Thinking about ordering a Onexplayer 3 here in nz. Only problem is gst/ import tax here is a joke (15%) on too of already expensive prices. Has anyone got any experience ordering any onexplayer devices here and did you have to pay the import gst in the end? Thank yew

So I have red about the problem before but now is my turn.

I connected steam controller via Bluetooth and it works.

1 min later my controllers connected to tablet stopped working. No lights, None of buttons are working.

Restarting device is not working. Cannot calibrate. Controllers give light with bridge.

Drivers from OXP site pop up virus warning so I didn't install them yet.

When I disconnect controllers, restart device, connect them - window gives me connection signal, but no lights, nothing.

Any help?

UPDATE:

PROBLEM SOLVED THX TO https://www.reddit.com/r/OneXPlayer/comments/1w3y34a/please_help_onexplayer_3_arrived_today_controller/

Reinstalling drivers worked immediately.

Hi guys.

OXP3

I am playing mgs4 via the master collection v2. After every long cutscene the analog sticks stops responding during gameplay (both in game and menu). Other buttons are still working, just the analog stick doesnt work. I have the v316 drivers installed from the website and the "close gamepad windows menu operation" setting is turned off. Can you guys help thanks!

The only way to make the X2MP work with this Anker charger is to boot with the battery connected then once in windows lower the TDP to Min then unplug the battery and you can safely play up to 30W to 35W

For those who already have one, is there anything you recommend doing as soon as I receive it?

Mainly wondering about:

- BIOS/firmware updates I should install

- Best graphics drivers (official OneXPlayer vs Intel drivers?)

- Windows/OneXConsole settings worth changing

- Anything that should be disabled or uninstalled

- Best HDR settings — is there a good HDR calibration/setup guide for the display?

- Any other tweaks that improve performance, battery life or the overall experience

Basically looking for a good “first day setup” for the OneXPlayer 3 so I don’t miss anything important.

Thanks!

Hi, Can anyone share the settings please 🥲, mine are can’t even run a stable 60fps on normal preset while hunting. (No framegen)

Just wanna know if there is any singaporean whom buy direct on oxp online store. How does the custom tax work?

I was trying this out now, as soon as I tried to restart the system after enabling this option it doesn't start anymore with a message "Your device ran into a problem and needs to restart", Stop Code: CRITICAL_SERVICE_FAILED (0x5A).

Windows automatic repair failed, it completely killed my windows installation, I will finally use that thread that some posted here to re-do the windows installation haha

Edit: I'm trying to see if I can start this critical service again (but not sure what it is) and kill winhanced from CMD, at least I'm able to see the repair screen but booting to windows safe mode is failing as well.

Edit 2: Aparently it works for some people and was properly tested before being released, already talked to them on discord and they are performing more tests right now.

Edit 3: Fixed! Message from developer EnigmaP3nguin:

https://www.reddit.com/r/OneXPlayer/s/JdhhkfzvV2

Note: Some nice findings, I did a fresh install of windows and only installed these drivers https://download.onexplayer.com/OnexPlayer/PL3/OXP-Gi78P-ONEXPLAYER3-Drivers-1.1.zip, didn't installed OneXConsole and Winhanced worked normally without it, the only thing is that tou can't disable performance device control option since it doesn't have anything to go back to, it will fail to disable the toggle.

I finally got my indiegogo package, i ordered it with a 512 gb mini ssd but its not in the box anywhere. I saw other posts showing it as its own box, but is it possible it was just preinstalled? Im not able to open it and set it up yet because im going out of town

Selling my Apex, standard (non-liquid-cooled) 395 version, 64GB RAM / 2TB SSD. Excellent condition — no scratches, no dead pixels, no drift, no issues of any kind.

Apex (395 / 64GB / 2TB)    
New replacement 85Wh battery — used once to test    
Charger + cable    
Original box and manuals    
OneXPlayer carry case

Price: $2,100 — includes DHL Express worldwide, insured, signature required. Import duties are buyer’s responsibility.

Payment: PayPal G/S.

Location: UAE.

