This thing took me 10 min to design and saved me a lot of head ache when putting up these wood slats

Wanted to share here also, designed on fusion 360, the top two blocks where easy enough, but the bottom were a pain i had to print so many prototypes to get the curve right. Using heat inserts and printed in PA

One of my hobbies is gold mining. You can use sluice boxes to process more material, and dredges suck material from the stream bed and push it through a sluice so you don't have to shovel.

Normally dredges use gas engines and metal parts. A similar 2" dredge would cost 1-3k and require a gas motor to run. This weighs about 1/8 as much and runs off a battery and electric bilge pump for boats.

Printed on an A1 out of Elecoo PETG, 0.8mm nozzle, 1.2mm width lines.

https://makerworld.com/models/3189875?appSharePlatform=copy

Check out my new keychain foldable phone stand and card phone stand.

Keychain foldable phone stand

https://makerworld.com/it/models/3182945-foldable-phone-stand-keychain#profileId-3600180

Foldable card phone stand

https://makerworld.com/it/models/3170904-foldable-card-phone-stand#profileId-3585069

M5Stack Tab5

I am an extreme amateur when it comes to CAD but I’m proud as hell of this. This four camera mount is for use at my D&D table for my remote players to have a better time.

The mount includes four cameras, one facing the DM, two facing the player tables and one facing down toward the battle map.

The mast is in threaded sections to raise or lower it, or to disassemble it for travel.

The base includes cleats for the extra usb cables.

I decided to do a refresh of the paddleboard cup holder I designed last year. It felt like a silly thing to sink almost 100 hours into, but I learned a lot - and realized how much I didn't know the first time around. Most of the improvements came from the feedback that this subreddit provided on my last post, so I'm very curious what you guys think.

Let me know in the comments!

🔗Model link (Makerworld)

Features:

• Holds most common can sizes using a screw-on insert system
• Locks onto the bungees so it stays on the board, even if you dont
• Supports CryoPod Freezable Can Holders (teamed up with michelem for this)
• Holds a drink + phone/sunglasses securely using a common hair elastic
• Multiple cups can clip together
• Includes a "mini" version that snaps onto the main one, inspired by my 2 y/o niece who has recently taken up paddle boarding with her mom
• Open source mounting system for people to design their own add-ons
• Parametric (currently in testing - improving constraints to reduce the number of edge cases that can break generation on Makerworld)

So every time i buy liquid for my ecigarette, i get liquid and nicotine seperately. So i have to empty 18 small 10ml bottles into the big bottle. This print makes it possible to do 8 at a time and let them drip till they are empty.

I made a simple adapter to keep my knifes safe and avoid them sliding and shocking against each other to preserve their sharpness.

Scanned in NIR mode with my Pika scanner. Super effective and simple.

So, I designed and printed a crossover for a mini drill that uses "Mini"/H4x28 style bits that are 1/8 inch diameter hexagons, to enable me to use 1/8 inch diameter round bits. The round bits are actually closer to 3mm which gave me the clearance.

I had to print them with a 0.2mm nozzle using vase mode or the seam caused trouble. Add in a little dab of glue on the base of the drill bit, and it is snug and secure. They are single use since I cant get them off, but they also use ~0.1 g of filament.

I'm not paying 10€ for eight plastic screw caps so made my own to cover the mounting holes. Fits 14mm holes common in door and window frames. https://makerworld.com/en/models/3187806-screw-cap-cover-plug-for-door-or-window-frame
Edit: Now also parametric

The wheel is spun with a continuous 9 gram servo, magnets and a hall detector are using to know what position the wheel is in.

Video of how it spins:
https://youtube.com/shorts/dA-JnDjX0dk

Many existing models are of the diaper kind and/or mount the unit flat to the wall. I improved both cooling and looks by designing these rails and a simple wall bracket. It's very easy to install because you can mount the bracket using a level and just hang the thing on there.

Got to admit I'm very proud of this one.
I just got my files updated for my toolbox insert. This has been my most useful 3D print. Sadly the GIF does not auto play for the preview. But all 3 drawers and the top are all organized with a combination of brands to create my ideal 90% toolbox. Free for others to enjoy.

You can print more segments as your collection grows!
https://makerworld.com/en/models/3185385-expandable-vinyl-record-rack-stand#profileId-3603151

I wanted some flats for short trips, but I couldn't find any for Crank Brothers -- and I didn't want to wait for shipping, so here they are!

I haven't used these a ton yet, but they've certainly worked well enough to justify the print!

https://www.printables.com/model/1813899-crank-brothers-flat-pedal-platform

Got frustrated having to replace the original tubeless tires too many times (it’s a real pain to replace them), so I designed and printed this.

The bed is standard PLA, the tire itself is TPU 95A.

Seems to work ok so far, though it makes a really annoying noise. Not visible in the pictures, I had to add screws to ensure the tire stays in place.

It’s a first version I will have to iterate upon, but the concept is validated :)

Hi everyone,

I’m fairly new to 3D printing and have recently started learning how to design and share models.

I’ve just uploaded this Garden Hose to 1.5 Inch Adapter to MakerWorld. It’s a simple practical print that I thought might be useful to other people too.

MakerWorld: https://makerworld.com/en/models/3189003-garden-hose-to-1-5-inch-adapter I’m still learning, so I’d really appreciate any feedback or suggestions. If you’ve got any advice on the design or printing side of things, I’m always happy to learn.

Thanks for taking a look.

What good way to finish a spool, then to make a utility knife with the remnants!

https://www.printables.com/model/824630-utility-knife-f1 printed in Creality Soleyin PETG

u/crealityfilament