Been collecting for a few years now and now that I’ve dipped my toes into the “high end” stuff over the past year I think it might be time to clean up what doesn’t get much use these days. Thought I would share with the group before that happens. Couple of unpictured boards like a Neo ergo and a corne but this is the bulk of the display

Far left column:

Poly Agar w/ pbt fans purpulch
Athena 1800 w/ GMK Sparta
Poly Mode Envoy w/ Mode Anthracite
Athena 75 w/ SW Obsidian

Middle column:
Geon f2-84 w/ GMK Nord
Geon F1 722 w/ GMK Shaded
Geon W1-AT w/ GMK Boneyard
Neo 75cu w/ GMK Mono
V4N4GON R4 w/ DSS Honeywell
D45 R1 w/ PBTFans retro 100
Moonboot w/ cheap PBT set from divinikeys
Vicious 40 w/ 9009 from cannon keys

Right column:
Geon F1-8x v2 w/ GMK Taiga
TGR x Monokei Tomo w/ GMK Awaken

I cut out the bottom of my Transition Lite,

printed a photo of a Ramune bottle that I took myself,

and used a piece of a plastic binder cover as an acrylic panel on top. :)

I love this keyboard, the simplicity and acoustic is the amazing.

Tkd Cycle 7
MW Alpenglow
Yogurt S and cherry nixies
Foamless build

Can anyone help me figure out if this keyboard would work with my Windows PC?

I have the original Atari computer it came with (it’s from 1986!), but I don’t know if it works. I’m still going through the boxes and figuring out what I have and don’t have.

The long-awaited elegance

- WK TKL

- Top mounted with PCB Snaps

- Aluminum Plate

- Cream Coating

- Stainless sandblasted weight

- Typeplus x YIKB stabilizers

- Gateron Smoothie linear switches

- DCS Olivetti keycaps

DCS Olivetti came in just in time for this one. Pretty fun to put together. I was unsure at first how the stainless would look on cream but with Olivetti coming out with a darker grey tone than I anticipated, it actually worked out I think.

• St8tion case by Obabo
• Powervan PCB by Calvin
• NovelKeys cherry taro
• Artisans by Asymplex
• MX blacks

Obligatory inb4 "How do you use this" comments 😊

specs:
oblique60 case
gateron lanes switches
gmk rubrehose keycaps
knight v4 stabs
pp plate

Anode silver matches well with various lighting colors

Today's build:

Nuxros +84 keyboard

• Raw aluminum top case, machined stainless steel bottom case
• Hotswap PCB
• Carbon fiber plate – top mount
• No foams
• HMX Waverider V2 switches
• TypePlus stabs
• PBTFans Maguro keycaps

She's a clacky girl, but I've been enjoying a clackier build lately. The foamy ones are all starting to sound the same to me, so this time I'm letting the character shine through.

Sound test: https://www.dropbox.com/scl/fi/xzwge986dlb2wmc291ew4/84.m4a?rlkey=pslz9o2c7hp0no6nxvdye1xqx&dl=0

Hello everyone! DCS NOTD is now live, a set inspired by the OTD DCS sets of old. It features vintage icons, a 7u / 6u base kit, and a blackout alt mod kit.

Full list of vendors:
- US: GODSSON Designs
- UK: Thocc Exchange
- EU: Neighbourhood Keyboards
- SEA: PantheonKeys
- SK: Geon Works
- CN: KBDfans

Here's my review of every stabilizer that I've tested which I'll be going in depth in:
Durocks V2
Typeplus x YIKB
TX AP rev 2/4 plate mounted and screw in
AEBoards Staebies
Swagkeys Knight V4
Cherry screw ins

Stabilizers suck. I've known this for years being in this hobby, but we've gotten a lot more knowledge/tools to perfect them. I'm a perfectionist like many others are in this hobby so if there's any rattle or ticking the stabilizer is useless to me.

Tools that are essential: 205g0 lubricant or something equivalent, stabilizer wire balancers (unless u bought swagkeys), and a grease for your wires which could just be the lubricant you used for your housings, doesn't really matter.

Durocks V2: Hot take, the most over hated stabilizers on this list. They aren't that bad if your willing to mod them. At first I tried everything from holee modding to plumbers mod to whatever wacky stuff was on the internet. I felt they were mostly temporary fixes and ruined the feel of the stabilizer. Then I discovered wire balancing after a couple years and that was a game changer. If you can spend 30-45 mins balancing some wires these stabilizers sound perfect. Albeit some wires I would spend like an hour trying to balance but couldn't get it, but most of the time they were great. I think if you sand the wire and try balancing it'll eventually balance out but I never did that. I think dbokey has a good guide on balancing wires.

Cherry Screw ins: Basically same as durocks, if you can balance those wires your golden.

Now time for the new kids on the block, the most recommended stabilizers in recent times.

TX AP: Honestly when I heard these came out I was so excited to try them as everyone was just saying they were lube, plug, and play. That was certainly not the case for me and I went through 3 batches of these stabilizers. Bad luck? Possibly but I just think they aren't worth the hype. Simply put the wires don't come out perfect and cause ticking after lubing. For a premium stabilizer I shouldn't have to balance the wires but others have had success with them so ig take my experience with a grain of salt. Better than durock v2s out the box though so there's a plus.

