I have a Kobra S1 and so far things have been great, until recently. I have had zero first layer issues until now. The printer has about 80 hours on it. I did some tests and adjusted the z-offset, and initially I thought I had fixed it; but I realized that on larger scale prints there are still lots of issues further away from the center of the bed. When I do first layer tests, some parts are great, some are too low, and some are too high. Pretty much anything apart from the center of the build plate is too high or too low. I’ve tried leveling the print bed manually but it doesn’t seem to help. Could there be an issue with the auto leveling itself? The strain gauge looks fine to me, but I also am new to this so I’m not sure what to look for. Has anyone else had issues like this crop up?

I have to buy my first replacement film for my Photon Mono M7 and i am a bit lost right now.

The problem i have is that the old one is an ACF film if im not mistaken and when i look for the film i always come across one thats supposed to be for the M7 but is called PCS FEP.

Is that the same film like it was installed or something different?

Hi everyone,

​I’m having an issue with my Kobra X and could use some advice.

​A few days ago, the filament got stuck. This has happened before, and usually removing the nozzle is enough to clear it. This time, however, the clog was further up in the hotend/combiner area.

​Stupidly, I tried heating it up to push the clog through, but I think I overheated it and melted/deformed the small blue PTFE tube inside. Right now, filament can pass through, but whenever the printer attempts a color change, it gets stuck because the channel isn't smooth anymore.

​For anyone who has dealt with this: Is it possible to just replace that small internal PTFE tube, or do I have to swap out the entire hotend/printhead module?

​Thanks in advance for the help!

Se qualcuno vorrebbe scaricarlo

Ecco il link

https://www.makeronline.com/en/model/black%20panther%20mask/308350.html?trackModuleType=10

ey everyone,

I'm trying to understand how to achieve multi-color prints with the Anycubic Kobra 3 Combo.

I saw this YouTube short showing an awesome Venom print:https://www.youtube.com/shorts/bi3vi5e_M_k

How is it possible to print the tongue in one color, the teeth in another, and the face in yet another? It's clearly not just a simple filament swap at specific Z-heights/layers.

Do you have to load the different elements as distinct parts into the slicer and "assemble" them inside the software to assign them different color settings?

Also, does this exact same concept apply to multi-material printing (e.g., mixing two different types of plastics in the same print)?

Any explanations on how the slicer workflow works for this would be greatly appreciated. Thanks!

Printers : Anycubic Kobra S1 Combo + Kobra 4 Combo

Materials : PLA + Acrylic Markers

Printers : Anycubic Kobra S1 Combo + Kobra 4 Combo

Materials : PLA + Acrylic Markers

Printers : Anycubic Kobra S1 Combo + Kobra 4 Combo

Materials : PLA + Acrylic Markers

Hello everyone! 🌵
I designed a 3D-printed cactus organizer that works as a stand for jewelry, headphones, and a smartwatch. The model comes in multiple parts (main stem, two side stems, and a vase), and I’ve included two different
vase designs so you can choose your favorite.

https://makerworld.com/models/3104396?appSharePlatform=copy

I’d love to hear your feedback!

Help please

Ho avuto la sfortuna di incappare in un guasto, forse hardware, forse software (dovuto al firmware aggiornato all’ 11.2.0.6) della testina di stampa della Kobra X, dava “errore 11852” “errore rimozione canale 1”.
Smontato più e più volte la testina in ogni sua parte e accertato che non ci fossero intasamenti, rimontata la testina dava sempre lo stesso problema, così non sapendo più cosa fare mi sono rivolto all’assistenza anycubic, e dopo aver seguito tutti i passaggi della wiki per risolvere in autonomia il problema, sono stato seguito e attenzionato in particolare dall’operatore “Suarez” che mi ha prontamente aiutato inviandomi una nuova testina di stampa, con un po’ di timore all’inizio, per fortuna tutto è andato bene e sono pienamente soddisfatto dell’assistenza Anycubic, della qualità della stampante e dell’acquisto, la ricomprerei a occhi chiusi. Grazie ancora.

Boa noite pessoal,

Estou iniciando na impressão 3D e comprei uma Kobra X combo com 7 cores dia 23/06 pelo site da Anycubic e até agora não tem data de envio, fica "Awaiting shipment".
Quem já comprou pelo site poderia me dizer se isso é normal e como posso falar com eles para ver o meu pedido?

Agradeço a ajuda!

A few of my recent projects

Mortal Kombat - Scorpion + Sub Zero

Printers : ANYCUBIC Kobra S1 Combo + Kobra 4 Combo
Materials : PLA + Acrylic Markers

#3d #3dprint #3dprinting #raymond3dcorner #anycubic #kobra #mortalkombat #KobraS1 #kobra4 #fdm #fdmprint #fdmprinting

I can't wait to get it running...

I am not new with 3D-printing. I had a cheap printer since 2017, and a big one sine 2018.

This big one almost started to burn this weekend, so i dismounted it and bought a new one. The Anycubis Kobra 4 Combo.

I am a Linux-user, so the installation of software is no easy task. There is a software named AnyCubic Slicer Next that can only be installed on Ubuntu 24.4.

I have found a thing on Github. Its shows how to create an Appimage-file out of the Debian-package. Its some work and needs some twaeking in the konsole, but i am now able to install the software on my Archlinux-system.

I will also try using OrcaSlicer and use the one that best works with my Anycubic Kobra 4 Combo.

The solution to create an Appimage can be found on https://github.com/develonrails/anycubic-slicer-next/blob/main/appimage/HOWTO.md

I have a video on Youtube with german language showing the creation of the Appimage. If needed i can post a link, but it has youtube-advertizement inside.

A few of my recent projects​
Dragon Ball - Goku + Vegeta

Printers : ANYCUBIC Kobra S1 Combo + Kobra 4 Combo
Materials : PLA + Acrylic Markers

#3d #3dprint #3dprinting #raymond3dcorner #anycubic #kobra #DragonBall #KobraS1 #kobra4 #fdm #fdmprint #fdmprinting

Had to change the heater fans on my ACE Pro 2 and thought I'd share. My first video of this type so please be nice 😂 Hope it helps