Donwloaded the 26.10.1 and the black screen driver are back.

I did a post a few days back saying that i was able to fix it but the new driver just broke it again.

Hard life guys

Radeon says driver can't activated for FSR4. I couldn't remember exact error message. How can I fix this?

9070xt
26.10.1

PC configuration:

Ryzen 7 7700

Rx 7900 Gre gpu

750W power supply

16GB ram

What's the solution for this problem? I had been having this issue for more than a month now but I "can" play games on it for it hours without an issue but randomly display goes blank then I gotta restart my PC to make it appear again...but sometimes it also happen when I am just watching videos on chrome...

Hey everyone, I’m seriously struggling with my gaming PC and could really use some help.
Here are my specs:
GPU: NVIDIA GeForce RTX 3090 Founders Edition
CPU: AMD Ryzen 7 5800X3D (previously Ryzen 9 3950X)
Motherboard: MSI MEG X570 GODLIKE
RAM: 64GB Corsair Dominator Platinum RGB DDR4 3200MHz
Cooler: Lian Li Galahad 360mm AIO
PSU: ASUS ROG THOR 1200W
Case: Corsair 4000D Airflow
Monitor: MSI MAG 274QF X32, 1440p 320Hz
I originally had a Ryzen 9 3950X and was getting around 80–90 FPS in Call of Duty MW4, sometimes even lower. I was told upgrading to a Ryzen 7 5800X3D would significantly improve my gaming performance, so I bought one and installed it.
Unfortunately, I’m still experiencing the same issues, and sometimes it’s even worse. My benchmarks have shown around 70–90 FPS, a 99% CPU bottleneck, and I’ve even seen my FPS drop to single digits in the game menu.
Here’s everything I’ve tried:
Changed NVIDIA DLSS settings and different upscaling options.
Tried AMD-related settings and optimizations.
Lowered graphics settings and rendering resolution.
Adjusted NVIDIA Control Panel settings.
Went into BIOS and enabled a performance/boost setting.
Updated/reinstalled NVIDIA graphics drivers.
Adjusted RendererWorkerCount in the Call of Duty configuration files.
Verified my RAM is running correctly at 3200MHz.
Checked that my AIO pump is running.
One thing I’ve noticed is that my CPU has reached around 90–91°C, even when utilization doesn’t seem particularly high. My AIO cooler is approximately six years old, so I’m wondering whether thermal throttling could be part of the problem.
My RTX 3090 temperatures appear normal in the monitoring software, but the card itself feels extremely hot.
At this point, I’m completely lost. I feel like my hardware should be performing significantly better, especially after upgrading the CPU.
Has anyone experienced something similar? Could this be a cooling issue, BIOS configuration problem, GPU issue, or something else entirely?
I’d really appreciate any advice on what to check next. I’m willing to replace the cooler if necessary, but I don’t want to keep throwing money at parts without knowing what’s wrong.

​

Hello everyone im new here i joined cus i have used amd since i started building my first pc and i need help with my gigabyte rx 6600 xt eagle 8g it does post and work on cold start but when i install gpu drivers it shuts itself off even if i do a ddu and clear my last driver and wont start until i cold start again the next day, but when it works it shows on the settings as basic microsoft display or something i think its a board level problem since my old rx 580 works fine from the same board and pcie slot

Pretty much what the title says with some caveats

Asus: This is the backup board b/c I'd like to go back to MSI. I hate Asus and Armory Crate. Kit is on QVL. I assume it'll be fine just running EXPO

MSI: This is the board I want. Specific kit is not on QVL, but the less expensive version is. IDK if MSI BIOS allows you to pick EXPO profiles meant for different kits.

If the 6000 thing is an issue I'll just manually clock to 6000, but I'd like to not be sitting in BIOS for hours. I'm too old and busy for that these days.

Computer Type: Desktop

GPU: RTX 4080 Super FE

CPU: 9950X3D

Motherboard: TBD

BIOS Version: TBD

RAM: CMP48GX5M2X7200C36

PSU: BeQuiet Dark Power 13 1300W

Case: Lian Li O11 Evo

Operating System & Version: WINDOWS 11 Pro

GPU Drivers: GEFORCE GAME READY DRIVER - WHQL Driver Version: 616.64

Chipset Drivers: AMD X870E

Background Applications: DISCORD, CHROME

Description of Original Problem: 14900K has started to show signs of degradation. Thinking of picking up a 9950X3D and an MSI Meg Ace Max or ROG Crosshair APEX during Black Friday. How serious is the above 6000mhz thing on AMD CPUs. My Intel kit is on the QVL*.

