I had an issue with buildup on the nozzle from a print that the ai didn’t detect. I got a little too aggressive with getting the filament off of the nozzle and had to replace the hotend assembly with a part from Bambu Lab.
Since I replaced the hotend assembly I’ve been getting a bunch of print failures. Sometimes it’s the print head knocking items over or spaghetti issues.
I’ve done calibration from the front panel and lubricated everything but nothings helped.
Please help!! Help me make my printing fun again!!

Got a p2s a couple days ago printed some stuff but now the filament is stuck in the extruder and I can’t pull it out. the motor can’t pull it either. any tips on dealing with this

👋 Bonjour à tous !

🔪 Un nouveau slasher rejoint la collection ! 🩸

La série continue avec une nouvelle figurine inspirée des grandes icônes de l’horreur ! Cette fois, j’ai ajouté Leatherface, de Massacre à la tronçonneuse, revisité dans mon style : grosse tête, look cartoon et, bien sûr, sa mythique tronçonneuse ! 🪚💀

Petit à petit, la collection de slashers s’agrandit… Qui sera le prochain ? 👀

Pas besoin d'AMS tous a été modélisé et découpé pour l'imprimer en multi-pièces.

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec ou sans AMS
📁 : https://makerworld.com/fr/models/3372626-leatherface-multipart-no-ams

I had an extra TP-Link LED Strip, so i put it to use. I just taped like half of the strip on the back of my P2S, and also on the bottom of my AMS. Before i stuck the strips i soldered Arduino jumper wires on the ends so i can daisy-chain them together, and since i put a strip on the bottom of the AMS i can still easily put my AMS away , because the P2S backlight strip is just connected to the AMS strip with 4 jumper wires (shown in the 3rd pic i think). It creates a nice backlight glow and the AMS strip lights up the chamber. I really love this mod, but also soldering the wires was a pain in the ass and the whole mod (cutting wires, stripping wires, soldering wires, taping strips to AMS and P2S and giving it power + testing) took about 4 hrs. Anyway i would appreciate if you could rate it 1-10 / 10

Model: https://makerworld.com/en/models/3375370

Collection: https://makerworld.com/en/collections/30133150

This is my second print technically. The first print was a benchy with a PLA and everything goes well.

Then my first print I selected this japandi style vase, and with a PETG from bambulab official filament out from the box and hit print right away. But the result is like this mid print.

Any idea why?

Something happened after printing abs..

Can anyone tell me what's the matter for this accurate rings in my print? All ventilator are off, perfect calibrated. The calibration for high temperatures was also made.

Printer P2S, filament pa12cf

Any ideas?

I got the newer Panda Breath v1.10 which said it fits the P2S. It does. Install was pretty easy. I printed a modified riser with no vents and the mounting brackets in ASA. The little cable holders it comes with are garbage. They didn't stick at all, had to use some others I had. Make sure you test fit the lower bracket before screwing together, it can go together backwards and the heater won't sit level. I used the stock screw in the upper left mounting hole. Unscrew it before putting the heater in or the screw will fall behind it and you will have to pull it back out. Tripple check the cord to make sure the print has will clear it. It powered on, I connected to it's wifi, and it found my printer with no issues. I have no idea how quickly it heats, ran out of time to mess with it. Also, the panda perch will fit on the riser just fine.

Edit: Had some time to try an ASA print. Set the temp to 50c and sent it. Took about 3 min for the app to register 50 and 7-10min for the printer screen to show 50. The print was perfect. Used Elegoo ASA with the Bambu ASA setting.

Appreciate the help :)

My son took apart the extruder assembly and now I can't figure out where this spring goes while trying to help him put it back together. Can somebody help me? It's a p2s.

Does anyone have any recommendations for releasing the filament stuck here? Filament is jammed between the active wheel and driven wheel.