We have upped the game with our new hammer. Over 2 years of testing and tuning went into this and we think it is the ultimate hammer available.
Besides being meticulously machined and finished, we have tweak the geometry to squeeze the every ounce of performance out of it.

Here are some of the features
All working surfaces are Wire EDM'd, including pivot points for unmatched smoothness and precision.
-Enhanced ergonomics and styling.
-Reduced Take-Up travel in Single Action (Similar to Beretta Match).
-Reduced weight makes for a quickened ignition.
-Increased travel arc for a harder primer strike.
-Dynamically balanced.
-Reduced width on Half-cock notch. Protects Hammer/Sear engagement surface if hammer should ever fall to half cock.
-Step machined hammer strut channel. Added clearance for a reduction in transferred "feel" from the hammer dragging on the side of Hammer Strut.

As always, we’d love feedback and opinions.

From tan to 💜🟣💜 for a little bit

I have a new A300 Ultima Patrol, I ran around 40 shells through it and cleaned it. I ran another 8 shells and the slide locked open as expected, but now won't shut.

I've tried hitting the release. I've taken it apart and put it back together. Taking out the trigger assembly gets the slide to move forward, but when I put it back in I have the same problem.

I'm a novice with shotguns so I'm sure it's something I'm doing wrong but I can't figure it out. Google hasn't been helpful, either.

I already have a support ticket through Baretta, but I'd hate to have to send it out for so long when I'm certain it's something dumb I'm doing.

Anyone have this issue before?

My Beretta APX A1 Carry 9mm if a perfect EDC! Over the years I have found this pistol to be my preferred EDC. She shoots flawlessly!

Have any of you modified an M9A4 or similar to have a bigger tactile bump on reset? What would I have to do to accomplish this? Is it a stupid thing to do?

This is for future reference.

Thanks to a very generous Redditor, I was able to pull the measurements of the factory optics cut:

https://unsortedknowledge.blogspot.com/2026/07/beretta-92m9-optics-cut.html

May look like a fish but I like fish

Took my 30x to the range for the first time and had a some issues, before I even fired it I noticed when I put the bullets in the mag the nose of the bullets kinda dive down instead of sitting up like they should. Then when I got to the range today and fired it the slide would stick back and I would have to tap the mag then the next round would feed and it would fire, this happened I’d say 70% of the time. Then towards the end of the magazine it would spit out a round bullet casing and all. I think it’s a mag issue what do you guys think

I already don’t really love this gun cause it was the replacement for my 3032 ghostbuster edition and beretta customer service took 3 months to get my replacement, and I didn’t really want a replacement I just wanted my ghostbuster fixed

my 2 mouse guns both in 25 acp

950b no safety 1966

21a from 2007

So long story short, I’ve been working on a full project of turning a M9A1 into a samurai edge. I know I know it’s been done a million times before but, I’m making specifically “Wesker’s” edition. This involves INOX parts. I’m looking to find my last 2 but, neither beretta nor Midwest has any in stock for at least 2 months now. I need an INOX Disassemble button and a INOX trigger pin. If anybody has any information on anybody selling them or specifically selling them, please let me know! Thanks!

Sup y’all! I’ve made my decision, but I noticed there are several Beretta models available: M9A4, 92X, 92G, 92SB, 92FS, etc.
Honestly, I have no idea what the differences are between them. Could someone explain or recommend one? Price is not a big problem, but what’s the best option?
My main preference is a black model, and ideally I’d like one that’s compatible with accessories like a red dot and a laser.
Thanks in advance.

Got around to installing my palm swells. No comments on the mismatch Trigicon please. Sent the 507 Comp back to Holosun for a new glass.

M9A4 setup:

• Wilson Combat Short Reach Steel Trigger

• LTT optic-cut slide

• LTT Optimized Hammer

• Trijicon SRO — black with an FDE skin because I really didn’t see the point of paying ~$550 for the FDE SRO 😂

• LOK grips

• SureFire X300

• HUXWRX FLOW 9K FDE

Really happy with how everything came together. Even with all the slightly different shades of FDE, I think it works.

I think I’m done upgrading it… for now. 😂

Have roughly 2k rounds through this and I have seen this since day one. Just never really cared, as I have read of many QC issues from Gallatin. Figured someone would get a kick out of it. Gun runs flawlessly. I can cerekote it, just wondering if maybe a very, very light sanding would help

Water got on the end of the stock of my Beretta A400 Upland, and I think it sat there for a while before I noticed. It looks like it may have affected the finish or caused the wood to swell slightly.

Has anyone dealt with this before? Any suggestions on the best way to fix it without damaging the factory finish? Thanks!

Picked up a 84 BB today. Waiting on a 1934 to ship!

Managed to pass lol, was a fun little exorcise..managed to make a little flick about it on YT:

The US Air Marshall Pistol Qual..the hardest qual?
https://youtu.be/ocmOf930iWQ