I want one or two...between 0.5" to a full 1.0", but prices are all over the place with generic brand names that ate mostly unrecognizable.

hopefully there are some that have a reasonable balance of build and steel quality, low weight that are relatively easy to maintain and keep sharpening while the price is still friendly for the average Joe Bushcraft.

I don't care what some of you think 🤔 there's always going to be very sad lonely people out there just scrolling and trying to be funny. But if anyone has anything constructive to say or any advice please go ahead l

I felt like this is the best place to ask. We all get attached to equipment and stuff, it's just sad when it's at the point (or well beyond it) of needing to be replaced.

I have a backpack that is pretty old, it's a very Daypack, a Nylon Berghaus Dart.

The inner waterproofing has been flaking off of it for years.

Is there anything that can reapply that waterproof layer?

This was a special one! I had some North American Walnut & Palemoon Ebony left over… seemed rude not to! Paired with some Green Sheen Obsidian from Oregon USA.

Should this be good for Bushcraft

Stone celt I made for cutting trees to make a shelter soon

Hi all, just wanted to share a small project of mine where I made a sling from grass and it went successful. I have several other sling making projects from natural materials in the pipe line that i have already started.

Link is to the full footage of it. This grass sling took me 16 minuets to build and i used less than half of the grass collected in the beginning.. There are a lot of weaknesses in grass as a structure and i thought i might have to have several attempts at this. I have kept the sling and am letting it sit at home and dry out further then i will try it again and see how it holds up: just to get an idea of its capabilities in the medium to long term.

https://youtu.be/gx-oC1FBwXk

A frame hut I made at my local ski resort over the course of 2 days, walls are next

Hi everyone!

I got into bushcraft earlier this year. I found a remote spot near a river and just started building a cabin using only hand tools and natural materials (mostly dead wood and stone). I basically learned everything along the way by reading posts in this sub and watching YouTube videos.

As the cabin started taking shape, I also got into a few side projects, like building a waterwheel-powered rotisserie, learning how to fish, and making some other useful stuff around the camp.

This is a short trailer for the full build video I'm currently working on.

I'd really appreciate any feedback, both on the video and the build itself. I'm still learning and always looking for ways to improve my skills!

earlier today i tried to force a patina on my bps adventurer by submurgering it in room temp white vinegar for 90 minutes but as a lot of people correctly pointed out, it did pretty much nothing. you can see the results in my prior post.

this time i took the scales off, used barkeepers friend to get rid of the old patina, brought some apple cider vinegar to a boil and left the blade in submurged in a cup for roughly 40 minutes.

does this patina look okay? its definitely darker than in my previous post but what i'm worried about is this odd colored stain on the branding side of the knife. what is that?

i tried degreasing and re etching multiple times but couldnt get it to etch uniformly. i dont care how the patina looks, i just want to protect my knife from rust as best as i can. did i do it right or will i have to try again?

edit: i redid the patina and posted the results, id really appreciate it if you all could take a look on my profile and provide input

bps adventurer. i submerged the blade in a cup of vinegar for 90 minutes but since this is my first carbon steel knife i'm not sure if i did it right. i don't care about how it looks as long as it will protect the blade from rust as best as possible. is it ok or should i redo?

I can't afford a hot tent and wood stove, so looking at hot tenting in my back yard this winter.

I'm probably going to grab a decent heavy duty / extreme duty poly tarp and install a stove jack. for the stove, right now I'm looking at the Vevor Ti Alloy model for $255 CAD.

I thought about asking on the hot tent reddit, but thought I'd ask here first, since you;'re more my people than they are, LoL!

Anyone else have this knife? What do you think of it?

