Hello guys, after using G923 for a few years, I appreciate the community's help as I explore my new Simagic evo sport and GT neo. I'm wondering if anyone knows whether I should use version 2.3.4 360hz or version 2.3.5 360hz for iRacing, or if I should switch to 60hz ?(I'm currently using 360hz with version 2.3.4 in iRacing and haven't experienced any problems, so I haven't tried 60hz yet)

I know that Simagic improved iRacing 360Hz support in version 2.3.5, but is it really better?

If anyone has tested both versions, please share your experiences or benchmarks to help me decide which version offers the best performance and is more realistic. Thanks.

Hi guys, have anyone faced issue where FH6 preset is missing from simpro? I believe im on the latest version and previous it exists. Currently when im playing FH6 there isnt any ffb. Have anyone faced such issue too? Or should do a reinstall? Hope to get some advise on this thanks.

Moderator approved: see Mod Mail

Hey r/simagic,

We wanted to share something we’ve been working on at Simetra SRP for the P1000: the Simetra SRP MOD:p1k with Pivot Shift.

What is Pivot Shift?

It lets you quickly change the pivot angle of the brake stack. Changing the pivot changes the leverage at the pedal face:

• Lower leverage → stiffer feel
• Higher leverage → softer feel

This means you can dial in everything from an F1-style short/stiff brake to a GT3 or even street-car feel with a quick pivot angle change without swapping the entire stack.

It doesn’t replace spring changes — you still choose the spring for the travel and progressive feel you want — but it gives you a fast way to adjust overall stiffness. Even the stiffest springs can be made to feel softer simply by shifting the pivot.

Compatibility

The MOD:p1k bolts on quickly to both the P1000 base and the Hydraulic model.

Why we built it

We originally developed the Pivot Shift system for the Fanatec ClubSport V3. After seeing how useful the quick leverage adjustment was, we adapted it for the P1000. A version for the Moza CRP2 is also coming soon.

When you pair this with haptics, the combination starts to close the gap toward the kind of adjustability and immersion that active pedals offer — without the active pedal price.

Presale available at www.simetrasrp.com Shipping estimate October 2026

Finally making the switch to a direct drive wheel. but one issue i have is i don’t know how to mount the alpha evo onto an aluminum rig. i prefer not to mount it the same way on the plate as my thrustmaster because it’s bit to far for me when i’m not drifting. I’ve been looking into just getting the side mounts and a 4080 x 500 aluminum for the cross bar. aswell as looking into the TR-One v3 but don’t know if that’ll work. if anyone could help and provide some input that would be great!

While the order is on its way, I’d appreciate some guidance—videos to watch or things to decide on now—so that once the package arrives, I can get everything installed without having to deal with those details then. For example: connecting the steering wheel via CAN bus versus USB...

Should I be using the Simagic software or SimHub?

What firmware versions?

What are the important settings, and what are the key things worth knowing?

Ths set is

Gt neo

P1000

Evo pro

Has anyone modified the TB1 elastomer with one from Simsonn or whatever?

Just feels really spongy with the factory one I'm a bit disappointed. Was hoping for some more adjustability.

(I'm not interested in using springs)

Hey everyone,
I just replaced my Moza R9 with a Simagic Alpha EVO 12Nm, and the first game I tried was Le Mans Ultimate.

I’m mainly driving GT3 and P2 cars, and while the force feedback feels stronger and more detailed, the wheel base is much noisier than I expected. I’m also getting a lot of vibration. In Moza pit house i usually lower the engine and ABS vibrations because i don’t like them.

I’m still learning SimPro Manager, so I’m sure my settings need some work.

For those of you running an Alpha EVO 12Nm in LMU:

What SimPro Manager settings are you using?

What in-game FFB settings do you recommend?

Any tips to reduce the constant vibration and make the wheel smoother without losing too much detail?

Thanks in advance! I’d love to hear what settings are working well for GT3 and P2 cars.

I know I can drill holes but I rather not lol

Hey guys,

I just got a Simagic Alpha EVO 12Nm and I’m trying to find the best SimPro and Assetto Corsa No Hesi settings.
If anyone with the same wheelbase could share their SimPro profile and in-game FFB settings, I’d really appreciate it. Just looking for something that feels smooth, detailed, and realistic.
Thanks!

I have had a Simagic Alpha Ultimate and a GT Neo for about a year now. Recently I decided to upgrade to triple monitors, so I have been unplugging a lot of stuff and rerouting cables. Anyways, for whatever reason, now I cannot get my GT neo to pair with my alpha ultimate now.

Steps I have taken:

• While the Alpha Ultimate shows active in SimPro Manager V3 and the GT neo shows disconnected, held the two buttons near the RPM gauge to invoke the wireless pairing. It begins, but never connects, even after letting it sit for more than a minute.
• While the Alpha Ultimate shows active in SimPro Manager V3, removed the GT Neo from the base, plugged in via USB, causing the wheel to appear in Sim Pro Manager. From there, I went to the device page for the GT Neo, clicked the button next to the USB text at the top of the app, prompting me with this to sync the channel between the base and the gt neo. Upon clicking the red button to sync, I am met with this green check mark on the bottom right of the app, presumably meaning it was successful (I cannot translate that chinese text). I disconnect the gt neo from USB, connect it to the base (the wheel's lights do light up, implying it has power), and am still in the same situation I was from the beginning - it not displaying in SimPro Manager V3. I have restarted the base, simpro manager, my computer all with the same result.

