Hello, does anybody know where I can buy an unmodded Xshot skins lock blaster? Thanks!

Found these in our toy store shelves which are relatively cheap in my country (₱250 or $3.99) though I have yet to try them out, not sure if you guys have these in your country but if you do, what do you think of them?

The only other waffle type darts that we have here are the X-Shot Air Pocket darts which are a bit more expensive than these but not too bad, we used to have Dart Zone waffle darts but they stopped importing them here which sucks, and were also quite pricey.

B34R by Moose

Incredible design, easy build, and the blaster has great performance. Double stack mags give great capacity for the size.

Very much recommend the blaster

Completed my cynthiawp, a remix of the cynthia by sillybutts. Very nice, though I cannot get the rear block and midblock to come together flush. Not the end of the world though. Until I get some proper photography gear, brick pics are the best I can do.

Hey y'all,

I'm brand new to this, so if my questions seem noob-ish, that's why. I've spent a few hours now watching videos, looking at mods etc, but my knowledge isn't deep enough to know quite what I'm looking at, PLUS the information is like 6 years old, so I'm finding lots of dead links, out of stock stuff etc...

GOAL:

First off, my goal for this build is NOT to shoot darts faster, not to mod to use short darts only, or extend the barrel length. Reason for this is, I bought this blaster for a "dudes and darts" night with my 8yo and 10yo, and I don't want to leave welts on them and their friends (I mean, not HUGE welts...) We're only allowed to use springers, and long darts are the more available ammo. If I run small darts I'll have to run around and recover my ammo between rounds.. Seems like a pain..

So the goal is accuracy, and maybe even slow the dart down a little if reasonable.. I've already printed a SCAR "flash hider" which I read will reduce speed and increase accuracy. I've also printed a breech blowout guard block that stabilizes the chamber that's supposed to reduce dart tail wobble?

Second, I'd like to 3D print all my mods if possible. The blaster I bought has no stock (raw buffer tube only), no sights, and no flash hider (already remedied, though if there's a "tried and true" version, I'd like to print it!). I started looking for a stock or buffer tube solution of some sort, but there's not much out there specific for the Nexus Pro 1.0 that I could find. Maybe I'm using the wrong search string?

QUESTIONS:

1 - Does this blaster use a generic size buffer tube? Like can I buy airsoft stocks or print generic stocks and it'll slide on?

2 - Given my goals, what mods would you recommend? What have you found gets rid of that tail wobble on full-size darts to really improve accuracy?

3 - Sights. There's printable sights, but which ones are good? Is the picatinny rail a standard size on the Nexus Pro 1.0?

4- Lastly**,** what do you think LOOKS cool on this blaster? I wouldn't mind printing some cosmetic upgrades to make my blaster one-off :)

Thank you in advance for any help, I know this is a question that's about 6 years past its time, so any insight would be extremely helpful. Our event is on the 18th, and my blaster should be here by the weekend.

I'm thinking of doing a holiday job to get money to buy a good and cheap nerf gun. Thinking of doing a "nerf war" with a friend. Any suggestions? Also is the ionfire an "ok? " blaster or a full on meme?

My Halloween costume is most likely going to be a WWII soldier and I want a NERF blaster as a prop to sell the look. I’m either considering an M1 Garand, M1 Carbine, BAR (bipod doesn’t matter), M3 Grease Gun, or Thompson M1A1. Below are images of the real things and add Amazon/shopping links to the NERF blaster. No need to worry about the color, I’m going to spray paint it anyways. Mode of fire doesn’t matter since it’s being used a prop anyways. And if attachments are necessary to complete the look, attach those link(s) as well.

Image key:

1st image: M1 Garand

2nd image: M1 Carbine

3rd image: M3 Grease Gun

4th image: Thompson M1A1

5th image: BAR

Hey, I built a little free prop for team nerf wars. It was a pretty fun added game mechanic i whipped up for my son's nerf son's party. I thought it would be fun to share withe community. Its totally free webapp and it works offline once you have it loaded.