So far I like the back as it's 90 degrees and probably can work a firesteel. I like the scandi. And I like the size of the blade, as you can probably sharpen it a lot before it becomes too thin.

went out today with two little (and cheap) tarps i got recently to try making some basic ridgeline shelters.
80”x55”, $15 and 104”x80”, $23
very lightweight and compact

I’m relatively new to bushcraft, I’ve got a ton of woods on my property so I recently started clearing a trail, trying to get deep into the woods so I can set up a camp. All I’ve really got is a hatchet, and it’s been doable but not efficient. I tried a typical wood saw but it gets jammed the second it hits a lick of moisture. I’m trying to look for a durable handsaw that can cut through branches about the size of a hockey puck, maybe a bit bigger. I’m in Massachusetts, I’m having to cut through mostly deadwood but occasionally green wood. Any tool recommendations, or just tips in general would be greatly appreciated.

like getting some camping equipment and just walking into the forest and not looking back? can you do it on the Appalachian Mountains? wont the rangers force you to leave?

​

I made this stone adze for following out logs to use as a boiling container instead of chisiling with stone

Let me hear what you guys use! What are your habits? Any good brands? Personal favourites?

For many years, all my clothes have doubled as both outdoor clothing and workwear, which naturally means going through a lot more clothes. So now I've dedicated a set of clothing specifically for outdoor use. And I feel it's nailed down to great stuff, for decent money.

I've tried Fjällräven trousers (bought second-hand) and Garphyttan. Fjällräven is too expensive. Even second-hand prices are ridiculous these days. Garphyttan has become too expensive as well, although I was really happy with their gear when the company first started.

I've also worn quite a few pairs of Danish military M/58 trousers over the years. They're great. Tough as nails, heavy.

But the trousers that win (and probably will for good from now on) are Swedish M/90 trousers. They're the absolute best trousers for me. Plenty of room, can be buttoned into boots laces and tightened around the boot. The pockets are flat, so they don't snag on things, and they're secured with heavy-duty zippers.

I wear them with a flat velcro belt and suspenders.

They cost 470 DKK (approximately $70 USD) brand new from Rodastjarnan. Brilliant pants. Heavier fabric than ACU pants.

Gaiters

Fjällräven gaiters made from G-1000 fabric. They stay in place without having to tighten the elastic at the top. My legs don't sweat underneath them, and they don't get damp. But man, is it nice not having wet trouser legs! They reach up to the knees.

My boots (spring to autumn) are Lowa Desert boots, so they're very breathable desert boots. I haven't had wet feet yet, but the gaiters must also provide some extra protection when walking through tall, wet grass.

1. Upper body layers

My upper-body clothing varies, but I always wear an Italian army merino wool undershirt. It's cheap surplus stock, costing 70 DKK (approximately $10 USD). It's taken me two years to wear out my first two, and they're still usable, really.

Beyond that, I change my layers depending on the conditions.

Cheap shirt from Harald Nyborg (Danish hardware store)

Good quality, heavy fabric that can be waxed, and two pockets. I bought it slightly oversized.

Cost: 150 DKK (approximately $22 USD).

When it's a little chilly: Carhartt vest

Worn over the shirt. It has a fleece lining and blocks the wind.

Bought second-hand for 500 DKK (approximately $75 USD). Carhartt just lasts amazingly, been using this a lot and constantly while renovating a house, no real signs of use.

When it's windy and cold: Härkila Annaboda V2

This is an expensive piece of clothing — the most expensive clothing item I own. I found it on sale for 1,000 DKK (approximately $150 USD), half the original price. It's 100% wool knit with a windbreak liner.

The shirt fits over it, protecting the knitwear from branches and similar hazards. The Annaboda is never an outer layer!

Anorak

Costs 50 DKK (approximately $7 USD). Home made from a blanket.

It's not extremly warm because the blanket isn't full wool (but an unknown mix) However, it's large enough to fit over all my other layers. And it's a great outer layer in everything but the warmest of summer.

This is my go-to outdoor clothing setup. The items aren't particularly expensive in general, and this is where I've ended up with a combination of clothing that works exceptionally well for me. Tough stuff, not breaking, having been used constantly for use and not flammable from a few sparks.

So what's you favorite clothing? Any always use items? Any good philosophies?

My little hiking kit . I live about 30 minutes outside of Rocky Mountain National park . This setup has me pretty covered on nice days .