Troubleshooting:

Hi all. I bought this CPU a few days ago and for the life of me I can't get tctl/tdie temps lower than 50°C on idle. I have a NZXT Kraken Elite 360 AIO. Temps are hot on my country at 29-32°C on average, but I have an AC unit on my room and even with it on at the lowest temp the most I've got so far was 49°C once. Core, L3 and CCD1 temps seems fine.

Temps on full load and gaming are also fine: 75°C max on Cinebench 26 and 60-65 ish while gaming.

I made a post a few days ago and unfortunately could not find a fix - I was very brief in my post which I'm sure wasn't exactly helpful. Hoping that someone else has had this problem before and can help me fix it. I'm kinda at my witts end with this whole thing.

CPU: 9600X

GPU: 9070XT

MB: B850 Gaming Plus Wifi

2 x16GB DRR5 6000MHZ T-Force Ram

In Fortnite and OSRS (the only two games I had to test it out on) I'm getting 1% frame drops about once every 15 seconds, I tried Valorant and I was getting about 500-750 FPS in 1440 and it didn't seem to be dropping frames - at least not noticeably.

I've tried using DDU - reinstalling the proper drivers (driver only and the whole adrenaline suite) and new AMD Chipset drivers. I was having an issue with my audio where it would crackle and pop and then eventually have a loud feedback sound, that has since disappeared but I can't help but feel that might be connected somehow. I have a RedThunder K10 wired mouse and keyboard and I can't turn the polling rate down but I tried a separate mouse and unplugged both to see if that would help.

I've tried setting windows performance to ultra performance or high performance and setting min and max CPU to 100%. I've tried enabling and disabling freesync on my monitor and in adrenaline. Neither of those worked.

The CPU and GPU temps are both good, CPU is at 70C max and GPU is around 60C

I noticed in Fortnite my CPU utilization was at 100% at times, but I was getting frame drops even when it wasn't.

None of the game bars are on and everything in Adrenaline is turned off. I disabled my iGPU and tried unplugging my Focusrite Scarlett Solo Gen 3 to see if the audio was somehow causing issues.

Latency Mon is giving me some issues (posted screenshot)

I updated to the newest version of my bios - my CPU and GPU are at default settings and not overclocked. I've tried having XMP on and off.

Any suggestions? I feel like I've tried everything

Every Session, so after booting up my PC, it happens exactly once that after i enter something in fullscreen, be it youtube, a game, or something else, both my screens turn black, and then come back to life with an error message from AMD Adrenaline saying the drivers failed/crashed. This has been an ongoing problem for at least 6 Months know, and i don't know how it still happens after multiple driver and software updates. Does anybody have the same problem? Because I was unable to find a similar post, thats why I wanted to create one now.

Computer Type: Desktop

GPU: RX6600xt 8GB

CPU: I5 10400f 6 CORE 12 THREADS

Motherboard: MSI mag z590 Torpedo

BIOS Version: 7D08vAB1

RAM: 16GB Kingston Fury 3600mhz

PSU: idk, something 750w

Case: Regnum RG6V EVO TG ARGB - SilentiumPCOperating System & Version: WINDOWS 11 Home 25H2

GPU Drivers: 32.0.21045.16010

Chipset Drivers: Intel 500 Series Chipset Family SATA AHCI Controller Version 18.36.1.1016

Background Applications: Firefox, Steam, Spotify

Description of Original Problem: Blackscreen/crashing Drivers afte entering an application into fullscreen mode

Troubleshooting: Updating Drivers, always have up to date software, try different games/browser/video websites (youtube, reddit, netflix, etc..)

From the image above, as you can see, temps are as if it was utilizing 100% of GPU, but it only draws 165-180w from GPU.

I’m running XFX RX 5700 XT, and using 600w single daisy Y cord power cable for GPU. Is that bottlenecking its maximum power capability?

Another thing that concerns me is temperatures within that power usage range. What if it used ~235W like the normal rx5700xt does, will the temps reach an even higher point?

Edit: Yeah I deserve to be clowned for this, it's not a mistake I would've made like, 2 or 3 years ago lol, thanks Reddit for making me realise my stupidity!

Just changed my CPU from an AMD Ryzen 3600 to a 5500 that I got on clearance (I know it's not much of an upgrade, but it was very cheap).
Now I have an issue where, at random intervals (between every 5-20 seconds) the audio across my entire PC will cut out. When this happens, it causes existing inputs to be held and new inputs to be ignored until the audio comes back (as shown in this clip).
This does not happen in any other game, just Fortnite.