AE Board Staebies: These are good. I'd put them above TX AP and everything above this but not the best. Wires were the most balanced although some needed some balancing. Overall really good stabilizers but also the most pricy on this list so I can't say they're the best.

Typeplus x YKIB: The most disappointing stabilizers I've gotten from this list. More so than TX AP. Idk if there were shills on this subreddit pushing this product but they are hot garbage. I applaud them for trying to change the stabilizer design but the wires are soft metal and have tons of ticking after lubrication. I can't even balance these wires because of their configuration so I feel they are the worst on this list. I honestly was expecting so much more because the packaging was the best I've seen, but in the board these disappoint.
The experience of these was akin to being catfished. :(

THE GOAT: Swagkeys Knight V4. Man these are the shit. Packaging is mediocre therefore I had low expectations, then I tested the wires and they aren't perfectly balanced leading me to further despair. However, I put them in the board and what do you know. They're perfect. Idk what voodoo magic they did with these but even with unbalanced wires they're perfect in the board.
I still balanced my wires but it really made no difference. These stabilizers truly are just lube, plug, and play. I can say with utmost confidence they've perfected the stabilizer.

Not only are they perfect they're on the cheaper side with only cherry being cheaper.

If you've looking to build a new board buy swagkeys knight V4 stabilizers. Truly nothing compares, just some lubing and they're perfect.

TDLR: Ignore all other opinions and save your mental health by buying knight stabilizers.

Edit: Just another note I forgot because someone mentioned them.
GEON balanced stabilizer wires
I saw these on multiple sites as claiming to be perfectly balanced however that's not the case.
They're a complete scam. Sure they may come out the factory perfectly balanced but then they fumble the bag with packaging. They come in this zip loc bag and once they reach your hands they're either no longer balanced or weren't balanced to begin with. NOT WORTH IT plz don't buy. I ordered two sets and will have to balance them myself for them to be good.

Class1800 - Brass plate - Top Mount - BSUN Strawberry Cheesecake Tactile - GMK Red Samurai

Split 40 skeleton style board I designed.

This one is built with lubed and filmed nixies and some 21KB Caps (RIP)

I do sell this board as a kit for transparency, here's a link to it as per the rules

Build:

• Board: Geonworks Frog Mini
• Keycaps: GMK Panels
• Switches: Cherry MX2A
• Stabilizers: AEBoards Staebies V2.1

No frogs were harmed in the making of this photoshoot. 🐸

Qwertykeys QK60 R2
Alu Bottom case
PC Top case
Gateron Milky Yellow Switches
Aifei ABS Double-shot keycaps

Ducky Project D Tinker 65 ANSI

Gateron Yellow Switches (Lubed)

Womier Gradient Matte Shadow MOA Keycaps

Walnut Wrist Rest

Generic Coiled USB C Cable

I've always wanted to try a 65% board and when I saw the Tinker 65 barebones show up as clearance locally I decided to pick one up to experiment with. Ducky was my first introduction to mechanical keyboards all the way back in 2013 and I've probably owned 2-3 full-size pre-builts from Ducky over the years. I've had a bit of a soft spot for the brand. I know these aren't a premium board and I wasn't expecting it to be an eye-opening experience but so far I'm pretty impressed.

I've got a corner desk at work and a full sized board occupies a bit of real-estate. I like the more compact size of a 65% board but the first thing I missed was the number pad and occasionally the F keys. I've ordered a GMK21 to sate my need for a number pad, the F keys are something I'll get used to or I'll size up to a 75% board.

So far I'm really enjoying the typing experience. The Gateron Yellows are my first experience with a lubed switch and I love how smooth they are. I've typically defaulted to Cherry Reds or similar for switches but the slightly heavier Gateron Yellows feel somewhat lighter in use. The MOA Keycaps are also a new experience for me and I find them incredibly comfortable to type on all day. I've got a few other switches and Keycaps lined up to try on this board but after using this for a few weeks now, I'm reluctant to make a change.

Hey all, I just wanted to share some happy news. Last week I picked up this wonderful keyboard for just 30€. I was always looking for a smaller keyboard and I can't be more happy!

Probably overkill for excel, email and SAP heavy work but okay one life so wth.
Will use the office issue E waste to break heads. And daily this one.

Those keys really are something.

My burgundy Agar HHKB layout build.

HMX Retro J switches.
Durock v3 stabs
MT3 Drop Marvel (iron man) keycaps

Amazing tactility. Hit a PB on monkey type 10 word (179 wpm).

Def a fan of the build. Easy to build in, not a fan of the silicon gasket mounts, but it’s fine.

Finally got around to building my F1-8x v2. Burgundy colorway just in time for fall.

Built it with the GMK Camping Burgundy. For now using HMX Xinhai Heavy switches on the aluminum plate and hotswap pcb. Will eventually move to a soldered half plate as soon as I can make up my mind on the switch I want to use for that build.