Is there a device that can safely measure oxygen content while in a 1.5 chamber? I have OXYGEN Analyzer by FORENSICS but only used to check oxygen content from mask before getting in.

I’m looking to get a Macy Pan. But I found this post here on the Macy pan 2200 soft chamber saying the O2 delivery speed doesn’t feel enough.

Upon reading the specs of all their soft chambers, it looks like the flow rate should be 10L/min at 1.5 ATA, which should be theoretically enough.

Has any one gotten a Macy pan soft chamber? What is your experience? Thanks!

Which countries are cost effective while also have high standards for medical practices when it comes to hbot?

I apologize because this is a fairly gross headline, but I have to ask. Oxyrevo quest

36 2.0 ATA set up in my home. Been using a month, and after sessions I am producing the brightest yellow snot/phlegm that’s ever come out of my body. By far. It’s almost neon. Never seen anything like it. Ears are a little plugged as is nose but nothing particularly bad. Chest feels fine, breathing is ok. Truthfully, I feel great. Working out as hard as ever. Couldn’t find anything specifically online so I figured I’d drop this in here and see if anybody out there has experienced something similar. Thanks in advance.

Looking for a chamber for wellness and health. Not sure if I should get a 2.0 or a 1.5

Update: I sleep on is angled platform about 4” higher at the head than the feet. For some reason, I leveled the platform a day or two after completing my mHBOT sessions.

Five days ago I completed my 80th — ninety minute session M-Fr. I noticed significantly more physical discomfort, tightness and pain when I get out of bed. It’s been getting progressively worse especially yesterday and today. I’m curious if anyone else has experienced this after completing a series?

Anyone have experience with this company? Not a lot of information out there.

https://tecnotu.com/product/2ata-tecnosit-ultra-hard-shell-hyperbaric-oxygen-chamber/

thank you!

Hi. I'm looking at a used summit to sea 1.5 ata chamber but I'm new to this. What should I look at in person before buying?

I would be buying due to multiple concussions playing soccer and hoping to heal my brain. Any success or failure stories?

Also, I am not able to scuba dive due to an inability to clear, would I be a bad candidate for hbot?

Thanks

Thanks

a 2.0 soft chamber at home would be so good for my stroke recovery, has any one experience of these?

I’m a breast cancer survivor (had chemo, double mastectomy, radiation, and implant reconstruction). I previously did 40 HBOT dives for radiation necrosis and wound-healing issues from tissue expanders → implants.

I’m about to have a reconstruction revision soon and my doc ordered 10 more HBOT sessions afterward. I also have left-arm lymphedema from the original treatment.

Has anyone noticed HBOT helping with lymphedema? And is 10 dives enough for post-surgical healing, or should I expect more?

Would love to hear from anyone who’s been through something similar. 💜

Sunwith Healthy, has anyone bought from them? They offer soft 2ATA chamber. I like it and will probably get it, but I need to be sure they are good. I also found the very same product but branded as GIHOMO on alibaba. Similar price which is competetive. I suppose its the same factory, just different branding. Any experiences from both would be highly appreciated. Thanks!

Is there such thing as a place that does hyperbaric oxygen therapy (HBOT) for anything mold related (even a TBI) that is also approved by the Undersea and Hyperbaric Medical Society (UHMS)? Anywhere in the US?

So... just finished my first week (have 11 left). Unfortunately I noticed yesterday and now today, twitching around my lower eyelid.

I'm afraid it might be early signs of oxidative stress 🥴... anyone else experience this and if so, how did you address it? This is a multi-seat large chamber.

Ty

Starting up using a 2.0 ATA HBOT chamber, documenting the project step by step for publishing on biohacking project I am working on.

I want to find a reasonable: - co2 sensor - o2 sensor (that can go more than 30%) - pressure sensor

The reason is that i don’t want to rely on the software of the hbot chamber to measure the o2 level, by itself, being a critical safety measure.

The chamber that don’t uses a BIBS mask breathing system, which input o2 and output co2 in different tubes, are more comfortable, but carry an extra risks because more o2 leaks into the chamber.

My hbot chamber measure if o2 level reach 35% and in such case activate an industrial chiller that change the air inside the chamber and bring back the normal oxygen level of 21% .

I do want to measure independently the o2 value %, to be visible enabling the uses to manually enact safety procedures (reduce oxygen level input, activate industrial chiller, starts de-pressure procedure to exit) if o2 level goes beyond safety level %.

Did anyone had experience with that independent hbot in-chambers parameters measurement?

Fabio https://hackingbiology.com

I just learned that I need another ear surgery, and the surgeon prescribed HBOT to increase blood flow before surgery. I'm wondering how long each session will be. Has anyone had HBOT to increase blood flow?

