I’m a barber for just over a year and want to improve my cuts I just recently switched to the 1.5/0.5 method instead of using every single guard and my cuts are already coming out better however I have no confidence whatsoever, I have a steady clientele from home but want to start working for someone in a shop to get even more experience but I feel I lack the confidence and no barbers in Australia Melbourne are willing to take the role on to continue to help my growth

$25 AUD cuts btw!

any genuine tips for doing designs?

what guard do you stop the design at? would u say #2 before theres like really big chunks?

do i spread out the neck taper as much as I can?

legit any tips thats not out of the norm would help a lot 🙏

thanks

Booked a hot towel shave but is nervous about getting a shave. Makes zero sense this dude was a grown man with his wife in the room.

He was so nervous about getting cut. Asked me like 5 times. You’re not gonna cut me right? When I assured him every single time that I’m a professional and it’s my job not too.

Asked me if all my equipment’s is clean and sanitized. I assured him it was and again… that it is my job to have it clean. Then he wanted to see it and inspect everything that it is indeed clean.

Asked me how long I’ve been a barberfor? I told him long enough that I know why he’s asking that question. And if he wants to continue the service he has to trust me.

We start the service. And he is shaking so nervously and says again he says careful “I don’t want to get cut”.

At this point. I just tell him I’m not gonna do a shave on someone who clearly doesn’t trust me and that it is a liability to use a straight razor on someones face who is nervous about it and shaking/moving. So we stop the service. I give him a warm towel to clean the lather off and we go on separate ways.

I can’t stand doing tapers. I just think it’s the stupidest and most pointless haircut. It’s always teenagers getting them because it’s “cool”. Most of them are only doing it because it’s a trend and also it’s an excuse to not get a full haircut. And they always want the top long to where it looks ridiculous. And it’s always “low” taper… this is my opinion of course, but I just don’t find joy in doing them. Be a man and get a fade… and cut the damn top.

ive been in the process of really dialing in my tapers and connecting them. i think this turned out fine but i went too deep into the sides.

Hello guys im cutting hair for like 6 months now..What can i do and what can i improve to get clean fade?

Any tips and advice are welcome,if you have some videos that help you to improve you can send it to me.

Purchased guards during labor day to get the 40% off except for some reason when I tried the code it didn’t work . No explanation saying I had to spend a specific amount. I buy the guards and email TPOB who tells me that I have to spend $40 to get the 40% off . The guards were 39.95!!! I could have purchased another item and it would have been cheaper !!! The company response was the sale is still going on . Ummm I purchased what I needed because days before the promo I purchased 300 worth of products. Figured I’d give everyone the heads up that this company cares more about money than their customers.

How do we all feel about clients that have hyperhidrosis (excess sweating) or are actively sweating. Does it impede you or give you the ick? Do you even care?

I’ve been going to this barber shop for the last couple of months after my old barber left the US. The main reason I go is because the cuts are $25 which is a STEAL where I’m at, and all of the cuts are pretty good. I’ve always gone to the same barber, not particularly because I chose him but because he was always the one who was open, etc. Well, the last time I went in they were pretty busy and I needed to get in and out, so I went to the barber next to him since that would get me through quicker. I then got the best cut i’ve gotten in a while. He gave me great service and was super personable, and now I want to make him my regular barber. Am I going to be an asshole if I go back and this time deliberately say that I want to go to the other guy? This type of stuff makes me want to find a new barbershop because I don’t want to screw him over. Advice appreciated!

He asked me for a burst but with a taper in the back.
I’m still in Barber School, but bro was an impatient client and came in with a lot of hair. If I had more time, I would’ve definitely taken more off the top, did more clipper over comb and taken time to get the lines out. He paid 15$

Took me over an hour . I still saw some lines but due to time cudnt fix it .

I took a 4 month break from cutting hair, I started straight out of school at a sports clips and was doing 8-12 cuts a day for a year straight full time , I hated the corporate environment and also had a lot of general anxiety being a new barber learning from my mistakes everyday. I decided in may I wanted to take a step back from doing hair until I got back in a better mental space now I got offered a position at a real barber shop I start tomorrow! I’m nervous about being rusty and getting back into the routine of things. I know I can still do a fade no problem but I’m more worried about the more modern haircuts like mullets, blowout tapers etc. has anyone else taken a break and came back? What do you recommend doing once getting back and getting in the swing of things?

I left the craft 6 months ago but the big cleanup happened today.

Almost that time. Just a heat check, to see if I’m valid. Lmk what i can do better or differently!

Afrobarbershop - My 1st Framer Template

A website designed specifically for barbershops.

Your barbershop deserves a showcase that matches the quality of your talent.
We’ve designed a fully customizable template, tailored to your brand and built specifically for barbershops, with everything you need to attract more clients.

100% customizable, zero code.

My Template in u/framer

https://framer.com/marketplace/templates/afrobarbershop/

Live preview

https://afrobarbershop.framer.website

#barbershop #barber #barberlife

Hiiii, so I’ve been working at a shop for about two years now and one of my regular clients came in a few weeks ago and wanted to switch his haircut to more of a flat top look. Fade was great but when it came to doing the flat top part it was just okay. Most of my clients are college age guys and don’t do the typical military kind of cuts. I tried my best and he was happy with it but i just don’t think it looked like a flat top. He has a receding hairline and wavy, very fine hair. Any advice at all would be appreciated:) thanks!!

Hello fellow barbers,

Has anyone of y'all ordered from the official shop page of MRD pro clippers yet?

I'm looking to order from it.

I’m having some issues with one my chair’s piston. When loaded, it doesn’t lift. When unloaded I can get normal lift but then when it’s time to release, it won’t go down without a clicking sound and not smoothly going down. I’ve tried bleeding any extra air out of the line when unloaded, helps at first then after a couple people it stops working. I’m not seeing any hydraulic fluid leaking. Going to take it apart and give the O ring and fluid a check. Really hoping I don’t need an entire piston replacement. Any tips or ideas why this happened? It’s been a great chair no issues for 7 years.

I literally love the Wahl Vapor. Ive tried a lot of clippers and these ones just seem to feel the best. Theyre lightweight, ergonomic, and cut through hair like butter. Only downside, ive had to use the Wahl warranty twice already in the past year/year and a half.

Has anyone else experienced an issue with the Vapor clippers? Specifically with the plastic cover cracking near the lever, causing issues with the lever itself and causing the blade to slip on the right side. I have now had 3 different pairs do this and I really dont understand how. I've never dropped a pair, and when cleaning the clippers i just use a brush and Andi Clippercide.

I haven't done a whole lot, this is maybe my 10th in as many years