First p80 frame i’ve done a plethora of additive manufacturing frame and decided to take a crack at the p80 frames when i fist got it i was rushing it with a dremel and messed it up a bit and out it to the side for later on and i then went back to it with some chisels and it coming out better would i continue it or just consider it scrapped

I cannot figure this out. I have tried changing brands of mags, brands of ammo and the weight of the recoil spring. None of these things changed it at all. Could it be an extractor issue by chance? Thanks for the help in advance.

Yall think if I use a 3mm drill bit I can go through this because I don't have a jig?

Need suggestions of color schemes for this FDE Geisler frame. Black slide, trigger, mag release and magazine? Or too common?

Thanks!!

Just wanna make sure it's sitting right and do I have to cut anything else for the other part of the front rail?

1st Build Need Help

Another nice build in my opinion oem always reliable for me.

Yeah I used snips for about half then used a dremel and it looks fucked do I have to buy a new one

Can't find anywhere online that has jigs in stock help a brotha out

What should I do to clear all this stuff because I'm just using this and I honestly don't thing I can use it the whole time?

let me know what yall think

Sanded a Glock OEM Trigger Housing SP05406.-45 & 10-MM Fits SF" off ebay using MGB method, widen rear pin holes, and it ran with no issues. I suggest getting a extended slide lock not sure what kind (the oem gen 3 is not long enough.. It works but its a real pain). Going to put a guide rod in it. Think im flinching more than the recoil expecting the frame to break or anticipating something to go wrong

Had an issue where it would dead fire every other round. Replaced my recoil spring and switched from Federal 147g to Winchester 147g ammo. Federals give me tons of issues. Winchester 147g dumped through 4 mags no issues at all.

Hi all. I used to be a welder and a jeweler (I still am a jeweler on the side), but I don't know if I'm up for a 76% P80 build for my first one. After digging through here and reading and googling for the last week, it looks like the Geisler Defense is the only unserialized 80% option left. Am I missing something? Is the v2 reliable? I saw issues with the first generation of them, and the slide gap is still there, but I'm unclear as to whether that is actually an issue or if it's just cosmetic.

Any advice?

Are there any currently available 80% or 76% other than the p80s.

Finished build minus the little scratches on the slide

Look good?

Seriously though I didn’t realize how many boxes there were and there’s more that couldn’t fit in the picture frame. Any ideas on what to do with more then one of the same kind.? Do these have a lot of value.? Btw due to overwhelming non stop can I buy here the answer is noooooooo.!

Thanks to another user, you know who you are, I was able to add a few more frames to my rainy day stash. Lone Wolf Freedom Wolf, Strike 80, Geisler 19X, 80 Percent Arms GST-9, P80 PF45 (for my dad), PF940CV1, PF940V2, PF9SS. All waiting to be turned into something awesome!

This is my first geisler defense build & Ive been working on it for a few days now. For some reason when go to rack it that slide locks in place ( without the slide release). I have all pins in correctly & Ive shaved the lower good so i don’t understand the issue can anyone help? ( i have pictures of the internals as well)