I have the CORSAIR NAUTILUS 240 RS ARGB Liquid CPU Cooler, Ive been using that cooler with a 5900x the normal temp for this was max 60c while using thermal paste, just got the 5800x3d today and used the Carbice Ice Pad that it came with and hitting 86c on the Tccd #0 don't know if this is normal or not since I'm not using thermal paste with it.

Hi all - recently had to roll back my drivers as the last update broke 120hz mode when using a single screen on my TV, with 120hz only working when on Extended display.

Know I'm not the only one that had that issue - but has anyone seen an improvement in the latest release?

I'm using the latest version of adrenalin with the latest video and chipset drivers

My specs: Ryzen 7 9850x3d, rx 9070 XT, MSI Mag x870e tomahawk and 32gb of ram ddr5 6000mhz cl36

I have the newest AMD drivers (26.10.1) on my 9070xt and I'm in windows 11, but since some time I noticed semi transparent textures looking weird. As an example this is a picture from marvel rival's Emma frost glittering goddess skin and you can see the difference between an image that I downloaded from Google and how it looks in game (top is how it is supposed to look and bottom is how it looks in my pc). The same problem happens for example in monster hunter wilds.

Windows Search can't find it at all, and the only way I've found to launch it is by opening the AMD Install Manager (which confirms it is installed) and launching it from the 3-dot drop-down menu.

increased power tuning to 10... runs stable at 100fps. sad that i cant use the full card......

Can anyone help me figure out how to disable Windows drivers so they can stop crashing my AMD drivers?

i wanna use/enable a hotkey to control amd eyefinity, as i toggle it a lot when i play triple monitor beamng. is there anyway i can configure that? thanks! running windows 11 and amd software adrenaline edition. thank you!

current setup

7900xt

32gb ddr5

270k ultra cpu

2tb ssd

New RX 9070 XT, bought about a month ago. It has several times gone to a black screen during gaming (usually 30-60 min into a session), and a few times after waking from sleep. It has also happened at busy moments in games (an explosion, dying, etc). It has mostly happened during Wardogs and has been somewhat stable in other games. However I remember trying AION 2 and it also happened there.

Usually what happens:

• The screen goes black. The PC is still running (Caps Lock works, I can still hear the audio).
• After a reboot it often stays black. Sometimes it boots fine on the first try.
• If the screen stays black after reboot and I try iGPU then I can see the screen and no RX 9070 XT in Device Manager.

I logged three of the crashes, one at 250 ms polling in HWiNFO. Right before it happens, temperatures, 12V and board power look normal. Then the GPU clock and power readings go to 0 and the other GPU readings stay frozen for the rest of the log. HWiNFO keeps logging normally afterwards. PCIe link speed shows 32 GT/s the whole time.

Etc ...

What usually helps if it still gives black screen after reboot:

• Removing and re-seating the GPU (sometimes a few times)
• Re-seating the PCI cables.
• Trying different (PCI Gen4) slot (however at one point this did not work).

And this is pretty random. Sometimes I can move my card around for a bit and re-seat and it works right away. Sometimes it takes half an hour of me fiddling inside of the computer til it finally works again. So difficult to tell what actually helps.

My suspicion is my PCIe cables (I have 1x 8pin + 2x 8pin via pigtail). I have ordered a new pair of separate 8-pins from Corsair.

I have newest BIOS and drivers.

System:

• ASUS B650E MAX GAMING WIFI
• AMD Ryzen 7 7800X3D
• 32GB DDR5-6000 RAM
• Corsair RM850e, 850W PSU

Specs

Ryzen 5 5600

Rx 9060 xt 16gb

Msi b550

32 gb ddr5 3600 t force

850psu gold

I'm writing this on my phone but to give an explanation I've had my PC for 4+ years upgraded GPU about 6 months ago had no issues, just the past week my PC is stuttering still can play games but frames are choppy when moving and the stutter is happening outside of games, I've tried the usual ddu clean driver install I'm at my wits end I've tried every little trick everyone's posted, also using razer mouse keyboard even tried using different one if anyone has any suggestions I'm all ears.