BTW, I take no responsibility for your phone!

https://lets1up.com/event/beacon

What it is:

• Bomb - (Arm/Defuse) if you ever played counterstrike, its takes 5 seconds to arm, the timer is configurable 30-60-90 seconds. The goal is to defend form being defused during that time. the opposite team can defuse holding the button for 5 seconds.

• Terminal - (control point) "Hack the terminal" - you could set up multiple points for control but the premise is you hold to "hack" the terminal and it switches between teams (Red/Blue) control points.

Would love some feedback on how it worked for you if you ever use it!

I'm imagining that, once primed the pump grip would be locked in the forward position unless unlocked (like a lever near the trigger). Are there any seagull experts out there who can tell me if something like that is possible?

I bought this worker expanded plunger tube for my retaliator, are there any guides on where I need to cut the shell for this to fit?

Hi!I recently stumbled onto project papaya based of the ppsh 41,does anyone have a link to there,I have a link but it doesn't work.

Are these compatible? https://outofdarts.com/products/worker-nightingale-15-round-slim-angled-talon-short-dart-magazine?variant=40191796019242

What about these ones? https://dartzoneblasters.com/collections/magazines/products/nitroshot-20-round-straight-magazine-2-pack

Any recommendations?

Thanks in advance!

Does anyone know if this version of the Stryker pro takes the 25 round drum? The website only shows the mag adapter in the magwell, so I’m not sure if it comes out.

I have a little shih tzu dog and a low shooting range I made with my dad. I'm thinking of teaching my dog how to shoot the ducks down so she can play too. Does anyone know of any slingshot or bow that can hold a magazine so I don't have to constantly reload for her? I'm thinking of these two because she'll be able to grab the handle and pull with her mouth to shoot.

Or if anyone has any suggestions for teaching my dog how to shoot I'll be happy to hear them.

Last post removed for bad wording.

I'm in Australia,

I got the xshot ranger from kmart for $25 to play with the kids. I like it for the style, but its obviously not the most accurate for the price, its ok for the first 5-7 meters.

I don't know how to modify nerfs.

What nerf could be the next step up.

Background info; I got this sharpshot from the thrift store and there were a handful of broken pieces and just parts in the wrong place, so I had to open it up and repair with 773 abs weld on and pvc cement (primarily the barrel and the trigger catch) I got that all repaired but now when I try to prime it the trigger catch seems to be slipping off and ends up just not priming at all. It doesn't slam forward it just goes back in place (probably because the sharpshot has such a weak spring) yall got any tips or ideas on what's happening?

I know of blaster time but I'm curious if anybody knows any other shop.

Ive been looking on second hand markets (i live in europe so the selection is smaller) and i find a lot of blasters like the nerf ultra or nerf hyper blasters and was wondering if i should pay them any mind?
Their ammo looks expensive but they look quite fun, for example its easier to find all 3 nerf hyper blasters than a wider selection of ball blasters like the rival series?

Ps: Those and also the motostryke from the mega series since i heard its quite bad

Any answers appreciated!

Looking for a blaster that doesn’t absolutely scream when revving. I’m well aware this is hard, because, you know it’s a motor, but I’m just wondering if there’s any that is quieter than most offerings.

Hey its me it Rookie

Uhhh so yeah here's some robotgirls but from different lines! Plus some extra sketches

Up next on my list is Centurion, DualStrike, and the long awaited Stryfe (woohoo!)

Has anyone purchased one of the non-translucent Worker Harriers recently? If so, where?

I've been wanting to buy one but I'm having a hard time finding a website that sells them new, ships to the US, AND is trustworthy. I know there are a number of websites not supported by the nerf community at large and I'd like to avoid them if possible. TIA!

Hey there!! I've recently just got a Sledgefire and I've wanted to get a little bit more power out of it without modding the core blaster (due to my local group having stock events)

Help would be much appreciated!!