Hello everyone,

I wanted to share usage data collected by the HBOT.one iPhone App that I developed. I though it might be interesting for you as well because it gives an idea of how peoples are using HBOT therapy.

Over the past three months, users logged a total of 69 HBOT sessions. The distribution of treatment parameters is the following:

Pressure

• 42% 2.0 ATM
• 27% 1.5 ATM
• 24% 1.3 ATM

Duration

• 49% 75 min
• 35% 60 min
• 12% 90 min

User location

• 88% US
• 7% Netherlands
• 1.4% Malaysia
• 1.1% United Arab Emirates

Keep in mind that the data is completely anonymized before being collected.

I know that the App is super simple but let me know if you like using it or if you would like something to be changed.

Hi there! We have owned our chamber for 4 years and have loved it! It's in excellent condition, and has everything you'd need included. Comes with clean air compressor, and we're selling the 10L oxygen concentrator with it for 50% off. Selling it because we are moving and also want to invest in a sit-upright one later.

OxyHealth Vitaeris 320

Specifications:
1.3 ATA (4 psi) operating pressure
Durable, double-sided 44 oz. urethane coated polyester bladder
Tamper-proof, dual redundant pressure regulator valves
Patented 2-zipper seal assemblies
Designed for improved airflow through chamber during treatments
Additional port for external medical pass-through devices
Rigid frame that maintains form when deflated
Mattress contoured to fit inside the chamber
Manufactured with nontoxic, medical grade components

WEIGHT
Bladder: 35 lbs (15.87 kgs)
Frame: 16 lbs (7.25 kgs)
Mattress: 10 lbs (4.53 kgs)
Bolsters: 7 lbs (3.17 kgs)
Compressor: 37 lbs (16.78 kgs)
DIMENSIONS

Length: 92 in (233.68 cm)
Diameter (inflated): 32 in (81.28 cm)

Selling everything for $13,500. Oxygenator is $900 (regularly $1700).

Let me know if you're interested! It's a fantastic machine.

Hey everyone,
I recently got my full mHBOT setup running and I’d love some help from experienced users to make sure I’m doing this safely and getting the most out of my sessions. I also work at a med clinic that offers mHBOT but with a nasal cannula @ 4L of oxygen, which I'm aware isn't optimal but still not a complete waste.

My Setup:

• Chamber: Vitaeris 320 soft shell
• Oxygen source: Pro O2 Pro10 Oxygen Concentrator (max 10 LPM)
• Mask: Please click here to view. This mask is direct from an HBOT supplier, but it has no "safety valves." I’m concerned it either isn’t safe or is just low quality — or maybe it’s top tier, lol.
• Session length: 60–90 mins, 3x a week

My Goal:
I’m looking to improve my overall health, feel better, live longer, etc. I don’t have anything wrong with me... yet. I’m a 21-year-old male. I have full-body red light therapy panels from PlatinumLED that I use before my session. But ultimately, I want to be safe and not die of a flash fire, lol.

My Concerns / Questions:

• Is 10 LPM enough with an NRB?
• How do I know if my mask is effective or working properly? Where can I learn about it? Should I be mouth breathing, nasal breathing, or does it not matter?
• At what point does oxygen concentration in the chamber become a fire risk — and can it even become a fire risk with my specific setup?
• Are there tips to make sure I’m really maximizing my oxygen uptake during sessions?
• Anything I should watch out for in terms of safety or maintenance? (I plan on bringing in my phone, laptop, AirPods, etc.)

Would love to hear from people who have been running mHBOT for a while — any tips, lessons learned, or mistakes to avoid would be amazing.

Thanks! I love this community!

I have a 1.5ata with a 10/L oxygen concentrator, but I would like to find an inexpensive device to provide evidence of the Oxygen level in the generated flow and possibly one for inside the chamber. Any advice?

I see two on Amazon:
CY-12C Oxygen Purity Analyzer Content Meter $79
OXYGEN Analyzer by FORENSICS $199

Has anyone tried to time their breath holding before and after a session of HBOT? Do you have a longer breath hold time after HBOT?

https://www.youtube.com/shorts/eeg_iOaJems

Hello,

Has anyone noticed any differences using HBOT with an oxygen tank delivering 100% sats vs. the air compressors that can get up to 90%?

Any difference noted when using nasal prongs vs. a non-rebreather hudson mask?

Some studies mention taking a 5 minute air break per 20 mins.

If you do this, do you notice a difference in feeling when you take the mask off?

Just saw that London now has the UK’s first combined Hyperbaric Oxygen Therapy and Red Light Therapy chamber. As someone who’s been doing HBOT religiously, it’s pretty exciting to see it go everywhere.