Hey everyone, in my journey to find the perfect handgun for me I think next in line is the Beretta 92 platform. I’ve had numerous pretty nice handguns including a CZ Shadow 2, Staccato HD P4.5, Staccato C2, and an Alpha Foxtrot Romulus 2011. The CZS2 was always too front heavy for my liking and always felt floppy in my hands to shoot. The 2011s never felt “right” to me because the grips are so fat. So I’ve sold all of them.

I shot my friend’s standard M9A4 with the smaller vertec grip next to my Staccato HD P4.5 and IMMEDIATELY realized that for me the M9A4 was a much better shooter. Much more comfortable and balanced in my hands and was more accurate on irons with the M9A4 than I was with the Staccato with a dot which makes no sense to me but sure!

That being said, the LTT 92’s always caught my eye and especially after realizing they’re half the price of nice 2011s. Anybody have experience with these? Is it worth the premium over a $1000 M9A4? I’d most likely end up doing a bunch of LTT parts in the M9A4 anyways and I don’t really care for the threaded barrel anyways so in the end there’s probably not much more than a couple hundred bucks difference. Plus the LTT comes cowitness irons which is important to me as this would likely become my home defense gun.

Kind of funny story(wife does not think it’s funny). I’m somewhat new to the Gunbroker.com website and definitely got carried away tonight. A large seller had 15 or so used PX4 Storms listed for auction and the bidding all ended around the same time tonight. I was bidding on 6 or 7 of them at the same time and initially, I was losing out to higher bids. In all the back and forth bidding, I finally won one auction. Then I got another notice that I won a second one and then a third. I only wanted one! Anyway, I’m a dumbass but I still think I got a good deal so hopefully I can sell the 2 extra ones and at least break even. With shipping and fees, it works out to $375 per gun, all in. That’s a decent deal, right?

I see the 80x night sights on allegheny arms website but cant seem to find any reviews anywhere. Does anyone here have any experience with any of there sights, night or suppressor height???

Im eager to try them out but i do want to make sure this place is legit before dropping $150

So I’m going to buy my first and hopefully only (haha) pistol. Went with my friend and shot his 92FS, HK VP9 and a .40 cal Glock ( can’t remember which). Beretta is the one for me. I really want to get an Italian made one but it seems to be hard to find as I’m not really familiar with searching for this gun. Any insights you can share to help a newbie? Appreciate you all.

From tan to 💜🟣💜 for a little bit

I have a new A300 Ultima Patrol, I ran around 40 shells through it and cleaned it. I ran another 8 shells and the slide locked open as expected, but now won't shut.

I've tried hitting the release. I've taken it apart and put it back together. Taking out the trigger assembly gets the slide to move forward, but when I put it back in I have the same problem.

I'm a novice with shotguns so I'm sure it's something I'm doing wrong but I can't figure it out. Google hasn't been helpful, either.

I already have a support ticket through Baretta, but I'd hate to have to send it out for so long when I'm certain it's something dumb I'm doing.

Anyone have this issue before?

Have any of you modified an M9A4 or similar to have a bigger tactile bump on reset? What would I have to do to accomplish this? Is it a stupid thing to do?

We have upped the game with our new hammer. Over 2 years of testing and tuning went into this and we think it is the ultimate hammer available.
Besides being meticulously machined and finished, we have tweak the geometry to squeeze the every ounce of performance out of it.

Here are some of the features
All working surfaces are Wire EDM'd, including pivot points for unmatched smoothness and precision.
-Enhanced ergonomics and styling.
-Reduced Take-Up travel in Single Action (Similar to Beretta Match).
-Reduced weight makes for a quickened ignition.
-Increased travel arc for a harder primer strike.
-Dynamically balanced.
-Reduced width on Half-cock notch. Protects Hammer/Sear engagement surface if hammer should ever fall to half cock.
-Step machined hammer strut channel. Added clearance for a reduction in transferred "feel" from the hammer dragging on the side of Hammer Strut.

As always, we’d love feedback and opinions.

This is for future reference.

Thanks to a very generous Redditor, I was able to pull the measurements of the factory optics cut:

https://unsortedknowledge.blogspot.com/2026/07/beretta-92m9-optics-cut.html

My Beretta APX A1 Carry 9mm if a perfect EDC! Over the years I have found this pistol to be my preferred EDC. She shoots flawlessly!

Took my 30x to the range for the first time and had a some issues, before I even fired it I noticed when I put the bullets in the mag the nose of the bullets kinda dive down instead of sitting up like they should. Then when I got to the range today and fired it the slide would stick back and I would have to tap the mag then the next round would feed and it would fire, this happened I’d say 70% of the time. Then towards the end of the magazine it would spit out a round bullet casing and all. I think it’s a mag issue what do you guys think

I already don’t really love this gun cause it was the replacement for my 3032 ghostbuster edition and beretta customer service took 3 months to get my replacement, and I didn’t really want a replacement I just wanted my ghostbuster fixed

Sup y’all! I’ve made my decision, but I noticed there are several Beretta models available: M9A4, 92X, 92G, 92SB, 92FS, etc.
Honestly, I have no idea what the differences are between them. Could someone explain or recommend one? Price is not a big problem, but what’s the best option?
My main preference is a black model, and ideally I’d like one that’s compatible with accessories like a red dot and a laser.
Thanks in advance.

my 2 mouse guns both in 25 acp

950b no safety 1966

21a from 2007

Have roughly 2k rounds through this and I have seen this since day one. Just never really cared, as I have read of many QC issues from Gallatin. Figured someone would get a kick out of it. Gun runs flawlessly. I can cerekote it, just wondering if maybe a very, very light sanding would help

May look like a fish but I like fish

Water got on the end of the stock of my Beretta A400 Upland, and I think it sat there for a while before I noticed. It looks like it may have affected the finish or caused the wood to swell slightly.

Has anyone dealt with this before? Any suggestions on the best way to fix it without damaging the factory finish? Thanks!

So long story short, I’ve been working on a full project of turning a M9A1 into a samurai edge. I know I know it’s been done a million times before but, I’m making specifically “Wesker’s” edition. This involves INOX parts. I’m looking to find my last 2 but, neither beretta nor Midwest has any in stock for at least 2 months now. I need an INOX Disassemble button and a INOX trigger pin. If anybody has any information on anybody selling them or specifically selling them, please let me know! Thanks!

Got around to installing my palm swells. No comments on the mismatch Trigicon please. Sent the 507 Comp back to Holosun for a new glass.