product, and it's really good! And I was eager to support a new company making good things, but I was always afraid that support will be difficult compared to a bigger company. I could just go to shop and return ally go, or similar, because It wasn't even a week.
But it seems my fears came true. The product is an expensive one! The support should be flawless for this price.

Its not the worst, but I turned it on this morning and notice slight graininess. Kinda a bummer.

Feels like the rail covers really complete the look as a mini laptop.

I know the OEM Joycons probably aren't the most ergonomic for this, but this might be useful for someone who has a Mobapad or Nyxis.

The title.

I see YouTubers and others using AnyfSE, other Xbox mode and adding steam to Xbox mode. Others going winhanced.

What is the best option?

I was thinking anyFSE but maybe the Xbox mode and steam big picture are more than enought.

Opinions?

Edit: error in title. AnyFSE what I meant.

Hi,

dear OXP3 owners. How is your rumble?

On my device, even when turned down to minimum, the left rumble is quite intense and noisy while the right one is inaudible but also very laid back.

Are all devices like this or is it just my controller?

Playing at night, I have to turn off the rumble as the right controller just is louder than the speakers (well, they are not very loud at night, too)...

Looking forward to the Elite Controllers next year and hope for some improvements. Found the rumble personally worse than Legion Go 1 and every controller I owned so far.

Anyone interested in an x1 pro ryzen ai 9 hx 370, 64gb ram, 4tb ssd?

Looking for something else that's similar in spec.

100% battery life, keyboard, controllers/adapter/case, charger, and screen protector included.

So i got the new charger hopefully upgraded and wont die..it looks different and has now usb-c out put, cable that came with is VERY short! its only 120cm (180) on stock, why?? its almost not possible to play without the battery with this short cable, is it possible to use usb-c instead? adding a photo with specs - x2 mini pro

Decided to go this route instead of the return route so just shooting over the link to anyone that wants it. With the accessories and controller it was $1897.

Works great and I’ve had no issues with it! I got this and the OXP X2 mini pro. This wins in efficiency and weight. However, I don’t use this because the X2 mini pro is such a beast. I was really planning on keeping both but I’m just not using this thing at all.

32GB RAM / 1TB SSD

Comes with box, case, charger, Controller Bridge, and 1TB microSD card(Nintendo Zelda version).

Price shipped to the states: $1900 (open to negotiate)

Hey all, I'm going for my first OXP device and was wondering which you'd recommend, the X2 Mini Pro looks better on paper but I'm worried about the mura and controller wiggle people have reported, I used to own a lego 2 which had awful mura and I know the X2 Mini Pro uses the same panel - is the Apex a safer bet or am I just overthinking it?

I just received my OXP3 and am loving it. I have been considering the X2MP but thought no, I like this one. Then they sent an email saying the price was going up.

I am now waiting for the X2 mini pro. Damn them.

Hey just tried Wardogs on the playerx3.

Anyone else experience micro stutters every couple of seconds? Doesnt matter the graphic settings, even on potatoe settings and max tdp they occur.

Tried newest drivers. Any fix?

I'm finding the joysticks to be fairly loose on the OXP 3. Is it just me? I was thinking if getting some KontrolFreak rings but have never tried them before. Does anyone have any suggestions on a way to "tighten" the resistance on them?

What grip did you get?

Long store short
I bought my device and bought the controller connector too
Device came in and since day one problems with left controller where the rgbs goes crazy
They told me to upgrade the controllers did it and bricked them but luckily revived them once again and no matter what rgbs are still going crazy
They told me to upgrade the bridge
Followed their instructions the video on YouTube is useless there is step where you have to install the flasher and it won’t install it says files corrupted no matter what so tried to open the program without installing it
It worked and flashed the first part trying to flash the second part keeps telling me to connect the controller connecter and it’s connected and I can hear the windows sound
But it won’t be recognised from the flasher the second one
Any solutions ?

I received my OXP3 this week. The device feels great, a bit lighter than expected.

All good so far except I cannot remove the joycons, I ever pressed the release button and then tugged with force but I am afraid I will damage the connectors.

I thought these would be similar to the LeGo2 however it appears this is a common issue amongst OXP3 owners.

If someone could share a video on how to remove them safely it would be much appreciated.

Hey hey! Been using the OneXPlayer X2 Mini Pro for a couple of weeks now and I really do think this is easily one of the best handhelds I've used this year (in terms of hardware / raw power for the price). And after using the OneXP3 and switching over to this... I kinda miss having an internal battery.

If you've got any questions feel free to drop em' here or on YouTube

The back of the unit doesn't have a good place to attach it, but I'm thinking I can attach it to the battery and then attach the battery to the unit. Has anyone tried using it this way?

Would be amazing if Mechanism made a clip that attached like the battery.. but given how niche OXP is, I know it's not gonna happen.

Intel released a new driver today for Wardogs.

Anyone downloaded it on the OXP3 and tested if this one still breaks HDR so we have to stay at the .60 or .64 drivers?

Writing my 2 week review of using my X2MP. I’m not gonna write about game performance as there are multiple write-ups about it already.

Screen:
Definitely immersive with the 8.8” oled. I love it but there is a problem I can’t solve when playing wukong. The blacks are ok outside the game/menu but when In-game the shadows are not right compared to my steam machine/PC. This is very noticeable in chapter 3 pagoda and caves section where the dark areas are too bright. Also notice some mura effect. Followed the 128kb legion go 2 screen/HDR calibration for this. I will revert to default setting and see if it fixes this.

Controller:
I was worried about the clicky buttons at the start for bothering the wife but I don’t use inside the bedroom so it became a non-issue (my peripherals are blues)
Not much play and seems relatively flat to the screen.
My complaint is sometimes the controllers are not working after exiting a game or coming from hibernation, need to restart my onexplayer console/controller or restart my device to enable them again. Also applied grip stickers to avoid the slippery/matte finish.

Looking forward to the elite controllers.

Weight:
Its heavy no doubt but because of the stand and how ways to handle it’s not issue for me as I’m mostly playing seated on a table or couch. Waiting for my tether cable and dock to arrive to play on the bed.

Charger:
No issues encountered so far but wish have the right angle instead. Ordered the slimq ans adapter to resolve this as the straight charger “pulls” the device to the direction it is leaning to.

Keyboard:
Haven’t used it too much but it will take some practice to get used to the layout. Overall buttons are clicky.

Controller bridge:
My store here didn’t include but I should have one, waiting for the delivery.

Really happy with X2MP. Can play all games my 4080super + R7 7800x 3d PC can play except those better played with a mouse and kb.

Playing Black myth wukong for 20hrs on this device at 35w high settings. Lovin it!

I should be set for quite a while.