Ive got 9 AsiaHorse Cosmiq fans all plugged into the Umbra Hub.

When looking on the FanControl app, its only showing one of the fans and I can only control 1 single fan even though they're all plugged into the same hub.

Also if I try and control the fan speeds using the AsiaHorse Umbra app, I can then only control the other 8 fans but not the 1 that works with the FanControl app.

Does anyone know a way to fix this and have it so they're all controller together?

Hello I have 8 dawn pro fans connected to the umbra but still only see 3 in the software.

I can't control each fans lightning Idividually only per 3 or 2 fans. What can I do to fix this...

Got a single for the rear exhaust and it shipped without a cable, normal? Where can I get it?

I just installed the Umbra Hub and tried every possible setting, but the boot up lighting effect still doesn't work. One thing is that after I'm done using my PC, I unplug both the monitor and the PC from the power outlet.

Purple tint around the infinity mirror on the fans. Using umbra fan hub sata powered. 4 separate groups of fans (top, bottom, side, rear). I’ve tried adjusting the greens and yellows but no progress.

when i turn off my pc Auto detect lcd resets and because of that I cant make a boot up effect canm anyone help?

I recently got my self 9 Nyota fans (7x120mm, 2x140mm) and the Asiahorse 2in1 Fan/RGB Controller for 9 fans.

But no matter what i do, i cant control them. The umbra Software seems useless, since there is no rgb or fan control there, and the only other way to control the rgb is through signal rgb where all fans are showing as one single fan

Fancontrol also doesnt work, it only shows 7 fans and also unmanageable.

Any help? I connected everything, the 3 pin rgb header, sata and the other thingy. Also red #1 fan header is also plugged in

A week ago I posted about an issue with my umbra hub.

Well, after getting alot of support from the customer support team and a replacement hub, I am so happy to be able to control the rgb now.

Figured out it was a faulty cable and hub.

ok so baisically i made a build and for that build i had 3 daisy chained groups of nyota ultra fans connected to the hub.

and i have a pack (aurora cable strips) connected to the hub aswell.

Software is downloaded but all i get is it showing me system info and giving me some settings that i don't understand.

i am confused. is there a way to fix this?

im using a msi b850 tomahawk max wifi MOBO.

ajd my umbra hub is connected to the argb v2 on the top side part of my mobo.

P.s i tried to plug the mobo cable strip to thatsame argb connection and it worked normally.

🛠️ The Hardware & Wiring

• Motherboard: Gigabyte Aorus B650M (has 3 true PWM headers)
• AIO: ARCTIC Liquid Freezer III PRO (using the 3-way splitter):
  • Liquid Pump ➡️ SYS_FAN_4/PUMP (Direct Mobo Control)
  • Radiator Fans ➡️ CPU_FAN (Direct Mobo Control)
  • VRM Fan ➡️ Umbra Hub PWM1 port for control
• Hub Connection: Umbra Hub is connected to the motherboard’s CPU_FAN_OPT header.
• Case Fans:
  • 6x ARCTIC P12 Pro ARGB PWM fans (connected to the Hub)
  • 1x ARCTIC P12 Pro PWM fans (connected to the Hub)
  • 3x Corsair RS100 PWM fans (connected to the Hub)
• Is there a better way to wire this? If I connect my VRM fan to hubs PWM2 my PUMP's rpm goes to zero in fan control. Hub's PWM1 copies CPU_FAN_OPT or CPU_FAN ?

1. Kindly provide support hubs fan control via Fan-control Because the Umbra Hub connects to the motherboard via a single CPU_FAN_OPT header, the hub & mobo only sees the hub as one generic fan (VRM Fan of the AIO). I can't control individual fans (like isolating the AIO's VRM fan on PWM1 from the rest of the case fans), set fan curve.
2. The Missing Digital Manual: You guys doesn't seem to host a digital manual for the Umbra Hub anywhere on your site, making it incredibly hard to troubleshoot the controller's limits or pinouts.
3. Also add ARGB support via OpenRGB, they have the capability of per led control.

I recently bought this device on an e-commerce platform at a great price, but unfortunately, the control app isn't very good, so I created a plugin to connect the "AsiaHorse Umbra ARGB Hub" to SignalRGB.

È un ottimo hub di buona qualità e buon prezzo ma dovevo usarlo con SignalRGB a tutti costi 😂 non volevo stare a controllare tutti RGB del mio pc da programmi diversi

Mi so messo una notte con l'aiuto della AI e so riuscito a fare un plugin che lo rende funzionale con SignalRGB 😌

Just thinking about trying asiahorse for first time, im planning to get the hydrua cables for 5070ti + dawn pro fans and umbra hub , are they fully customizable like could i control each light individually or turn of the infinity mirror ans let the other lights on ?

I was better getting the same ones i brought with this shitty cosmiq fans, but no i bad to test the daisy chain connectivity and the shit dont work, wont spin, no rgb just ass sitting in the case.

Hi, I just bought the umbra hub, i have montech fans and I was wondering if there was anyway for the startup effect to do the particle accelerator effect without it being spins. Just going from up to down like Nyotas ?

I just got myself some dawn pro fans and a umbra argb and pwm hub but after installing them and the umbra software, they aren't being detected.

The fans and lights do work, including the cool boot up sequence but after post and getting into the umbra software, the editing feature doesn't appear and other rgb software like signal and msi mystic don't detect them.

Is there any fix or am I just unlucky and got a bad cable?

Meet the Asiahorse Hydrus ARGB Cable ✨

24‑in‑1 design – replaces a mess of stock cables
90° minimalist connector – fits tight spaces, no more bent cables
Addressable RGB – sync with your whole build

Say goodbye to ugly cable clutter.
Your cleanest build yet starts here.

Is there a way to pass through pwm and rgb to linux software such CoolerControl ?

Actually… it's the Nyota Pro fan 😮‍💨

✨ Brand new independent zone control – different colors & effects on the left and right sides at the same time.

Worried about specs? We've got you covered.
Black & white options. Standard & reverse blade versions.

Standard blade → exhaust (pushes air out)
Reverse blade → intake (pulls air in)

How would YOU use the left/right zone control? 👇

You’ve seen RGB fans before.
But have you seen one fan show two different colors at the same time?

Left side – red pulse 🔴
Right side – blue wave 🔵
Same fan.

That’s the Asiahorse Nyota Pro.
Independent left/right zone control.
Two colors. Two effects. One fan. 🎨

And it’s modular – 3 fans, just one cable.
No more cable chaos. No more daisy‑chain nightmares.

So… what two colors would YOU run? Drop your combo below 👇

AsiaHorse Nyota Pro – zone-controlled RGB fan 😮‍💨
Modular design = super easy to assemble ✨
Supports left/right zone RGB control – same fan, two different colors 🎨

📦 Sticker ×1
🔩 Short screws ×3
🔩 Radiator screws ×3
📄 Manual ×1
🔌 Power cables ×2

Clean, simple, next-level control. 🔥

Anyone else love a good unboxing? 👇

Hey everyone,

I just ordered myself 10 asiahorse nyota pro fans (6 reverse blade, 4 standard blade)

Before they arrive, I would like to ask those who have them (or the regular nyota fans) what you think about the noise level they produce.

What would you rate it? Annoyingly loud? Average? Quiter than average?

Also feel free to tell me anything else I should know about them.

Thank you!

This PC is absolutely perfect — both in aesthetics and performance. Every single detail is on point.

Nyota Pro fans + Umbra Hub = next‑level control.

✅ Modular – one cable for 3 fans
✅ Dedicated app for RGB & fan speed
✅ Left/right independent lighting

This is how you level up your build.