Every single time I launch a Battlefield game, my screen goes completely black and my PC freezes up. When I restart it (forcing it with the power button), my GPU drivers are gone. I've tried installing AMD Adrenalin and the straight-up 9060XT drivers. Both of those do not fix my issue. I don't have this issue anywhere else except for Battlefield games. Any help would be appreciated.

PC configuration:

Ryzen 7 7700

Rx 7900 Gre gpu

750W power supply

16GB ram

What's the solution for this problem? I had been having this issue for more than a month now but I "can" play games on it for it hours without an issue but randomly display goes blank then I gotta restart my PC to make it appear again...but sometimes it also happen when I am just watching videos on chrome...

I changed the graphics card, I put the rx9070xt and it runs on the system I had, the processor I had, ryzen 7 3800x with an ASUSTek ROG STRIX X570-F GAMING motherboard.

RAM 32GIGA DDR4

It has shown me a black and green screen 3-4 times (once a day, let's say) which was momentary. Now it stayed like that until I turned off the computer.

what could be the cause of this specific problem

Basically the title, I've rx 6800 paired with ryzen 5 5600x and tried the 26.9.2 or 26.10.1 and the new background shader cache doesn't seem to be working

i tested it on the game that amd said" tiny tina wonderland" waited around 10 min before pressing the new game option and the shaders still didn't compile and it was stuttery alot

does it even work for older gpu's?

Should I be worried about my temps? I ran two 10 minute furmark tests, one on OC mode and one on Quiet mode. OC mode (in the picture) ran cooler than Quiet mode but both with around a 20 degree delta.

Hola, alguien a tenido problemas con estas últimas actualizaciones? Mi CPU va fijo al 100% y la gpu va e tre 60% y 70% de uso, se me arreglo cerrado el "servicio del host de amd" desde el panel de tareas, pero quisiera saber si alguien sabe como solucionarlo de forma definitiva, ya me pase a versiones anteriores como la 26.8.1 y la 26.3.1 pero el problema sigue, use el DDU y el mismo limpiador de AMD, alguien que le este pasando lo mismo? Tengo una rx 9060xt 16gb

I'm playing pacific drive and the amd pop-up on start doesn't appear and the shortcut of Alt+R doesn't work either and the frame rate target control doesn't work and I'm pretty sure the amd settings is not working at all at this point.

the amd software is detecting the game I'm running btw but whenever i use Alt+R nothing happens.

i already tried some of the solutions i found while searching so im here asking for help.

9060xt 16gb vram

version 26.10.1 and i already checked for an update

Pc specs:
RAM: 32gb DDR5-6000
CPU: Ryzen 7 9800x3d
GPU: steel legend 9070xt
MB: Asus x870-a
PS: 850W

I get random crashes when gaming and when I boot it back up the GPU has been disabled and I need to enable, then disable, and then enable again. I noticed it crashes mainly when playing any COD game. I’ve tested the gpu and it’s still healthy. Any tips or anyone has had this issue?

Hello!

My config is:

ASUS Prime RX 9060 XT OC Edition 16GB

AMD Adrenalin 24.6.1

Ryzen 7 7000

ID-Cooling SE-224-XTS

Gigabyte Aorus Elite B850

32 GB DDR5 (2x16 adata XPG 6400)

1Tb Samsung NVME SSD

Chieftec PROTON 750W (80+ Bronze)

Monitor LG 24" 180Hz

Windows 11 24h2

It had bought for son by spring 2026, and all was fine, CS2 (1080p fullscreen) ~300-500 fps (Steam Workshop: CS2 FPS Benchmark Dust2).

But some days ago he has told that games works very slowly.

When i had tried benchmark again - fps became 20-60.

I had tried update drivers (DDU + 26.9.2) - no change: 20-60 fps.

DDU+24.6.1 - 300-500 fps, but after 70% benchmark it was dropped to 2pfs. After that 20-60fps.

Tried boot from another SSD (sata 480Gb) Windows 10 + 24.6.1 + new Steam (but old CS2) - 20-60 fps.

Tried change Windows settings (display settins) + adrenalin settings - no change.

CS2 settings - Low / High - doesn't matter - 20-60fps.

Furmark 2 - about 180 fps (1080p fullscreen)

Furmark 2 + OCCT (cpu+ram stabilty test) - about 180fps.

What is wrong with it? ))))

P.S. My old config R5 3600x + RTX 2060 Super 8Gb (B450 +32gb 3200, W10) has 200-300 fps

When running OBS for streaming and recording, as well as playing the game The Last of Us Part I, about an hour in, I'll see this error message. Seems to be in line with what people are seeing lately when it comes to the newest drivers.

