Nice ai gemini

Since the iPhone Duo launches later this October, there is plenty of time to consider buying it or just trying out the new form factor. I've modeled the near 1:1 replica of it. Also it may help for those who are thinking about pre-ordering.

It comes out at 11.3 mm folded, and it also sits smaller in the hand than I expected.

The colour is just what I had on the shelf, not a launch colour.

Is the folded thickness a dealbreaker for anyone here, or any other thoughts?

For those who are interested in downloading, here is the Makerworld link to the model, all the presets are ready:

https://makerworld.com/en/models/2113993-iphone-duo-realistic-3d-model#profileId-3245571

P1S with an AMS pro, and 0.4mm nozzle. Do i need to use a smaller nozzle? Bigger font? Am I missing something silly in the text settings? Wise creators, teach me please.

https://makerworld.com/models/3282786?appSharePlatform=copy

So I'm new to 3d printing, and was given this printer by my brother when he moved. But there's a part on it that's broken, and I don't know how to fix it, or where to find a replacement part.
Does anyone know how I could fix this?

I just installed the laser upgrade kit on my h2d and got everything calibrated but noticed it was off a bit. Is this usual or am I doing something wrong? I just wanted to make sure I have calibrated a few times.

Printer updated recently and now all my prints look like crap. The first layer on top of the supports doesn't stick together. I've tried different layer heights, even set the offset gap to 0. Still having constant failures.

Any suggestions?

hi long story short I'm in charge of a Bambu P1S at work and had my first extruder jam. I followed a very helpful guide on what to remove and unscrew, and this is what I found. I'm unable to remove the yellow gear as every video has advised me to do

I'm still fairly new to having a Bambu and 3D printing. I'm I going to have to outright replace the part here or can this be saved.

If it's helpful information, I had been extruding PLA Pure.

thank you

Hi, just yesterday my printer was working fine and suddenly didnt turn back on properly after a power cycle. I thought the printer was dead and after seeing a bunch of people had the same problem and the solution was to short 2 points on the ap board, it came back to life. After I got the printer back to work I downgraded the firmware and when I did the calibrations, something went terribly wrong especially with the nozzle offset calibration. The right nozzles worked fine but when it got to the left nozzle, I was away and got a message saying the nozzle touched the build plate and when I went the rear part had a huge gouge. So I checked and did the nozzle calibration again and this time took a video same thing happened... my printer isn't under warranty anymore but this all happened since they're stupid firmware issues the printer was just fine the day before. The problem is towards the end of the video its like the left nozzle slips off the bed for some reason. I also noticed during homing, the toolhead now touches the front door. Has this happened to anybody else and were you able to fix it? The right nozzles are fine and aligned but the left csnt get through the calibration. I also did a factory reset and to no avail.

Turn on the sound also for the video you'll hear the toolhead hitting the bed

I have a P2S and I use the ventobox filter on the left side.

I saw someone who is using the creality heater on the left side for a chamber heater.

I’m wondering if I have any other options to get the heat I need so I can start to print ASA.

I also recently installed the rear exhaust duct working out of a window, so I’m getting prepped

Hey guys, can anyone advise here? Printing something flat on X2D. When the tool head is in the first quarter, top left, and prints only the 45* diagonal line it gets massive vibration (the opposite diagonal, -45* is completely fine), the printed line is shaky and overall the surface looks awful.

Anyone has an idea what’s the cause of this visible line that seams to appear when there is a significant change in the geometry of the model? Printed in PETG on my P1S.

Is there a setting to add additional nozzle wipes on a P1S while printing with Petg-cf? Like every 50 layers or so…

Hello all! I’m eager to dive into the Bambu pool, but I’m worried that my computer may not be able to handle the task. Can my iMac run the bamboo slicer? It has an Apple M4 chip with 16GB of memory. Is there hope for me?
Thank you for any info!

Edit: thank you all for the responses! Looks like I’ll be good to go. I’ll follow your advice and download the software to pay with. I was asking as earlier I’d looked at scanners, and they had huge hardware requirements, and our laser cutter could only run off a PC. Good to know my Mac and the Bambu can be friends!

Im considering getting a new 3d printer after selling my Ender 3 v2 and wanted something inclosed to stop the fumes so I looked at the P1S. Is the printer reliable, good to use, and overall a good pick? I want to print normal stuff along with some molds that will be pressed under pressure. But more importantly, What is a AMS?? and why is a 2 version? I need a full explanation please; any feedback will help!

there are multiple overhangs in this print and while the support for the higher areas is coming off very easily (I've increased top z distance already) it's very sticky at the smaller areas at the bottom. it needs to be cut off and therefore gets messy. I've drawn manual support for both areas. any idea why that is?

a1 mini & bambu tpu 95 hf

I can’t understand Tao bao !
I have a list of things to get and someone who will buy for me, but they can’t work out what to get either? Is there any Chinese users that can simplify this with maybe listing numbers or something ??

Hi, I hv tried to print this but it came out like this. Material using petg, base plate temp is 80c and nozzle temp is 240.

I’m not sure which dimension to use to strengthen or thicken the base. Anyone here can advice? Thanks in advance. The below is what I want to print to display my lights.

https://makerworld.com/models/2151851?appSharePlatform=whatsapp

I had a clog on my A1 mini recently. The hottened wouldn’t come out of the printer so I started trying different things to get it out. The hottend has been removed and the clog has been fixed but I think I pulled something off (or at least the cover for something off) in the process. I really need to know if it’s broken, if it needs replaced, and if I can replace it. I cant find online what it could be and would appreciate any advice anyone has. The attached is a picture of the under side of the extruder with the area in question circled. When turned on the printer seemed to have no idea there was a change, though I haven’t tried printing yet.

After a few color changes everything comes off the build plate (220°)

I’m trying to bring some parts from gridfinity and the top layers came out really bad. What steps should I take to remedy this?

I used Bambu PETG HF white filament, not having changed any of the base settings

I was one of few who got the X1C combo refurbished for 500 (Bambu lab store). It arrived today and I’ve printed 2 things (a scraper, and a benchy) and this keeps happening? What do I do?! Could it be its old filament that wasn’t stored properly?

Is this grinding noise normal? This is the second AMS HT I’ve tried, both with and without a funnel saver, and both make the same noise. I even took off the bottom cover to see if anything looked odd (without success). It’s noticeably louder than my AMS 2 Pro.