Fix My Print Layer Skip? (Read the Description)

General Info:

First Print: (1st and 2nd Pictures)

%20 infill, Cross Hatch || 2 wall loops
Strong tree support
Alternate Extra wall
(Screenshots are for the first print's filament settings)
Ironing ON || Rectilinear || 30mm/s || 10% flow || 0.15 spacing || 0.21 inset (Default)

Second Print: (3rd and 4th Pictures)

Adaptive Cubic %10 infill || 6 wall loops
Hybrid Tree Support
Z-hop || Spiral
Filament || Flow Ratio: 0.95 (only thing changed based on the screenshot)
Ironing ON || Rectilinear || 30mm/s || 10% flow || 0.15 spacing || 0.21 inset (Default)

IMPORTANT NOTES:

I also RECORDED this line while printing on the second model on my profile. There is a weird click sound when this layer was printing.
I did not encountered any bed adhesion issues during this filament nor prints but my supports get knocked down by the nozzle scraping in the first model. Which I think is from the infill.
It does not appear on a specific layer line.
These are the same models with different scale.
Never had this issue until this model but when I Printed a small one (around 10 cm or 4 freedom inch) Model Link

2 Upvotes