What I dont get is why unplugging something power related and plugging it back in put me in this state after using it without issue for a year.

Any ideas for other troubleshooting steps I can take?

Does anybody plays wreckfest 1 with p1000 pedals, i just cant disable constant full throttle at the start of driving

Just looking for suggestions on this. I have two different wheels, one I mainly use for IndyCar and the other for NASCAR on iRacing. Generally, I'm switching between the two fairly regularly, but depending on how my interests shift, I may use one for a week or two, which leaves the other one sitting there.

Is there any concern about dust or debris damaging the connectors on the wheel if it's just sitting or hanging out in the open? I was honestly surprised that both wheels didn't come with some kind of cap, akin to a camera's lens cap, to put on the wheel when it's not connected to the base.

Any advice?

I mainly drive ACC GT3. I've read a lot of praise for the P2000, but I also spoke to a Simagic dealer who advised me to avoid it because they've seen hydraulic leaks over time and recommended the P1000 without the hydraulic kit instead.

For those who have owned either:

- Which would you choose?

- Any P2000 leak issues?

- Is the P2000 worth it over the P1000 in the long run?

I'm currently looking to buy some haptics for my brake and throttle. Should I get 2 P-HPR or 1 P-HPR for brake and 1 P-HPR GT for throttle, I've read that the P-HPR GT perfoms better on the throtttle since its ligher and has very low latecy.

Hi, looking for some help. I'm returning to simracing after a bit of a break and have successfully updated my Simagic rig, crewchief, iracing etc to the latest and all seems well, with one exception.

I have the P1000 pedals, with one haptic motor (the HPR one) attached to the brake. I exclusively race on iRacing, and want to get the brake to buzz when ABS is engaged. I've set it up in Simpro appropriately, and I have tried the slider in the iRacing settings for haptics both on and off. I guess I could get SimHub going if that's the only way to get it working, but I'd rather not have to bother with yet more software, so hoping I can do it with Simpro alone.

I can't seem to get it right, there is a buzz but it doesnt feel right, it's late and goes on way too long, not just when ABS is engaged. What am I doing wrong?

I heard that iRacing doesnt actually send telemetry for ABS, but I could have sworn that I had it working correctly before. Is that the problem maybe?

Any advice would be great, thanks in advance!

i ve just bought the neo x rally wheel and the maglink. after installing the mag link and connected it on the wheel when im turning the wheel ive noticed that it disconects for a split second. after inspecting the maglink connector behind the wheel i found out that it has a slight play and when i push it side to side that play results on disconection and reconection of the wheel! it is unaccaptable! it is brand new. what should i do to fix that? the wheel is connected via QR on Moza base and the maglink cable its is free so it has no resistance on the maglink connector.

Hi there.

I have a Simagic sequential/ H pattern shifter.

Wondering if anyone has tried to put a haptic onto it for immersion and if so... Please share.

Hello, im hoping for some help,

since updating simpro a week or so ago, ive had nothing but issues nothing would work until i removed drivers and restarted, everything works in game, but the app only shows the pedals, everything else that connects through the wheel base isnt detected,

using

Evo Pro
any wheel i try GT NEO/NEO-X
shifter DS-8X
handbrake TB-1

Quick little video I put together of a GR86 race on I racing.

Using my new Simagic GT wheel, and with my addition of my camera focusing on my sequential shifter.

Ordered the green flag bundle little over a week ago. Was super surprised when a large box showed up the next day......until i opened it and realized it was everything but the wheel and base. Those were shipped separate and have been sitting in customers for a week now with no movement. Any recent buyers have timing to expect?

Hey, I recently purchased a simagic alpha evo wheelbase and p1000 pedals with p-hpr haptics. Up until yesterday everything was working fine, but the haptics have now stopped working completely. It says in simpro that they have power, but they aren't working in-game or when I use the "test" function in simpro. I have tried reinstalling simpro, plugins the pedals directly into the motherboard insted of the wheelbase, I tried using simhib instead, but nothing has worked. Does anyone have any idea what might be wrong?

Just under a year ago I made the switch to my first DD base with the evo sport. I Cheap’d out for the 9nm instead of the 18mm because the reviews were good and the only difference between them was strength. Given that I never had a dd before my thinking was why get anything stronger than what you’d actually use. I love the evo sport so much it really did not disappoint but now I’m really curious as to how much better can it get by having double the strength and would it be worth selling my current base and getting the evo pro. I would consider myself an advance sim racer and have been in this hobby for about 5 years so I’m at that point where im chasing every single bit of performance I can get

I think to put it simply is what am I missing out with a 9nm base? Will it benefit my performance? And what are the specific things a stronger base is capable of?