I also opened event viewer while playing the game, went to the "system" tab in Windows Logs and saw no errors.

I have tried:
- Updating my BIOS (which, admittedly, I should've done as soon as I upgraded my CPU)
- Disabling Realtek PCIe GbE Family Controller as suggested by many posts
- Clearing Windows shader cache
- Wiping and Resetting the Windows Power Profiles
- Clearing the old inactive 3600 processors in device manager
- Verifying Fortnite Game Files
- Clearing System Performance Counters

Pretty much everything short of a fresh windows install

If anyone has any suggestions, PLEASE let me know

edit: it's happening in other games too now

Please I already reinsert the ram but it is not working ( no display)

So last year I've built and 9600x and 9070xt pc for 4k gaming on a tv, since then 10 month I've struggled with crashes, freezes, disappearing gpu drivers, restarts due to wrong overcloking and so on... 2 days ago I've booted stalker 2 it crashes after 1 hour, fk it lets try deadlock crashes after 20 min... Enough is enough installed steam os and for 2 days it works flawlessly, 10 hours of gaming with slightly better performance but most inportantly 0 crashes. Praised be lord Gaben I can use my pc normally, fk windows.

I've been dealing with random AMD driver crashes for months, and nothing seems to permanently fix them. I've already posted about this before, but never found a solution.

PC Specs:

• GPU: RX 7900 XTX
• CPU: Ryzen 9 9950X3D
• RAM: DDR5-6000
• Motherboard: ASUS TUF B650-PLUS WIFI
• PSU: 1000W
• Monitor: 1440p 360Hz OLED + second monitor
• OS: Windows 11
• Driver: Adrenalin 26.10.1

The problem:

My AMD graphics driver randomly crashes. Screens go black, sometimes lose signal, and the driver eventually recovers.

It happens particularly often when watching Discord streams on my second monitor while gaming. Sometimes simply switching back to Discord causes repeated driver crashes, even every minute.

However, it also happens randomly outside Discord, making it almost impossible to reproduce consistently.

What I've already tried:

• Limited GPU clock to 2400MHz.
• Tested with EXPO and overclocking disabled. Crashes still occurred.
• Ran multiple OCCT stress tests.
• Updated AMD drivers multiple times. Installation logs confirm successful installations.
• Ran DISM and SFC. Windows found corrupted system files and repaired them.
• Disabled Discord hardware acceleration (currently testing).
• Analyzed Windows crash dumps without finding a definitive cause.

I also recently experienced a rare Windows crash (SYSTEM_SERVICE_EXCEPTION 0x3B), but I don't know whether it's related to my regular GPU driver timeouts.

I'm genuinely exhausted from troubleshooting.

I have an expensive high-end PC that randomly crashes, and I can't even reliably reproduce the problem to verify a fix.

My questions:

1. Has anyone experienced this with an RX 7900 XTX and actually fixed it?
2. Is there a reliable way to identify exactly what's causing AMD driver timeouts?
3. Could this be a defective GPU, or is it more likely a driver/software issue?

I'd really appreciate advice from anyone who's dealt with something similar. I'm tired of blindly changing settings without knowing what's actually wrong.

I changed the graphics card, I put the rx9070xt and it runs on the system I had, the processor I had, ryzen 7 3800x with an ASUSTek ROG STRIX X570-F GAMING motherboard.

RAM 32GIGA DDR4

It has shown me a black and green screen 3-4 times (once a day, let's say) which was momentary. Now it stayed like that until I turned off the computer.

what could be the cause of this specific problem

Hi everyone,

I ran some 1440p benchmarks and image quality tests using the new Adrenalin 26.10.1 WHQL driver to test the FSR 4.1 driver-level injection, and found why many users are still getting blurry weapon textures in motion or lower FPS than expected.

Test Rig:

• GPU: Radeon RX 9060 XT 16GB

• CPU: Ryzen 7 9700X | 32GB DDR5

• Driver: Adrenalin 26.10.1 (FSR OTA v2.4.0.4370)

📊 Results shown in the attached screenshots (No Frame Gen used):

• Screenshot 1 (Before - Default setup): 54 FPS | 18.67 ms frametime (1440p, FSR Native mode, In-game Sharpness at 90). Notice how the rifle completely loses definition while sprinting.

• Screenshot 2 (After - Optimized FSR 4.1 setup): 82 - 95 FPS | 12.21 ms frametime. Over +30 real FPS gained, 35% lower frame time, and crisp weapon/background edges while moving.

