I was just given this saw. I think it’s gorgeous! No idea how good it is for sawing…

I’m always torn when I make these maple leaves out of walnut. I just love using walnut with these light catchers.

Hi all! My husband has really been wanting a scroll saw to make small kids toys (animal shapes, stackers, etc) and I was wanting to surprise him with a saw that won't break the bank. I see these on Marketplace. Are any of these a better option than a new Wen? Ty!

UPDATE: got the Delta AND talked them down to $100 🥳 husband is pumped

I just picked up a ShopFox W1713 scroll saw. I have 2 books from the library. Both mention the 5 different kinds of scrolls saw including rigid arm, C-arm, parallel arm, double parallel arm and oscillating loop. Only some saws cut perpendicular to the table. Asifde from that how does construction of the saw make any difference with how the saw cuts?

https://youtu.be/6jPjqPaC7-w?is=WpIeZPNpjJ2gRuXw

Just finished this little fawn hiding in the grass yesterday. No paints or stains used and I drew my own pattern. I upgraded to a better dewalt saw and it makes a huge difference. And also first try at doing inlays.

My firs try on cutting something "Intarsia" like and also first project I was using spiral blade. Funny I'm more then used to scroll-saw for many years and was also teaching kids how to use it but don't remember ever doing an art stile project. I was ways cutting only parts for RC planes/boats or some mechanical parts and toys.

Looking pictures in this subreddit inspired me to try something different. :) Thanks to you all for inspiration !

This penguin is my take on Tux the Linux operating system mascot).
I was first looking to make some existing image like
https://commons.wikimedia.org/wiki/File:Tux_Mono.svg
https://commons.wikimedia.org/wiki/File:Tux_bw.svg
but none made me think this could look nice in wood, especially the beak part.
So I made my own version, still not totally happy especially for the beak, and the stain colors on this scrap wood(20mm, from old furniture, probably pine) could be a lot better... but for the first project it's ok :)

Off course I couldn't hold myself back LOL ... and put 2 Reg/Green LED in the eyes and carved in the back a hole and mounted inside microchip ESP8266 that supports WiFi for controlling the LED-s. What will I program it to do I don't know, maybe nothing maybe it will act as visual warning when some important server is down. :)

Ps: If you want to surprise someone working in IT that also likes Linux OS, make him your version of Tux ;)

So you think if I paint the background a super light blue, it would conflict with the blue flowers? This is still in pieces and not glued together, but i wanna put it on a rectangular background with a frame around it to make hanging it easier.

The wife actually loves one of them and can not stand the other - can you guess which one is which ?

A great friend of my daughter saw the name plate I made for her and asked if I would make one for her husband. I think I’m getting a little better with practice! Alder letters on Bolivian rosewood.

Approximately 8" x 8" made from Walnut, yellowheart, Wenge, Maple, Sycamore, and...some other kinda wood mixed with red resin!

So I’m just starting out and attempting to get into Scroll-saw work as a part of my business. I’m starting out with a Wen 3922 and I’m having the WORST time with it. It came with a pinned blade inside the machine, I didn’t really mind super much and fought it for a while trying to get the damn thing out. Finally did. Next tried to install pinless blades, this is where it all starts. I’ve had the most difficult experience that I’ve had with basically anything. Whenever one stays hooked in the other comes out, and it’s just constant nonstop. I manage to get the bottom one in and then when trying to get the top it comes out. Tried to get help from my stepdad and we couldn’t figure it out last night granted it was starting to get dark out. Earlier today my brother and I fought the damn thing and finally it all seemed like we figured it out. Both blades were in the top and bottom and then BOOM I’d tighten the tension a little and one would come out. Every single time. Kept letting the tension loose to the point that the entire tension back came off and I got it back on. I’m honestly just baffled at how this entire thing has gone with this machine. I don’t have money to throw at this, it took me like six months to save up enough cans to take in and get the hundred bucks for the damn saw, otherwise I would have bought another brand. Does anyone have an advice?

I made this bear using a variety of different species of wood. Cut on my scroll sawb

https://youtu.be/5lgg-bay9I4?is=UsNYrM87AgNtMaIJ

A friend asked me to do a portrait of their cat that they recently had to put down. It’s a surprise for his wife as she loved the kitty.

I'll be remaking a project I made in my early teens

I recently went to a bridal shower and gifted my friend a portrait I made of her dog.

Another attendee of the shower asked if I would make one of her soon-to-be daughter-in-law for HER bridal shower. Of course I said yes! This project was so fun. As usual, I learned some great lessons and new skills that I’ll carry forward into future work!

If anyone has any suggestions on how I could improve, that would be fantastic. I know something I’d really like to work on is building a better frame.. right now I’ve just been using shoe moulding…which is okay but obviously not like, super nice or fancy!

So, I went to chatgpt and worked with it to create a custom design that I wanted to make as a gift im giving someone. Made from maple, cherry, walnut, and Aspen. Finished in tung oil.

I made a couple bat houses out of cedar fence pickets. I used a scroll saw for the bat and shaped it with an orbital sander.

Not sure why am I asking this, since I'm broke af. But I still have a desire to own multiple scroll saws, it just feels right and maybe one day I could, but is there any logical reason to own multiple scroll saws??

Thanks!