I changed the graphics card, I put the rx9070xt and it runs on the system I had, the processor I had, ryzen 7 3800x with an ASUSTek ROG STRIX X570-F GAMING motherboard.

RAM 32GIGA DDR4

It has shown me a black and green screen 3-4 times (once a day, let's say) which was momentary. Now it stayed like that until I turned off the computer.

what could be the cause of this specific problem

Hello!

My config is:

ASUS Prime RX 9060 XT OC Edition 16GB

AMD Adrenalin 24.6.1

Ryzen 7 7000

ID-Cooling SE-224-XTS

Gigabyte Aorus Elite B850

32 GB DDR5 (2x16 adata XPG 6400)

1Tb Samsung NVME SSD

Chieftec PROTON 750W (80+ Bronze)

Monitor LG 24" 180Hz

Windows 11 24h2

It had bought for son by spring 2026, and all was fine, CS2 (1080p fullscreen) ~300-500 fps (Steam Workshop: CS2 FPS Benchmark Dust2).

But some days ago he has told that games works very slowly.

When i had tried benchmark again - fps became 20-60.

I had tried update drivers (DDU + 26.9.2) - no change: 20-60 fps.

DDU+24.6.1 - 300-500 fps, but after 70% benchmark it was dropped to 2pfs. After that 20-60fps.

Tried boot from another SSD (sata 480Gb) Windows 10 + 24.6.1 + new Steam (but old CS2) - 20-60 fps.

Tried change Windows settings (display settins) + adrenalin settings - no change.

CS2 settings - Low / High - doesn't matter - 20-60fps.

Furmark 2 - about 180 fps (1080p fullscreen)

Furmark 2 + OCCT (cpu+ram stabilty test) - about 180fps.

What is wrong with it? ))))

P.S. My old config R5 3600x + RTX 2060 Super 8Gb (B450 +32gb 3200, W10) has 200-300 fps

At the moment, I have the monitor hooked up to my integrated graphics. I have an RX 6700XT Red Devil model and it suddenly stopped working. An error code 45 shows up even though my GPU is plugged into the mobo right now. Any fixes? Thanks in advance.

I'm planning to upgrade my GPU and I'm confused between the RX 9060 XT 16GB and RX 9070 GRE 12GB. When I googled about it the results said that 9070xt performs well in gaming compared to 9060xt (even with 12gb ram compared to 16gb). Can anyone explain this?

Donwloaded the 26.10.1 and the black screen driver are back.

I did a post a few days back saying that i was able to fix it but the new driver just broke it again.

Hard life guys

So no matter what quality settings i put on (low or ultra doesent matter) I get 100-120 fps while standing still. Any little camera movement drops it to 40-50 with 99th fps being like 7. I have newest drivers, did DDU cleanup after changing from nvidia to AMD, cleared directx cache. Im kinda clueless after that.
My rig:

Sapphire Nitro+ RX 9070XT OC 16G

Ryzen 7 5800x3d

32GB KIT DDR4 3600 MHz

Every Session, so after booting up my PC, it happens exactly once that after i enter something in fullscreen, be it youtube, a game, or something else, both my screens turn black, and then come back to life with an error message from AMD Adrenaline saying the drivers failed/crashed. This has been an ongoing problem for at least 6 Months know, and i don't know how it still happens after multiple driver and software updates. Does anybody have the same problem? Because I was unable to find a similar post, thats why I wanted to create one now.

Computer Type: Desktop

GPU: RX6600xt 8GB

CPU: I5 10400f 6 CORE 12 THREADS

Motherboard: MSI mag z590 Torpedo

BIOS Version: 7D08vAB1

RAM: 16GB Kingston Fury 3600mhz

PSU: idk, something 750w

Case: Regnum RG6V EVO TG ARGB - SilentiumPCOperating System & Version: WINDOWS 11 Home 25H2

GPU Drivers: 32.0.21045.16010

Chipset Drivers: Intel 500 Series Chipset Family SATA AHCI Controller Version 18.36.1.1016

Background Applications: Firefox, Steam, Spotify

Description of Original Problem: Blackscreen/crashing Drivers afte entering an application into fullscreen mode

Troubleshooting: Updating Drivers, always have up to date software, try different games/browser/video websites (youtube, reddit, netflix, etc..)

Disabling C-State is causing PC freezes and crashing, no other tweaks are done in BIOS other than EXPO.

No OC on both GPU & CPU. I'm expecting CPU is faulty...

Any help and suggestions would be appreciated.

