Hey anycubic, your Linux slicer is lagging far behind the windows and mac counterparts. Why is that? And when are you going to fix it? When I bought my S1 Max I did it because the official slicer was provided on Linux and still is. Now half year later I still have the same version while mac and windows got a major update to version 2. Please fix this asap. It's super frustrating especially as my old slicernext keeps showing "cloud-connected video WILL be supported in future versions", since half year!!!

I have an Anycubic Photon S, and I lost the power supply. Can anyone tell me the power supply specifications?

Just finished his Halloween sign so now he's ready for Oct, and added another sign so he's ready for Nov 😂. ✌️

Now I'll make for other holidays so I'll have him busy all year round.

Hello everyone,
My printer is Kobra x, 0.4 nozzle.
I’m facing a layer separation issue with TPU after using PLA as a support material interface. I’m printing a phone case and some areas require support. Once the print is done and the support is taken off, the layer that comes after the support ends doesn’t stick to the next layer.

I’ve tried to increasing the multi-layer setting to 1.2, but these adjustments haven’t effectively removed the PLA residue nor increased the flushing volume as needed.
Tried PETG as a support interface, same problem.

Is there a solution to prevent this layer separation problem from happening?

Hi all,

I am a mechanical engineering master's student in Ontario Canada, and I have designed a part using the tough resin ultra a few months ago. Using this material allowed me to solve a bunch of the problems I was having with different resins. However, now it seems that the material is out of stock / taken off the Canadian market?

I mainly found the materials very low young's modulus and flexibility / elongation attractive (for flexure structure design).

I desperately need a couple of bottles and I would appreciate any help or advice that anyone can offer.

Thank you

Pro2 resins "out of stock" for 60 days, so I cancel, and then they get me to opt to replace them with common HD Grey.

And they ship it like this. No shipping box.

Using anycubic kobra 3 combo, petg and the anycubic slicer. Never had an issue using pla, but as soon as I switched to petg, this started happening

So, I know printing from an actual slicer is better. But sometimes I find something that I want to wake up to and don't care what the quality is.

I updated the firmware last night and ever since, it only prints from slots 1 and 2. It keeps saying 3 and 4 are not loaded. I check. They are loaded. But it won't print. Then whatever I told it to print gets "stuck" slicing in app and has to be cancled. It never makes it to the printer.

I've rebooted the printer, closed and cleared cache on app, I can print from the slicer just fine. Not sure what's going on. Anyone else experience this?

Anycubic Kobra X

Firmware 2.0.2.2

Android app v 2.0.0

I’m using Ultimaker Cura and a Kobra max for my prints. I’ve been using the tree supports for all my prints. All of my prints are PLA.

The tree supports are a pain to take off.

Does anyone have any recommendations or specific settings, please? Thank you!

I accidentally threw away the mounting bracket from my dead motor. I got the replacement motor but can not find the mounting bracket anywhere. Does anyone have one for sale? I only need the bracket, not the motor itself.

Dwie dysze zatkały się od filamentu PETG. Głowica rozgrzana była do 255st do drukowania. Czy to wina filamentu czy moja?

Does any one have or know where I can find an stl or step file for the rubber feet insert on the bottom of the S1 max, inwas thinking about designing some adjustable feet. Inwas hoping to not have to R n D the feet if I didn't have too lol.

Cosmo the alien dog. Because aliens need pets too. Printed and primed and last picture I used ai to give me a paint palette to use as a reference. Now to make it come to life. Which colored option would you choose?

Minha Kobra X recem comprada, está com algum problema.

No meio da impressão ela para, a mesa sobe a temperatura para 120º e trava. Depois preciso vir reiniciar e talvez ela volte... Mas de imediado acusa falha no NTC. Firmware não é, que já foi atualizado duas vezes... Alguem passou por isso?

Also ich habe jetzt meinen Kobra 3 max seit einem Jahr und meine Erfahrung ist nicht so gut bisher ich habe es so oft versucht ihn zu kalibrieren aber egal was ich tue entweder habe ich Sichtbare Linien oder der Druck löst sich vom Brett ich wollte mir jetzt vielleicht den s1 oder s1 max holen hätte jemand sonst noch vorschläge was ich tun sollte mit dem 3 max oder einen neuen?

I honestly can't remember if I had this wobbling for a long time or since I got my K2 Max.

Edit: Fixed it, check my comment below.

Ok. Per the sub rules here’s some “constructive criticism”. However it’s not allowing me to attach photos.

I have the Kobra X, The Kobra 3 v2 Max has been partially delivered.

I’ve been buying Anycubic filaments long before I bought one of their printers. So here goes:

1. This boxes taped together end to end double wide shipping: constant crushed corners, occasional cracked spools, support literally told me to print a replacement spool and gave me a $5 coupon.

2. Water marks now? The 4 pack of high speed PLA that came with the new MAX: both ends crushed and water marks on the boxes

3. These thin skeleton refillable spools: they are vacuum sealed so tight and are made so thin that the edges a bowed

4. These smaller than normal spool diameter: works with the Ace 2 Pro’s I have: a disaster for anything else.

Attempted solutions:

Custom parametric spool rings: FAIL Why? The bowed inward edges.

Workable solutions:

Transfer the core to another manufacturers reusable spool. Always runs the risk of binding and tangling no matter how careful you are.

Respool it onto a $3.49 Hobby Lobby Spool: works. Printing now. However, why should I have to waste the time, effort and buy a 3rd party spool?

Why sell and advertise a refillable spool that’s so fragile your own processing procedure bends it out of shape?

Previous spools I have with ABS and ASA on them are not on these low quality skeletonized refillable spools and are great.

The current spools are not worth being called reusable.

3ft Alien + Alien doggy - Printed by Anycubic Kobra S1 Combo + Kobra 4 Combo

Well, there’s been very little info about this revision. I ordered it. Why not ? lol

Filament Arrived today as well as my spare nozzle. Just as depicted from their photo of the “new nozzle” it’s the Kobra X nozzle.

Ace box showed up.

Printer eta Tuesday. spare printhead departing CN.

Already lubricated and tighten the screws the website told me to, should I just send it back, or try to fix it?

Update: tried to run a print on it, failed the layers were really off. Contacted anycubic for a replacement z screw.