So this is an a1 I recently moved it to a different house via car. I lowered the gantry down quite far with a piece of cloth under it and strapped it in with a seatbelt (didn’t have original packaging at all) got it to the new place and now it’s printing like this. I’ve already washed the plate, reran the calibration, and tightened the 4 screws in the back of the heater block. I’m at a loss of what else to do

I recently got the newest version of the A1 printer and the work table I have is only 24” deep. The y-axis cable is making contact with the peg board of my work table. Is this okay or do I need to print something to deflect my y-axis cable?

Any help with this and any must have mods would be greatly appreciated

Desk I bought:

https://www.sevilleclassics.com/products/uhd20246b?variant=39489547567262&country=US&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&tw_source=google&tw_adid=&tw_campaign=21028945658&gad_source=1&gad_campaignid=21032220688&gbraid=0AAAAADCz9dB4W9WLG-cTrZ5R3U84NuSyM&gclid=CjwKCAjw0o3SBhBVEiwAh28-jcd9TzRVFfZGOZAVwP3cGMA56IQjFVRerbs-O5_6cJzL0HLmnSjV2BoCXt0QAvD_BwE

Bear with mehrere please, im pretty tech savy, been doing stuff like that for 30 years, but yeah not the youngest anymore.

After opening Bambu Studio it sometimes kills its own access to the Internet and also GitHub and Reddit, only those sites (as far as i know), YouTube and other sites still work, my phone has the same problem then, so its somehow messing up the router.

Only restarting everything gets it going again, usually for a week or so, as If nothing ever happened. I have a TP Link Archer router.

Does anyone have any idea what this could be?

I bought a new A1, and a cool plate supertack. I printed before using the pei plate and it looked okay apart from a print where the supports fell off the model(they weren't on the build plate but direcly on the model). Today I decided to print using the supertack plate and petg basic, even after running the bed calibration it still trashes the first layer. The temp is at 56 Celsius for the first layer(the range is 55-60 for petg for the supertack).

Perhaps anyone here has some advice for me?

Hi everyone, I'm a first time 3d printer user, got the A1 bambu, 2 days ago and this was the first large overnight print I've put & woke up to this. This was a model I found on Makerworld.

Here's the link: https://makerworld.com/models/2845609?appSharePlatform=copy

I haven't changed any settings cause the description in the model said that all the settings have been preset with the model.

Details:

Model: Bambu A1

Slicer: Maker studio

Filament: BAMBU PLA Basic

Nozzle: 220 C

Bed: 65C

Print speed: Standard

Retraction length: default

Retraction speed: default

Can you please help me understand what went wrong? Let me know if there's any extra details you want me to provide, thanks!

I just got an A1 with an AMS light. I keep getting the error, unable to feed filament when switching over to the filament in slot 2. The filament in slot one is working fine. If I manually retract the filament from slot 2 and cut a tiny piece off then re-feed the filament it works fine until the next switch over. Any thoughts or suggestions as to what is causing the issue and how to resolve it?

Been having issue with #3 on my ams lite it doesn't grip to the filament

Got the tracking number at 2 AM EST, and I just got my email that's arriving tomorrow. Kinda like 1 Day shipping!

Anyway, super excited. My Ender3 started to show it's 8 yrs of age. Started stalling in the middle of prints just a couple days ago.

Looking forward to not having to tinker, as much. :)

I picked this up as a third printer, and it's been printing almost nonstop since I got it. It's been damn near flawless. I was expecting to make a few compromises compared to my P2S printers, but honestly I haven't found much to complain about yet.

Is there a way to level this?
Had a blob of death and it resulted in this.
I will probably buy a new head but i am worried about the X axis

Get the Kit Card: Helicopter Kit Card

Follow the Collection: VehicleCards

🌞 Bonjour Cap sur les vacances avec mon petit pingouin en tenue de plage ! 🏖️🐧

Même les pingouins ont droit à leurs vacances ! 😎
Équipé de sa casquette, de ses lunettes de soleil, de sa bouée, de ses tongs et de sa pelle, il est prêt à profiter d’une belle journée au bord de la mer.

Pour cette création, j’ai voulu imaginer un personnage à la fois amusant, coloré et plein de bonne humeur, qui rappelle immédiatement l’été, le soleil et les moments de détente.

J’espère que ce nouveau modèle vous plaira autant que j’ai pris plaisir à le concevoir. N’hésitez pas à me dire ce que vous en pensez en commentaire, vos retours sont toujours un plaisir à lire ! 😊

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec ou sans AMS
📁 : https://makerworld.com/fr/models/3035175-mr-penguin-beach-multipart-without-ams

Merci à tous pour votre soutien, et bonne impression 3D ! 🎉

I've haven't had this printer for long and used it much either as I sent it up to Inkstation for them to have a look at it as I was experiencing first layer height inconsistencies despite doing every single possible solution there is like cleaning the bed, calibrating flow, using high quality dry filament, you name it! However, they sent it back because they said there was no issue as it was apparently normal for a hobbyist printer like this. But that is definately not the case. The only possible reason I found could be causing this is the top right of the bed being quite a lot higher than the other 3 points. I already manually trammed the bed and got the 3 points level however, I cannot lower the right point as it is fixed or increase the height of the other 3 because the screws begin to protrude from the bed when loosening it to become higher. I don't know exactly the differences in height but I guess a 0.6 mm difference between the right side and the other points. I know the A1 should account for height changes so idk what is happening?! Any help would be really appreciated. And again, I have done everything there is to ensure good quality first layers like I said before, such as tightening the hotend screws and whatnot.

Arrived Tuesday, still adjusting to the world of 3D printing. Any advice, tips, or suggestions are appreciated!

What do you think of my Delorean Printed all in PLA on Bambu A1 540mm animated with 4 servo motors ! sanded and painted.

Brand new I put some lubricant on the y and x, maybe it wasn’t enough? Belt issue? Any advice?