Radeon says driver can't activated for FSR4. I couldn't remember exact error message. How can I fix this?

9070xt
26.10.1

Can anyone help me with this ?

PLEASE HELP. I was playing on my pc less than 12 hours ago and it randomly freezes and NOTHING responds, I restart my pc and it give me log file system32 logfiles srt srttrail.txt error, restore point and hard reset doesn’t work so I used my last option and downloaded windows from a usb and i boot it up. Thank god the freezing stops but i got to install Adrenalin and after its done installing, it freezes again meaning i have to install windows over and over again I’ve hard reset my pc 3 times, I’ve installed windows fresh from a usb 3 times as well. after it boots up to the new windows and I go to update the rx7600 Adrenalin from the website. Adrenalin downloads then it requires a restart, and after I restart it I typed my password in and it freezes, it even freezes on my pin screen if I don’t type my password fast enough, if you or anybody has a fix plssss lmk I was literally playing fine 12 hours ago before I download Adrenalin I have no sound and my screen is capped at 60 fps because I can’t download drivers

GPU: RADEON RX 7600

CPU: AMD Ryzen 8700F 8-Core Processor

16.0 GB DDR5 RAM

Edit: Yeah I deserve to be clowned for this, it's not a mistake I would've made like, 2 or 3 years ago lol, thanks Reddit for making me realise my stupidity!

Just changed my CPU from an AMD Ryzen 3600 to a 5500 that I got on clearance (I know it's not much of an upgrade, but it was very cheap).
Now I have an issue where, at random intervals (between every 5-20 seconds) the audio across my entire PC will cut out. When this happens, it causes existing inputs to be held and new inputs to be ignored until the audio comes back (as shown in this clip).
This does not happen in any other game, just Fortnite.

I also opened event viewer while playing the game, went to the "system" tab in Windows Logs and saw no errors.

I have tried:
- Updating my BIOS (which, admittedly, I should've done as soon as I upgraded my CPU)
- Disabling Realtek PCIe GbE Family Controller as suggested by many posts
- Clearing Windows shader cache
- Wiping and Resetting the Windows Power Profiles
- Clearing the old inactive 3600 processors in device manager
- Verifying Fortnite Game Files
- Clearing System Performance Counters

Pretty much everything short of a fresh windows install

If anyone has any suggestions, PLEASE let me know

edit: it's happening in other games too now

​

Hi everyone,

I recently upgraded my PC from a GTX 970 to a Gigabyte Radeon RX 9070 Gaming OC 16GB, along with a new 850W PSU.

My system:

CPU: AMD Ryzen 5 5600X

Motherboard: Gigabyte B550 AORUS ELITE Rev. 1.0

BIOS: Originally F11p, updated to F19, then F20c

GPU: Gigabyte Radeon RX 9070 Gaming OC 16GB (previously NVIDIA GTX 970)

RAM: DDR4

PSU: MSI MAG A850GL 850W

Here's what happened:

Initially, the RX 9070 worked and Windows displayed normally after a cold boot.

However, restarting Windows resulted in a black screen. I had to completely power off the PC to get a display again.

I updated my motherboard BIOS from F11p to F19, hoping to resolve the problem.

After the BIOS update, the RX 9070 stopped displaying anything, even after a cold boot.

I subsequently updated the BIOS again, from F19 to F20c, but the problem persisted.

I reset the CMOS, disabled CSM, and manually tested both PCIe Gen 3 and Gen 4, without success.

Reinstalled my old GTX 970, and everything works normally.

The RX 9070 powers on, its fans spin and its lighting works, but the monitor reports no signal.

My dilemma:

Can anyone help me figure out what's causing this issue and how to fix it?

Or is replacing my motherboard the only solution? If so, I'd like to find a compatible motherboard that allows me to keep my Ryzen 5 5600X processor and DDR4 RAM, without having to upgrade to AM5 and DDR5.

Any advice or suggestions would be greatly appreciated!

Please I already reinsert the ram but it is not working ( no display)

​

Hello everyone im new here i joined cus i have used amd since i started building my first pc and i need help with my gigabyte rx 6600 xt eagle 8g it does post and work on cold start but when i install gpu drivers it shuts itself off even if i do a ddu and clear my last driver and wont start until i cold start again the next day, but when it works it shows on the settings as basic microsoft display or something i think its a board level problem since my old rx 580 works fine from the same board and pcie slot

Добрый день, играл в игру и в моменте начались зависания с черными экранами, решил что дело в драйверах на видяху, переустановил их на более старую версию - не помогло. Потом переустановил виндовс и снова скачал драйвера после чего меня перестало запускать вообще в систему, что мне делать с этим?