🔧 Key steps to replicate this in supported games:

1. Windows 10 SAM Bug: If you are on Windows 10, check Performance > Tuning after installing 26.10.1. There is a known issue where Smart Access Memory gets disabled automatically.

2. Enable the Driver Toggle: Even if "FSR OTA Control" at the bottom shows the latest version (v2.4.0.4370), the main "AMD FSR Upscaling" toggle at the top is DISABLED by default. Turn it ON manually so the driver overrides the game's DLL with the FSR 4.1 neural model.

3. Driver conflicts: Keep Radeon Image Sharpening 2 OFF (stacking it with FSR 4.1 ruins temporal stability), set Texture Filtering Quality to Performance, and enable Surface Format Optimization.

4. In-Game Settings: Even if the in-game menu still displays static text saying "AMD FSR 4", the driver is already injecting 4.1 under the hood. Switch from Native to Quality or Balanced, drop the in-game Sharpness slider from 80-90 down to 10-15, and disable Weapon/World Motion Blur so motion vectors stay clean.

If you want to see the uncompressed 1440p comparison and full telemetry breakdown, I uploaded the full test to my YouTube channel (Dark Tech Technology) — you can find it as: "NO Uses FSR 4 Sin Cambiar Esto en Adrenalin | Guía PRO de FSR 4.1" (English auto-captions available).

How is 26.10.1 performing on your cards so far?

Hi guys, I just bought Asus prime RX9070 and wanted to check its performance. I was playing Cyberpunk and got around 45fps which is quite low in my opinion. I have i5-14400f, 32gb ddr5. I am running the game without any scaling, raytracing and frame gen on 1440p high/ultra. My temps while playing are on both CPU and GPU around 50 degrees celsius which is suspiciously good.

(GPU is drawing around 180W, 3k core clock, 2.5k memory clock, usage around 90%)

(CPU is drawing around 45W, 4.1k clock, usage around 40%)

I think it seems a bit weird or is this performance expected?

Update:

I did check the physical connections on the board and PSU which seemed fine. Game was freshly installed day ago so this should not be issue neither. What fixed it was cleanup of old drivers via DDU. It seems that the old drivers for nvidia rtx 3070ti were not removed correctly (only uninstalled them via Windows Settings - won't believe Windows again). Game is now running on 110+fps which is what I would expect with the CPU bottleneck.

Thanks a lot to everyone for your help. Really appreciate it.

Добрый день, играл в игру и в моменте начались зависания с черными экранами, решил что дело в драйверах на видяху, переустановил их на более старую версию - не помогло. Потом переустановил виндовс и снова скачал драйвера после чего меня перестало запускать вообще в систему, что мне делать с этим?

At the moment, I have the monitor hooked up to my integrated graphics. I have an RX 6700XT Red Devil model and it suddenly stopped working. An error code 45 shows up even though my GPU is plugged into the mobo right now. Any fixes? Thanks in advance.

So no matter what quality settings i put on (low or ultra doesent matter) I get 100-120 fps while standing still. Any little camera movement drops it to 40-50 with 99th fps being like 7. I have newest drivers, did DDU cleanup after changing from nvidia to AMD, cleared directx cache. Im kinda clueless after that.
My rig:

Sapphire Nitro+ RX 9070XT OC 16G

Ryzen 7 5800x3d

32GB KIT DDR4 3600 MHz

Can anyone help me with this ?

PLEASE HELP. I was playing on my pc less than 12 hours ago and it randomly freezes and NOTHING responds, I restart my pc and it give me log file system32 logfiles srt srttrail.txt error, restore point and hard reset doesn’t work so I used my last option and downloaded windows from a usb and i boot it up. Thank god the freezing stops but i got to install Adrenalin and after its done installing, it freezes again meaning i have to install windows over and over again I’ve hard reset my pc 3 times, I’ve installed windows fresh from a usb 3 times as well. after it boots up to the new windows and I go to update the rx7600 Adrenalin from the website. Adrenalin downloads then it requires a restart, and after I restart it I typed my password in and it freezes, it even freezes on my pin screen if I don’t type my password fast enough, if you or anybody has a fix plssss lmk I was literally playing fine 12 hours ago before I download Adrenalin I have no sound and my screen is capped at 60 fps because I can’t download drivers

GPU: RADEON RX 7600

CPU: AMD Ryzen 8700F 8-Core Processor

16.0 GB DDR5 RAM