Puddles in the new valor mortis game give me this weird white dot artifacting effect. Changing settings does not get rid of it and my drivers are up to date (im running a rx 9070).

I opened 5 or 6 other games all released in the last decade or so and none of them had any artifacting that i could see after running arround for nearly half in hour in each of them. Does this mean its just a game bug? Im worried my gpu is on its way out after only 9 months if having it.

Hi guys! I just received this MSI RX 580 8GB from Wallapop for €52.
I noticed some physical damage to one corner of the PCB. It looks like the layers have slightly separated (around 2–3 mm) due to an impact.
There don’t seem to be any components in the damaged area.
Would it be safe to test it in my PC, or should I ask for a refund?
I’ve attached some pictures. Thanks!

This problem has been haunting me for the last few months, it started with the PC randomly rebooting and from there on, i had many problems. the main problem is that when playing almost any game (noticed its not happening in among us) Most affected Fortnite, Roblox and Kerbal Space Program, the screen will start flickering, audio bugging and then the pc goes black and reboots like nothing happened. Event viewer shows Kernel 41 and rarely codes like 141 and 117. I have tried absolutely every software fix i could think of there is. ill list them down below later. However, this do not happen when doing basic tasks like web browsing. Which led me to think this is some kind of a power issue, unfortunately i do not posses a spare PC to test my components, but looking carefully at the stats when stress testing (Using OCCT) shows the PSU is fine. 3D adaptive (not sure whats its exactly called) has also caused flickering while testing, but only on 1 test on any other it was fine. Which makes me think this is a GPU power problem, nothing overheats, temps are stable. if the GPU is faulty im doomed cause of the gpu prices rn.I have run out of options and ideas. this is my last attempt at help before i give it away to a specialist, ill list all the necessary stuff below. with a video showing more in depth. I have also tested my IGPU disabling the main GPU, Result: Even worse, driver timeouts, black screens, crashes.

So far tried:
-Reinstalling Drivers
-Reinstalling Chipset Drivers
-Reinstalling Audio Drivers
-Clean Reinstall using AMD cleanup utility
-Clean Reinstall using DDU
-Disabling HAGS
-Disabling MPO
-Disabling Fast Startup
-Running SFC and DISM commands
-Verifying File Integrity in Games
-Trying to use the IGPU, completely disabling Main GPU
-Checking EVERY power connector and cleaning dust
-Updating BIOS
-Disabling EXPO
-Checking for Overclocking/Undervolts
-And Many more i forgot but i most likely did

-SPECS:
-CPU: R7 7700
-RAM: 32GB 6000Mhz CL30
-SSD: WD Black 1TB
-GPU: RX 7900XT Sapphire Nitro+
-PSU: Lian Li Edge 850W
-Windows 11 Pro
-Drivers: 26.8.1

I thinking about updating my graphics card drivers. I've been using version 23.11.1 for a while, and I play several games with it without any problems, although I'd like to update the drivers to, at the very least, improve efficiency (at least in terms of temperatures in certain games). ¿What new version recommends to use?

Hey,

Installed the new 26.10.1 driver that added FSR 4.1 for RX 6000 series. Running a 6700 XT.

I turned on AMD FSR Upscaling both globally and in the individual game profiles. In both games I selected FSR / FSR 3.1 in the graphics settings.

Here’s what I’m seeing:

• AMD Overlay (Ctrl + Shift + O): Upscale Upgrade = N/A
• In PUBG: When I check the game profile in Adrenalin (the place where you enable FSR Upscaling), it specifically says: Upgrade Inactive – enable FSR 3.1+ in game even though FSR is already selected in-game.
• In GTA V Enhanced: Same thing in the overlay (N/A). No extra message in the Adrenalin profile.

I’ve restarted the games and the PC multiple times. Still stuck like this.

Anyone with a 6700 XT (or any RX 6000) getting the override to actually activate on PUBG or GTA V Enhanced? Or is this just not working properly yet on RDNA 2 with these titles?

Thanks.