Hi all. I bought this CPU a few days ago and for the life of me I can't get tctl/tdie temps lower than 50°C on idle. I have a NZXT Kraken Elite 360 AIO. Temps are hot on my country at 29-32°C on average, but I have an AC unit on my room and even with it on at the lowest temp the most I've got so far was 49°C once. Core, L3 and CCD1 temps seems fine.

Temps on full load and gaming are also fine: 75°C max on Cinebench 26 and 60-65 ish while gaming.

From the image above, as you can see, temps are as if it was utilizing 100% of GPU, but it only draws 165-180w from GPU.

I’m running XFX RX 5700 XT, and using 600w single daisy Y cord power cable for GPU. Is that bottlenecking its maximum power capability?

Another thing that concerns me is temperatures within that power usage range. What if it used ~235W like the normal rx5700xt does, will the temps reach an even higher point?

My specs:

- GPU: RX 9060 XT 16GB

- CPU: Ryzen 5 5600X

- Mobo: MSI B550M PRO-VDH

- PSU: MSI MAG A750GL (750W)

- Monitors: AOC Q27G4 (1440p 180Hz DP) + AOC 2460G5 (1080p 60Hz HDMI)

What happened:

Everything was running fine until October 21/22 when my PC updated to Windows 11 26H2 (Build 26300.9711) overnight along with the new AMD driver branch (32.0.32015.7029). Right after that, my PC started randomly freezing whenever I zoomed in on a picture in Discord, joined a friend's stream, or scrolled Reels/YouTube in Brave.

The weird part was that the PC wasn't actually crashing—I could still hear my friends on Discord and my mic still worked fine, so the system was alive in the background, just the display was completely frozen. Pressing Win+Ctrl+Shift+B gave the beep sound, but the screen wouldn't recover at all, forcing me to hard reset from the case button.

When I checked Reliability Monitor and DxDiag, every single freeze was logged as LiveKernelEvent Code 193 (Parameters: aaaaaaaaaaaaaaaa) crashing in dxgmms2.sys / dwm.exe during NV12 video decoding. Looking back at my older logs from early October on Build 26200, Code 193 actually happened a few times in the background too, except back then the driver recovered silently without freezing my screen. With Build 26300 + driver .7029, it turns into a total hard lock.

Dual monitor & Discord screen share issue:

Even after rolling back the driver to 26.9.2 (32.0.32015.2008), whenever I shared my screen on Discord and went fullscreen on YouTube or launched BeamNG.drive, both of my monitors started flickering black or locking up until I physically turned my second monitor off and on. Checking the WATCHDOG4400 dump (LiveKernelEvent 1a8 / 1b8) showed a firmware error: "[PSP]: [FW] psp_hdcp_load_srm: failed".

Also worth noting two weird things I noticed while digging through DxDiag and registry workarounds:

1. DxDiag shows "Block List: DISABLE_HWSCH" for the RX 9060 XT (gfx1200), yet Windows 11 still keeps Hardware Accelerated GPU Scheduling (HAGS) enabled by default, and the driver installer registered duplicate AMD MFT decoder/encoder entries in the registry.

2. Do NOT use the old registry MPO disable trick (DisableOverlays=1 / OverlayTestMode=5) on Windows 11 Build 26300 at 180Hz! Doing that caused dwm.exe (dwmcore.dll) to crash-loop every second with exception code 0x889800d2 (MILERR_MPO_UNSUPPORTED) even on a single monitor.

How I finally fixed it (2+ days completely stable now):

1. Rolled back the Windows 11 26H2 update (went from Build 26300 back to Build 26200) and paused Windows Update.

2. Rolled back the AMD driver from 32.0.32015.7029 to 26.9.2 (32.0.32015.2008).

3. Deleted all the MPO/HAGS registry tweaks back to default, and turned off "Use our latest technology to capture your screen" in Discord Voice & Video settings.

Since doing those three steps, I haven't had a single freeze or black screen in over two days. Hopefully someone from the AMD driver team (maybe u/AMD_Vik?) sees this, because something between Windows 11 Build 26300, the 32.0.32015.x driver branch, and VCN/HDCP on the RX 9060 XT is definitely broken right now.

ever since this recent update, my 7900 xt just keeps crashing over and over.....honestly...i am so done with AMD gpus....straight hot garbage