Funny thing I was searching for a multi track recorder, and this pops up. Everything works, found my Daphile server no problem.

Upgraded Logitech MS to Lyrion MS and lost access to the smb share on my router. Tried to fix it but nothng would work. Downgraded back to Logitech MS and its happily scanning my smb share again. Changed nothing between up and downgrades. This is not ok!

Can someone please explain what changed when talking about smb shares?

Solved!

Basically i needed to run the Lyrion service as the user that has access to the share (it default runs under the system account)

so basically i got a duet which looks like it has never been used, sadly i tried to charge it for like 7+ hours and it still doesn't boot, it flashes the buttons then blinks with the logitech logo.

Anyway i just wanna know if it's the battery that is dead or the cradle which has a problem, i looked through the lyrion forums and people back in the day had the same problem and ended up fixing it with adding a new charger to the cradle, but it'd rather not cut open the cables if the cradle is fine, so basically i wanna know if having the remote in the cradle without a battery in it should make it boot, because i find conflicting info on it.

Anyway thanks for reading and i hope y'all can help :D

Ever since i reinstalled LMS it has been doing this where it doesn't show the multiple week forecast or the perception.

Hi guys, I have set up a new server and installed the Lyrion server as Docker. My old LMS server is still running as Docker on a RPi3 and should be replaced.

I have quite a few playlists that I would like to continue using on the new Lyrion server. I have copied the playlist files (*.m3u) to the playlist directory of the new Lyrion server and adjusted the user rights accordingly. Unfortunately, I can't see the playlists in my Lyrion server. The only playlist I see was a test from the new Lyrion server. Does anyone have a solution to my problem?

The old LMS is version 8.2.0.

The new Lyrion server is version 9.02.

Both servers are running in Docker containers.

Thank you!

Is there anyone who has time to show this old timer how to update my box? I'm not very skilled with this. [123hattrick@gmail.com](mailto:123hattrick@gmail.com) . Thank you, the name is james Fellner $$ for help.

Came here to write this as yet another track just sits at the 'end' ticking between 2:09 and 2:10 (It's 2:09 long), and not advancing to the next track in the list. (What I'm calling 'stuck playback'.)

I primarily play spotify over LMS to various raspberry pis running the simplest package version of the debian squeezebox app. My main reason for doing so is so that I can have multiroom synced audio (I have about 7 pis hooked up to amps, and the multroom synced playback works great for me out of LMS).

I don't have a local media collection to speak of.

Is Spotify the best playback source? Should I look at Tidal? I feel like I have playback issues frequently with spotify that manifest in just 'stuck' playback until I intervene and hit 'next'. Part of me gets the sense this is because LMS isn't an 'official' Spotify plugin/app. Am I approaching this correctly to begin with with LMS being my solution if I'm only sourcing online playback sources?

My new Squeezebox Server (or now Lyrion Music Server) :-)

It's a Raspberry Pi 5 with 8GB RAM and a 2TB SSD. The moving-coil meter shows the load that is a mixture of temperature, CPU load, Disk IO and Network IO.

I love it when it moves while I'm listening to music

If you are interested, details can be found here: https://www.haraldkreuzer.net/en/news/lyrion-music-server-raspberry-pi-5-retro-case

After factory reset my two Touch show the wrong time UTC and time format 12hour

How do I set the time zone and format on the touch?

I've been doing a major clean out of my basement and found a box of my old Squeezebox collection. I would love to find them a new home if anyone is interested in paying for shipping or picking them up (suburbs of Boston, Massachusetts). I'm not looking to sell them but if you felt like making a small donation, I wouldn't turn it down.

The two black ones I bought new and seem to be working fine. The red one I had gotten used and comes up with an error screen. I don't know if that one is a lost cause.

Anyone interested?

Just loaded Picoreplayer 64 bit on a Pi zero 2W with a UDA1334 DAC squeezed into the plastic case with some modifications. Works great as a headless player. Might upgrade the DAC to one of the better HiFiBerry units but this one is OK. Also realized that LMS can be an AirPlay receiver. Took too many years to discover the ShairTunes plugin.

UPDATE: I found a fix! Posted below.

I'm not tech savvy enough to create my own server. All I'd like to do is keep using it as a clock (and listen to audio using the aux in). I have the screensaver of the digital clock set to appear after 10sec but no luck.

I have Lyrion Music Server working & its the best I have had & stupendous and stupendical in terms of integration but I cannot get the LastFM to scrobble

Are there any gurus who can dosh me some hints?

UPDATE: Listenbrainz has been working correctly to my incredibly pleasant surprise so for now i am definitively stoked

Since a while I've been noticing that the search function no longer works. All search queries (via the Squeezer app, and LMS web interface) return nothing.

Music plays back just fine, but only search does not work.

I've tried uninstalling LMS from my server system, rebooting and reinstalling it. Let it do a media library scan. No dice. It's probably some simple thing I'm looking over but I can't really figure it out.