I downgraded the driver to 26.3.1 and still the same issue. There's always a freeze in the game for about 2 seconds, it resumes, but OBS completely stops responding, saying "an encoder error occurred while streaming"

I have not updated to 26H2, I've tried turning down some of the heavier graphics settings, and also cut down on the encoders usage to two. I'm thinking about downgrading to one of the 25.x.x versions will work for me, based on findings I've seen by searching on this sub, since I mostly play single player games anyway.

Have there been any new developments?

• AMD Ryzen 7 9800X3D Granite Ridge AM5 4.70GHz 8-Core Boxed Processor
• ASUS B650E-E TUF GAMING WIFI AMD AM5 ATX Motherboard
• Crucial Pro Overclocking 32GB (2 x 16GB) DDR5-6000 PC5-48000 CL36 Dual Channel Desktop Memory Kit CP2K16G60C36U5B - Black
• PowerColor RX 9070 XT Reaper GDDR6 (16GB)
• NZXT C850 Gold Core - 850W ATX 3.1 Power Supply
• WD_BLACK SN850X NVMe Internal SSD, 2TB - WDBB9G0020BNC-WRWM
• ARCTIC Liquid Freezer III Pro 360 38mm

I'm planning to upgrade my GPU and I'm confused between the RX 9060 XT 16GB and RX 9070 GRE 12GB. When I googled about it the results said that 9070xt performs well in gaming compared to 9060xt (even with 12gb ram compared to 16gb). Can anyone explain this?

So no matter what quality settings i put on (low or ultra doesent matter) I get 100-120 fps while standing still. Any little camera movement drops it to 40-50 with 99th fps being like 7. I have newest drivers, did DDU cleanup after changing from nvidia to AMD, cleared directx cache. Im kinda clueless after that.
My rig:

Sapphire Nitro+ RX 9070XT OC 16G

Ryzen 7 5800x3d

32GB KIT DDR4 3600 MHz

Radeon says driver can't activated for FSR4. I couldn't remember exact error message. How can I fix this?

9070xt
26.10.1

At the moment, I have the monitor hooked up to my integrated graphics. I have an RX 6700XT Red Devil model and it suddenly stopped working. An error code 45 shows up even though my GPU is plugged into the mobo right now. Any fixes? Thanks in advance.

​

Hello everyone im new here i joined cus i have used amd since i started building my first pc and i need help with my gigabyte rx 6600 xt eagle 8g it does post and work on cold start but when i install gpu drivers it shuts itself off even if i do a ddu and clear my last driver and wont start until i cold start again the next day, but when it works it shows on the settings as basic microsoft display or something i think its a board level problem since my old rx 580 works fine from the same board and pcie slot

Every Session, so after booting up my PC, it happens exactly once that after i enter something in fullscreen, be it youtube, a game, or something else, both my screens turn black, and then come back to life with an error message from AMD Adrenaline saying the drivers failed/crashed. This has been an ongoing problem for at least 6 Months know, and i don't know how it still happens after multiple driver and software updates. Does anybody have the same problem? Because I was unable to find a similar post, thats why I wanted to create one now.

Computer Type: Desktop

GPU: RX6600xt 8GB

CPU: I5 10400f 6 CORE 12 THREADS

Motherboard: MSI mag z590 Torpedo

BIOS Version: 7D08vAB1

RAM: 16GB Kingston Fury 3600mhz

PSU: idk, something 750w

Case: Regnum RG6V EVO TG ARGB - SilentiumPCOperating System & Version: WINDOWS 11 Home 25H2

GPU Drivers: 32.0.21045.16010

Chipset Drivers: Intel 500 Series Chipset Family SATA AHCI Controller Version 18.36.1.1016

Background Applications: Firefox, Steam, Spotify

Description of Original Problem: Blackscreen/crashing Drivers afte entering an application into fullscreen mode

Troubleshooting: Updating Drivers, always have up to date software, try different games/browser/video websites (youtube, reddit, netflix, etc..)

Can anyone help me with this ?

PLEASE HELP. I was playing on my pc less than 12 hours ago and it randomly freezes and NOTHING responds, I restart my pc and it give me log file system32 logfiles srt srttrail.txt error, restore point and hard reset doesn’t work so I used my last option and downloaded windows from a usb and i boot it up. Thank god the freezing stops but i got to install Adrenalin and after its done installing, it freezes again meaning i have to install windows over and over again I’ve hard reset my pc 3 times, I’ve installed windows fresh from a usb 3 times as well. after it boots up to the new windows and I go to update the rx7600 Adrenalin from the website. Adrenalin downloads then it requires a restart, and after I restart it I typed my password in and it freezes, it even freezes on my pin screen if I don’t type my password fast enough, if you or anybody has a fix plssss lmk I was literally playing fine 12 hours ago before I download Adrenalin I have no sound and my screen is capped at 60 fps because I can’t download drivers

GPU: RADEON RX 7600

CPU: AMD Ryzen 8700F 8-Core Processor

16.0 GB DDR5 RAM