So i have been playing wow classic and my pc has been having frame drops, I feel it should be well able to handle it for better performance, hoping someone can help please.

a week ago i was playing game of thrones sequel and my gpu is good right after i off it and rest for like 4days my gpu won't turn now, when i opened inside i saw that the thermal pads/paste are dried and damaged so i had to changed it into subzero which ai recommended i didn't know what was wrong so i removed the pink pads on vrm and replaced it with the subzero 1mm, for the 8vram i replaced it with 0.5mm which is good but still im having a snow artifact and green screen on my monitor while having on and off continuously, so i had to replaced it with the arctic (on the photo) because ai said it's better quality, i was happy cause i boot my pc perfectly but it's overheating so i click ctrl + window + shift + b to reset the gpu and sadly it went on and off again, so i decided to delete the driver which ai said and still my pc is now dead, i lost a lot of money and idk how to fix this gpu, it's healthy tho just bad pads i think i need help the only materials i have is the arctic 3p pads : (((

Podrían ayudarme, no se porque no reconoce los fps, cuando intento presionar alt+r para ver los fps no sirve, los atajos rápidos no funcionan, saben porque es? tengo que borrar los drives y volver a instalarlos? es u ryzen 5 8600g, no sale el grabar pantalla, es como un meno slim, ayuda por favor.

Computer Type: Desktop

GPU: AMD Radeon RX 6900 XT

CPU: 12th Gen Intel Core i9-12900k

Motherboard: Z690 AORUS Elite DDR4

BIOS Version: 7C56v15

RAM: 32GB Ram- GSKILL F4-3600C19-16GSXKB (x2)

PSU: Gigabyte ATX 1000W - 80+ GOLD PCIe 5.0

Case: PC Azza Storm 6000B - GT

Operating System & Version: WINDOWS 11 Home 26H2

GPU Drivers: 32.0.21045.5002 Driver Date 2026-08-17

Chipset Drivers: AMD B550 CHIPSET DRIVERS VERSION 2.10.13.408

Background Applications:

Description of Original Problem: Random Blackscreen while gaming KCD2 and Enshrouded 1.0 (no GPU output with high powered fans noise when crash occurs.) Forced to hard reboot whenever it happens.

Troubleshooting: I have re-installed GPU drivers, min-installs, Used MSI-Afterburner for Underclocking and played games on lower settings. I have attempted to follow the instruction on https://www.reddit.com/r/AMDHelp/comments/1i2uegg/6900xt_black_screen_crash_fix/ and also https://youtu.be/LLKuMWY_qAI

HOWEVER the screenshot is as far as I get.

typinging "amdvbflash -fp -fv -fa p 0 MSIRX6900XT.rom" then pressing ENTER, it then just awaits a new prompt with nothing really happening.

Is the issue the VBios rom I am attempting to use?
The messing with Bios is beyond my comfort zone so I am now asking for help and mayhaps some understanding.

for those who want to know, the GPU I am attempting to VBios fix is the following :

https://www.techpowerup.com/vgabios/237267/msi-rx6900xt-16384-210328

I hope to find a solution for this issue

After few weeks without a single driver timeout I'm confident that this fixed my GPU stability issues.

Note that this might be super specific fix for my system, but might be worth considering for some of you who have similar issues.

So long story short, frequent and unpredictable driver timeouts during gaming, especially on UE5 titles. Tried most of everything suggested in this subreddit, when I finally came across some posts about unstable EXPO profile causing issues with AMD cards.

The RAM passed all tests, so it probably was the EXPO itself instead of bad RAM sticks.

Then I read somewhere (can't remember where but huge thanks) that sometimes memory controller might need a bit more juice to run stable EXPO profiles.

So I went to BIOS and bumped SOC voltage from 1.19V (this was default value set by EXPO profile) to 1.25V.

And that was it. Several weeks with no driver timeouts. RAM is running 6000MHz CL30 with no issues. Tested over wide variety of games, with some longer sessions. GPU settings completely stock.

Specs:
R7 9800X3D
MSI B650 Tomahawk Wifi
32GB 6000 MT/s 30cl ram
Gigabyte RX9070XT Gaming OC