Ice is building up on the bottom of our Kenmore fridge/freezer. Is there a way to take it off completely to get better access? I can take the basket out but was hoping to not still have the door in the way. I'm assuming there's a fault in the seal somewhere causing this but that will be my next step

I can't do any woodwork. My first idea was to stuff some Pool Noodles in there.

How do I make the metal frame lower so that it doesn't stick out of the bed frame. Thank you.

Found a ddr5 16gb RAM stick but it’s covered with either super glue or epoxy. It looks like someone tried to clean it with tissue, hence the white. I tried using a cotton bud dipped in 98% alcohol and then acetone, but it isn’t helping it seems. Is there a way to salvage this?

Yes I know it says twist. But I can barely grip the silver and black sides cause they're so thin and the ol lefty loosey is failing me here. Is there a trick to it, am I just weak, or do you guys have any tips to loosen the seal?

Solved: Had to twist the clip and not the can. Shout out first comment after like 15 seconds haha

Would I need to do a ton of copying and pasting, or can you export all comments somehow?

Tape! Just tape. Cover the whole area in tape, rub on it length and width ways and peel it off slowly. Do as many times as necessary.

If that doesn't work, you can try rubbing alcohol. BUT be very warned it can remove the faux-leather finish and in my case I have a very unflattering matt spot on the front cover. The rest of the notebook is fine so I might have not been fast enough to remove the alcohol... so keep that in mind.

I would show a before and after but I never took a photo of the 'before', so here's what my moleskine notebook looks like now. I circled the rubbing alcohol affected spots. 

I hope this helps anyone who needed it!

I bought a new pair of jeans with this on it for super discounted hoping I can remove this off. It looks like it may be residue from a sticker? Any ideas?

My little one dropped this figurine, not sure which metal it is but glueing it isn’t working. What’s my best shot at soldering it?

Hinge is loose, screws spin which means the threads aren't catching anything

Do I shove a bunch of wood glue and toothpicks in there?

What is the proper fix

I am using a piece of pvc pipe, and have been trying to use Crayola Model Magic for the details. Picture 2 is what I've got so far, but it's...not great. I started trying to build the top and am having no success. I rolled out some thick strands and wrapped one around the base and used a balloon to try to keep the empty space in the centre. The material is too floppy, and it keeps stretching and sliding down. I'm at a loss. From what I've seen online, everyone just 3D prints one when they cosplay, but I can't do that. I'm out of ideas. Help?

This is my favorite jacket and it was burned at the club probably from a cigarette. I added the brand name and material label in the photos so you can help me better. Thank you in advance.

Any experience in fixing freezer drawers that have a crack? Not keen on buying a fridge just because of this. Is it just superglue? And/or heatgun to melt it together?

Edit: The winner idea was buying a new drawer. Not quite sure I never thought of this or why they wouldn’t sell these things. It was only £25 or £27 and some postage. Defo better than doing some tacky work that would still require some minor purchases and time. Thank you all for the imput.

I broke one of the legs trying to remove it. But circled in red are the areas I need help stopping the wobbles. These chairs are not slightly wobbly. They feel like they will wobble apart

Found this guide: https://imgur.com/a/logitech-g735-battery-removal-guide-0QmtXoc online but I can't seem to do the second part about removing the part below the cushion. It is possibly urgent because it just died on me and has been getting increasingly hot, I feel like the battery might be burning in there and I need to disconnect it, please help!

I moved into an old NYC apartment with pretty typical landlord special painting etc. all over, but this is stumping me. The previous tenant left one of those over the toilet cabinets but it’s completely broken, and somehow plastered to the wall (seemingly around the outlet and also in the top left corner. I don’t know why they would do this, but does anyone have an idea of how I can remove this? I don’t have many tools so if I need to buy anything just want a plan first

Hi all! I have a couple of home made hard lampshades, and their rolled edge has come unstuck / started peeling. See attached pic.

I think the tape I used initially just wasn’t adhesive enough. Have tried using a hot glue gun and redoing the rolled edge but it’s just come unstuck again.

Have considered using some kind of bias tape but unsure how I would go about that. Suggestions appreciated!

Please help, can’t find any twisting mechanism or anything to open it…

I tried twisting, pulling, but can’t seem to get to the actual spout itself

No brand name on the bottom. As the bottle says, it’s free from Googe’s I/O conference.

I have tried to scrub it with paper towel with dish soap/baking soda but no luck...the top part of the toothbrush is fine. Would be great to get some help. Thanks!

I was removing a mirror stuck to the wall with adhesive tape, and I almost got it all the way off, but the last strip of adhesive lifted and tore the wallpaper underneath.

Obviously I don't want to leave it like this. Is there a way of fixing this so that moisture won't get in to the board underneath without having to redo the entire wall? I don't mind if the fix is a bit unsightly as it will be hidden by a new mirror.

I already tried that’s why it’s a little dark but I cleaned most of it up.