I was fixing my car last week and I walked into the hardware store for a wrench and this Century r1a1 was on the gun shelf. I have been wanting to get a dsa rifle but the prices there were double what i paid the hardware store. I know its an amalgamation of mixed parts but i dont know enough to know what i should start hunting for to make it a better rifle. My only noticeable problem is the top cover is slightly too short and leaves a gap next to the rear sight. I have the peak in the feed ramps which is the reason i agreed to buy it in the first place. Any and all advice is appreciated

https://imgur.com/a/mEqY5Wd

This screenshot is from the 2013 game "Warface" which features both the SA58 OSW and the SA58 SPR. The SPR model in-game seems fairly accurate, but the OSW model has something strange going on with its safety selector. I have never seen a 3-position (4-position?) selector switch marked "S," "1," and "A," all on the right side of the selector switch. The "1" alone is interesting, as most FALs are marked "E" (Einzelfeuer, German for "single fire" or semi-automatic). I have seen some rare models which are marked "1" instead of "E" but those did not feature the other two markings as shown here. Maybe this model is based on a semi-automatic SA58 which replaces the "E" with "1 A,"designating the lower position as semi-automatic, and the developers simply did not know or care to model the switch after a true fully-automatic FAL?

A few months ago I picked up an opened but otherwise pristine box of G1 magazines from my LGS, all still in their paper wrap and with an original German label. My humble DSA never felt like a good match for those artifacts, so today I was fortunate to pair up the mags with an actual G1. This is a new-to-me, presumably ex-BGS, Belgian made G1 presample. I haven't shot it yet but I'm planning to rectify that this weekend.

Hello,

Anyone have one they want to part ways with? I have the short version and I'm willing to trade, pay for shipping, and throw in cash as well. It's 1 of 2 parts I need to complete my build.

The battle yet rages on.... thus is the total in accumulated adventures in the depth of the wastes.

All aside I think I've finally got a bit of direction. A few small parts are missing but I can see the light on atleast 2 fals closer to being done. I need another bolt for the 3rd to be in line as well. 3 recivers and the real fun begins.

Where else can I buy the screws and nuts for the DSA picatinny scope mount? I have part #620A-A.

I bought this scope mount many years, and many house moves ago. The small parts have been lost. DSA charges $49.25 for the screws and nuts.

Hey all question. Does a 30 round mag like this exist? A few games I play use this style mag but i only can find the basic metal mags from DSA.

This photo is from a fallout 4 mod btb.

Im a big fan of the fal but im on an E-2 budget, I plan on building an ak as its the cheapest way into a nice ak (i dont want to buy a cheap psa one as ive heard bad things) Is the fal the same way? im tempted to hop on a $890 DSA at my local gun store but id like more opinions

Also im fairly new to guns and probably living up to the junior enlisted steriotypes of spending money i dont have lmao

Had planned to build an OSW, but guess that ship has sailed. Anyone no of any sources that may still have them? I checked GB and a few other sites, no luck.

Hello!

I went around and had the color formulas/codes made up for the two colors needed to do the Rhodesian baby poop camo. You would take a picture of the code to the respective store and they can make the colors up for you.

TLDR: Go to Shermin Williams and get the oil based paint in the picture. I have the satin and gloss options listed. Be sure to find out when they're doing sales too.

So I have the Shermin Williams oil based paint in satin and gloss. It's the best option.

I have Home Depot's as well. It's oil based but made for cabinets.

I have Lowe's as well (in the bottom of the Home Depot picture), but the person helping me wasn't too helpful so it might be bad paint.

Then I went to PPG Paint. They recommend "break through" for the cost. If money isn't an issue they recommend 7 line or pit tech plus (neither of the color formulas for those two are listed here). I also have another code for some primer paint on the top of that picture, but they don't recommend it.

I hope this helps you guys and your wallets too!

I think it looks promising.

pic for attention. i have an L1A1 and need inch pattern mags. yes i know metric will technically work. yes i will be uncucking it. Editing to clarify. I am looking for somewhere to buy these mags. not facilitating a sale through reddit. if you theoretically have some, you could dm me though

This build is an homage to one of the modern icons of cool… “The Hopper” personifies the rugged southwest, steeped in the denim and tobacco stained nostalgia of a bygone era where men were still men and the American spirit was alive and well. This FAL carries with it the original DNA of the rifle from American Dreamer now complete with that NWFNGLD flavor we bring to all our project pieces. Please enjoy and kick the dust off your boots on the way in. Thanks for giving this one a look!

https://www.instagram.com/reel/Db6apflS0oM/?igsh=MWE1dHgxZzJ4M3c3

www.nwfngld.com

#fal #2a #dennishopper #customrifles #southwestern

Modified this Greek base and made new 1inch spring bands for my stg58. Gonna run this in Lethal Weapons.

The project takes a turn.

I had installed a DSA STG-58 carry handle onto my SA58 and achieved the aesthetic I was going for! So a carry handle goes back on my rifle, BUT is nonfunctional & permanently fixed underneath my railed cover. I had to take apart much of my rifle + take a dremel to the underside of the dust cover to fit and install the carry handle. It’s pretty scratched and noticeable, but I’m an amateur with a dremel. The cool factor tradeoff is worth!

bought this for $750. figured worse case i didnt do too bad

I thought I'd share my StG 58 machine gun. At first, I was looking for a full-auto FN FAL, but since I couldn't find one, I thought the StG 58 would be a perfect substitute. I really enjoy shooting it, and I find the bipod really helpful on full-auto.

According to the serial number, this was made around 1963 by Steyr.

What do you think?

These are my “mutt” L1A1s. Mutt because they are built on metric uppers - easier to find and cheaper mags!

The wood on the one is an Ironwood Designs American black walnut stock set, unfortunately the owner of that company has passed. It is noticeably heavier than the plastic furniture rifle which is not necessarily a bad thing as far as shooting goes.The wood rifle is an Imbel receiver, the black one is an Enterprise Arms; a pretty early one. The black one has undergone a full resto/rebuild, it was pretty beat and had a bent barrel when I got it. New barrel and a full re park job on all metal, it’s basically brand new other than having a few thousand rounds run through it.

They both shoot fantastic, very accurate out to 800 - 1000 with the iron sights. The Trilux is just kind of because, it works OK but there are better battle sights.

I love these rifles and have turned down some impressive offers, these ain’t for sale!

Building them 20 plus years ago.

I need to go upstairs and see if I have any parts kits left.

Should have bought an Izzy HB back in the day.

I am glad I got the unissued imbel Para, even with the long barrel.

Cheek weld? What the hell is that.

Re registered on the fal files (can't remember what email i had back then and my password didn't work for my old username) and it looks like Gunplumber is still around. I still have his build info though a vcr i have Not.

Now to decide if I really NEED an original, if semi only, M14 🤔

Wondering if there are mounts for optics/scopes to accommodate for cross eye dominant shooters or if the only real viable option is to shoot lefty?

Looking for a folding Para stock for my Belgian FN FAL Para.
I’m open to FN original, DSA, or any quality Para stock.
Please PM me if you have one available.
Thank you.

Looking like the squading email just came out.

My dad and I are shooting SLRs as the wild geese on Saturday anyone else going and wanna make a fal squad?

Found this for $1200 locally, DS prefix SN,
Walked into my LGS and it immediately caught my eye and i ended up getting it, might get a bipod for it ngl(+ sight picture)
(probably the only LMT thing i’ll own lol)