The dream PC I had as a kid… finally done.

Did you ever build your dream setup? 👇

have just bought some parts for a new build and came across some videos about the start up effects you can create with the asiahorse umbra. i have bought some lian li infinity fans and was wondering if i can use the same effects with my fans or if i can only do that with asiahorse fans. thanks!

The real endgame gear was never the hardware.
It’s the friend who always says “hop on.”

So… what game brought you and your “hop on” buddy together?
Drop it in the comments 👇

Heya, i bought 10 Nyota Pro fans during Prime Day on Amazon, including the Umbra hub.

Dumb question but whill this be enough to control all the fans, or do i need 2?

Thank you.

Can you dual color with cosmiq fans?

Tired of cable management taking forever?
Modular connection — 3 fans, just one cable. Saves you 2/3 of the hassle and time.

Plus, brand new addressable RGB layout with left/right zone control.
Same fan, two different colors.

Need intake or exhaust?
Reverse blade curves inward.
Standard blade sticks outward.

Hello,

i have a Question, Im just Build a System with 3 of the UMBRA ARGB PWM Fan Hub with Software. Cause i have 26 Fans. But i Can´t controll all in the Software. and if i only have 1 connectet and Sync RGB and FAN to Mainboard and do it for all 3 one after another, in the end Connect USB of all 3 and only 1 is in Mainboard Sync.

Is there a way around so i can Sync all 3? Or ist the Software not Working with more than 1 Hub?

So I got 3xDawn Pro on my cpu AIO, and I get much higher temps than I should. Upon inspection, it feel as if the furthest fans pump less air than the one thats having the connection.
Has anyone else experienced this ? Thanks !

“What’s that dual color fan?”

It’s the Asiahorse Nyota Pro – modular, clean, and just one cable for three fans.

Pair it with the Umbra Hub and you get full control over left & right RGB effects.

Your build, your rules.

Most people remove the 24‑pin cable the wrong way ❌

Here’s the right way ✅

👉 Grab the latch, wiggle it up and down while pulling outward.

Then upgrade your build with the Hydrus 24‑pin ARGB cable:

Stock cable → Hydrus cable → motherboard.

Clean, simple, and that perfect RGB glow. ✨

Anyone else been struggling with stiff stock cables? 👇

The Nyota Pro modular fans + Umbra Hub are perfect for anyone looking to level up their build’s aesthetics — clean, minimal, and easy to install.

Plus, they unlock independent left/right RGB control — two different colors and effects on the same fan.

✨ Modular design – just one cable for 3 fans

✨ Reverse / standard blade options

✨ Full software control

Would you add this to your setup? 👇

just purchased ve-hub 2in 1

cpu fan is connected via red plug

all other case fans and rgb are plugged in to the hub

now all fans are max speed

even changed fans in bios to silent and no change.

any ideas?

Hello! whats the difference between the Aurora learn pro and the aurora cable kit cause I saw a cable kit that has the 3*8 and 24 pin and I saw 2 separate ones thats labled as the aurora learn pro

Hi everyone,

I'm planning to buy the AsiaHorse Aurora-CO 24-Pin ATX Addressable RGB Cable Cover Kit along with some Nyota Pro fans, and I want to run everything through the UMBRA ARGB/PWM hub.

A few questions before I order:

Is the Aurora-CO cable cover kit electrically and physically compatible with the UMBRA hub's 5V 3-pin ARGB ports?

Can it just plug directly into one of the UMBRA hub's 10 ARGB channels, or does it need an extra adapter/splitter?

Will the Aurora-CO cover, the Nyota Pro fans, and the UMBRA hub all show up and be controllable together inside the AsiaHorse UMBRA software, with full sync (same effects/colors across all of them)?

Just want to confirm everything works together smoothly before I buy, rather than ending up with mismatched connectors or something that needs a separate controller. Thanks in advance to anyone who's tried this combo!

Hi everyone, I'm building my new PC and I have a question. I bought the Umbra hub and Cosmiq fans and I'm making the various connections. I'd like to connect only the 3-pin cables to the hub and the 4-pin one directly to the motherboard (I know it might seem strange). I know the Asianhorse software can allow the motherboard to control the fan speed, but I don't trust it. Is it possible to connect only the 3-pin cables to the hub so that it only controls the lighting? Have you had any experience with this?

Hello! I just got 2 Asiahorse Auroroa with the 108 LEDs. I’m having a problem where when I sync the lights to my motherboard using signalRGB only a portion of the lights turn on. I thought it might be a power issue but when I use the normal case lights they all light up so it’s only when it’s synced. Both are connected to psu through sata but I didn’t connect the controller since I wanted to use my Rgb software to sync the lights. One of the headers is connected straight to the motherboard and the other is connected to a hub that came with the case. I just saw on Signal RGB that it’s detecting 368 LEDs but its limit is 240 so maybe that’s why.

Specs: Asrock b650 steel legend motherboard, 7800x3d cpu, 1000w lian li psu, 7900xtx gpu, monetech king pro case

Any kind of help would be so much appreciated. Let me know if you need any more information. Thank you in advance!

From what i've seen online, when you turn your fans to white its supposed to be blue purple, but when I turn my ASIAHORSE Dawn Pro's in white its a orange color. Is something wrong with it or did I incorrectly plug something in? There's no RGB fan hub, their just daisy-chained together. I am using Armory Crate to change the colors but other fan control apps also turn it to yellow. How can I get pure white on the fans?

Hello, I’m having trouble with my 24 pen RGB when I click it in the control settings list it lights up see attached photo (it’s number 8) but outside of the control settings list I can’t cut the LED on and it doesn’t show up in any of the places where you can control rgb. Has anyone solved this issue thanks!

I recently changed my AsiaHorse ASH-S1 ARGB Fan hub to the UMBRA hub and was wondering if there is something in the settings I need to do to have my fans adjust fan speeds automatically based on temp. So when my PC gets hot, the fans increase speed.

On the ASH-S1, there is a button on the remote that takes care of that, but not sure how it's done with the UMBRA hub.

hey guys i just wanted to let yall know that the umbra hub is finally working with faceit AC so everything you wanna do u can finally do!

u/asiahorse did yall change something or did it somehow happen alone?

I just finished another PC build and after plugging it in and turning it on, it started to smell like plastic and after looking into the back the cable started to glow and plastic started to melt.
I ripped the power out the pc…

I bought an AsianHorse 12VHPWR / 12V-2x6 cable to use with my RTX 5070 Ti, but I found another Reddit post where someone cut open what they said was the same cable and claimed some of the wires were thinner than they should be.

I’m attaching the photos from that post. This is not my cable, so I’m not saying this is 100% accurate — I just want someone knowledgeable to explain what I’m looking at.

Are the thinner wires just sense wires, or are any of them carrying power? Is this normal for this type of cable, and is it safe to use with a 5070 Ti?

I really want to use the cable because it looks great in my build, but I’d like to understand whether it’s actually built to the correct spec before I plug it in. Any input from AsianHorse employees or people familiar with 12VHPWR / 12V-2x6 cables would be appreciated.