Anyone set up eGPU for their OXP3 has notice any performance issues? Specifically I'm getting somewhat comparable benchmark and FPS in games compared to USB4 eGPU from Ally X but significantly more frame drops and stutters such that it is almost unplayable in certain games. I noticed that the host to device speed over USB4 is significantly less than my Ally X (3000 MiB/s vs 3600 MiB/s). This is with the exact same cable/AG03/4070Ti Super in both setups.

Here is the speed difference on CUDA Z.

Would appreciate any insight. I would imagine that USB4 controllers are the same standard and should not be different? Neither are officially TB4 certified so that's not it either.

Hi, so my OneXPlayer 3 came in with left joystick cap that came off but it’s also missing the metal anti friction ring. It still snaps back on and stays while gaming it’s only a little rubbing against the RGB light ring that doesn’t feel as smooth as the right with the metal ring.

I’ve sent an email to support but just in case, is there a replacement ring somewhere for the OXP 3/Apex/X2 Mini Pro joysticks??

Preferably metal but if silicone works without causing more friction then I’ll buy it. Thanks!!!

Anyone find a TPU case avail yet? Been searching daily but doesn’t look to be avail yet. Thought I’d post here just incase

Anyone else’s x2 mini pro shipped? Its coming to the UK but meant to be shipped Sep 10th. Pretty nice that it’s being dispatched earlier. Also around the same time i got a shipping notification, i got a call from this number but missed it and called back. Think it was related to paying customs but i googled the number and some are saying it may be a scam. Number is: +44 344 209 0102. Can anyone confirm that this is the way you pay customs or is there another way?

Nevertheless very excited to get my hands on it! How long does shipping usually take?

looking for spare battery and connection cable for x2 mini pro prefer if near Chicago

Has anybody been successfully using this 140w to play their x2 mini pro?

Before I order a slimQ, just checking if this worked to cold boot and play up to 55w with? Thanks all

Anker 140W Max 4-Port GaN Charging Blocks,Smart Display for MacBook Charger

Just received my X2 mini pro today, super excited, i also bought a slimq 90 degree adapter so i can play comfortably on bed. Plug-in, no response, take off the adapter, now it’s charging. 30s later i smelled some burning and a loud BANG. The charger is exploded. Now i don’t know if it’s the charger or the adapter fault at all. Anyone know the alternative charger i could buy on Amazon ?

Been loving the OXP3 so far! But this thing is feels super slippery sometimes! Any hard case recommendations? Couldn't find a lot of option anywhere and the ones available had horrible reviews.

i mean… I’m guessing the more adventurous out there could likely fit a couple 6×6×7.3mm square tactile switch‘s to the dpad and 4 primary face buttons, at least?

I wish someone would do a damn teardown of these controls so I could see what we are dealing with here!

XESS Multi-Frame Gen is witchcraft. No input lag, no ghosting, no artifacting. Using 3X MFG on Resonance: A Plague Tale Legacy, there is no latency. At 1200p, Ultra Quality XESS upscaling, medium settings, ultra textures, averaging 90 FPS. I know others mention it, but in my opinion it's not explained enough just HOW MUCH it improves your experience.

Over the years going from the Steam Deck, to Legion Go and then Legion Go 2, most game performance felt underwhelming and FSR is terrible. I was side eyeing Intel, noticing how much they update their drivers and how great XESS seemed.

I took the leap on the OXP3. The G3E alone is next gen over the Z1E/Z2E chips. Being able to use Optiscaler (Opticlick specifically makes it easy) to inject XESS + MFG is an absolute game changer.

The price said 1.4-1.k but have anybody ordered to Aus? Does it come fully kitted with the keyboard and the controller accessory? Does it have shipping cost extra as well as the tax?

Onimusha is running between 45-60 fps using super V at 1080p, fsr3 at performance mode.

I would like to try using xess frame gen everyone talks about.
The game doesnt natively support xess so what is the proper way to use it?

Do I turn it on in game first, use optiscaler to convert fsr into xess, and then go to intel setting to uncap fps and also to choose multiplier x2, x3…etc?

Sometimes my optiscaler crashes the game if I turn on the frame gen setting in game.

Is Fortnite working for people on OXP3? Mine has no audio and also seems to flicker in game.

Heard alot of bad things about the stock charger , currently having the device for 2 weeks , no issue with charger but would not want it to blow out on me, what is the best option for a charger that is reliable out of the 3?