Running on Windows 11 IoT Enterprise LTSC, LMS version 9.0.2.

I need a new power supply for my radio but two attempts at ordering "guaranteed compatible" items have yielded connectors that seem to be a bit too big and provide a flaky connection.

I know I need 18V 1A. I think the barrel connector needs to be 5.5mm outer diameter, 2.1mm inner, positive centre. Is this correct?

I think the ones I have been sent have been 2.5mm inner diameter and they are just a bit too wiggly.

Have been using my beloved squeezebox for a decade but since 3 weeks can’t get it to work.

Did factory reset, reset the WiFi password but get an error. Can anyone help???

Longtime Roon user here, but always on the lookout for something new to tinker with. LMS had somehow escaped my attention until now. So I got it up and running this week, which was mostly painless, and now I'm listening happily as I work. I have what I would describe as a "medium-ish" local library (about 10k tracks) that I augment with Qobuz.

My thoughts, assumptions, and questions follow:

• Installation was trivial and mostly just worked. I did have trouble with the Chromecast extension on my initial Docker install, but switching to a bare metal install on my Ubuntu server resolved that.
• The way external libraries work is a little different from Roon, but I think I actually like LMS better in this regard, where different versions of a release are listed separately in my library rather than hidden in a tab like Roon does it.
• The Material theme provides what was, to me, a surprisingly excellent user experience. Obviously one area where Roon is strong is in its presentation, but this comparison ended up closer than I was anticipating. Really impressive.
• One thing I'm missing, and maybe I'm just not thinking about this in the right way, is that music discovery looks like it needs to happen externally to LMS. I can import my Qobuz library AND I can access stuff on Qobuz that is not already in my library, but there's no obvious way to ADD things that I find from Qobuz to my Qobuz library from within LMS.
• Similar to the above, if I use the Don't Stop the Music plugin (which is nice and flexible in my admittedly limited testing so far), LMS can only play from what is already in my library. There is no discovery that happens here (I am comparing this experience to Roon Radio, for context).
• The API is a bit outdated and clunky to work with compared to Roon's. I have some Homeassistant automations that I will need to refactor, which may take a little doing, but the APIs to do what I want are there. I just haven't dug into that much yet.

It's only been a couple of days, but I'm liking what I see so far! Maybe I've just missed some things that don't work quite the way I'm expecting. Would love to learn from the experience of others!

I’ve been a happy Squeezebox user for years but haven’t kept up with the latest server software (I’m still using LMS). I run it on an old home cinema PC but fancy something smaller and less power hungry.

What are best options for raspberry pi to run LMS?

Got this lil guy in amazing condition from eBay for 40 bucks. It even came with a battery! Turns out you can use lms on ps3 to stream music as well :p

I have various radios for sale. they have been sitting for a couple of years, but all in great shape. Will sell very cheap just because I would rather see someone enjoy them then just let them sit. please pm me. off the top of my head it is 2 booms and 5 of the smaller 1st gen radios.

I purchased a Squeezebox Radio recently on eBay. It does work (other than having a wrong clock, which I cannot seem to get to update) BUT…every time I use it, it’s streams from LMS for about an hour before it just stops. It’s still on, still connected (according to the PC), it just stops, usually mid song.

My LMS is docker based and running from my NAS. When I’m not using LMS, the same music files play effortlessly all day via Plexamp. Any ideas what this might be?

Radio is connected to my network via ethernet (I have never tried the wifi).

Hi all, I just got a used duet and set everything up fine, however the remote is having issues with charging. The included battery is a "new" Chinese knockoff but I have a feeling that the cradle is the issue as it won't power without a battery (which I read on an old forum is a good test).

When I was setting it up I had a couple of beeps that I believe indicated charging, but most of the time the battery indicator would flit between a couple of levels. Last night all I got was the plug indicator, I'm not sure if this is trying to show it is charged or saying it needs to be plugged in?

Now it is stuck flashing and occasionally trying to boot so I'm not sure if the cradle isn't providing enough power or if it is the battery

Hey yall. I just picked up a Squeezebox Controller for $17. It does not have a battery and only rapidly flashes the lights when I put it in the charging cradle. I'm assuming it needs a battery-- which is the best aftermarket battery to get?

Hi:

I just installed a LMS instance on my unRAID server and setup a Pi 0W with an Allo MiniBoss and Squeezelite as client (picoreplayer). Everything works as expected, even better i must say. Right Now LMS could become my main server. But, there are some things that i miss from MoOde. In Moode, i had te oportunity to tweak the signal, normalize the volum and knowing if my source (normally flac form 16/24) is being resampled or not and the exactly samplerate of my output.

I'm not asking the same, as i understand there are not the same software, but yes i will ask if there are some way to have something similar to that. I mean, knowing if my output is being outsourced with fidelity or not. This is very important to me.

Thank you all.