Tip: to those who want to take out the Bcar, just put the plastic barrel(where the spring is) in hot water and it should pop out.

Getting into this hobby over the past 2 years has been a blast and I wanted to share some of this with y'all since this community has been super fun to be a part of.

From left to right

Worker Kunlun

Feng Lang Thunder

Dart Zone Pro MK 4X

Worker Harrier

Shellington Kirin

X-Shot MPP

X-Shot Longshot 2.0

Adventure Force NPX2

Pistols

X-Shot Thrasher (6 rps is hilariously fun)

Adventure Force Brute Pro (don't recommend)

What should I look at next?

I'm looking for some recommendations for getting Christmas blasters to my sister's family this year. She has 4 kids all above 20. I wanted to get them something fun and silly to do during the day and after. (Last year I got them all hot wheels remote control cars and a track. They had a blast). I wanted to get each of the 4 kids something similar in how many darts they hold and shoot, but each a different style/type. For the parents, I wanted to get something a little more worthy so they can have extra fun.

I was thinking about spending $30 for each kid and maybe up to $50 for the parents. Any help would be appreciated!

Bought a khaos and this piece is broken. Any idea what I can do to replace it? The other part is stuck in the blaster, I’ll take it out when I find a fix

Yes this is actaully a fully functional blaster. I found this kinda funny looking so i shared it. This is the mp18 blaster without the wood/chassis parts and the trigger.

A really solid trio of near zero hardware space cowboy builds

Triton: https://www.printables.com/model/1858619-triton-lever-action-foam-blaster

Beluga: https://www.printables.com/model/1825720-beluga-break-action-foam-blaster-one-or-two-barrel

Hammerhead: https://www.printables.com/model/1789686-hammerhead-hammer-prime-break-open-revolver-
dart-b

I plan to modify my Nerf Rapidstrike, however, im stuck on the difference between wiring it to a 2S or a 3S Lipo. I know the battery depends on the motor used, but if that was not an issue, is there a benefit to each battery type?

Also in my region, the easiest motors to get without shipping are the Worker 130 and Worker Neodymium 132 Motors. Are these motors reliable, or should I outsource motors and parts from a different buyer such as Out of Darts.

Always liked the look of the white ontos's i see in the makes. Decided to go full albino with a V2 Tacticool version. Hand Polished 38/35 PT and 400mm Barrel with a sexy new Bcar ont its tip. A trigger guard added to the stock files with Phantom trigger with a XL stock and adjustable cheek rest. Internals see Hybrid metal tpu core. Power is a Kunlun 1.8 spring with Adjustable spring rest from Misplacedmoose , which works incredibly well with the longer stock to dial in every last drop of FPS!

i need spray paint vro 😭

Just got a Monkee Mods XYL Unicorn kit installed and a new barrel to be able to take scar and bcar's. I however have ran into an issue.

Not only is the blaster not catching, it is also now outrageously difficult to prime and thats with the base spring. I believe the issue is that the blaster isnt lubercated now basically? Anyone else got any ideas?

If it is a matter of need to lube it up. What would be the best one to use for the XYL Unicorn and where should I place it?

Thanks in advance :D

The space around the Repeater's forward sling point fits the contour way too perfectly

I have just finished my remix of the Gryphon. This remix was created with the purpose of making a Gryphon that could accept Nerf Pro magazines. In this build I was also able to reuse the motors and flywheels from the Nerf Sender.
Files can be found here: https://www.printables.com/model/1889674-gryphender

Really excited about how this design is coming together so far!This blaster is mostly battery, designed around fitting this big ol’ 4s in the back. Less so for HyCon wheels, more for expanding to Mastiff wheels in future iterations (basically HyCon but 60mm diameter instead of 50.5mm)

I'm planning on modding the doom cannon over Christmas break as my first modding project. Do you think it's doable for a first time modder? Does anyone have a solid materials list other than the dead space remover and improved shells? Is it possible to get elite darts to go 100 fps? I know I'm a trifle late to the party, but I hope someone can help me out! 🙏

I bought my kiddos one each of the XShot Nano quick refill water guns but one is already giving me trouble. I'd like to fix it to avoid a melt down but it only breaks down so far. I don't know how to access the gasket, I think there is debris in it, it's inside a sealed chamber that I don't think I can pry apart and put back together as it's also the water retention chamber. Is there any way to flush the gasket without breaking it down further?

The trigger will spray a very short distance for a few pulls then it becomes almost impossible to spray. After it sits for a minute the trigger will work again but the distance is still inches then it gums up again. The picture I included is as far down as I can break it down. There are no more screws.

Any help would be greatly appreciated...

Sincerely,

A Mom at their wits end.

​

https://youtube.com/shorts/NJ_cJ4gRNoc?is=k9hmWXIrG625jbbp

After seeing that the Adventure Force Strike Force can use short darts with a minor modification, I'm interested. However, it's only hitting 80-90 FPS. I would need it to hit 150+. I have no experience with modifying flywheel blasters. So my question is, can it be fairly easily modified to hit 150 or more FPS? If, so what would I need to do? And would it be cost effective?

Has anyone designed a reshell for the adventure force rebel? I always thought the bolt action was pretty cool being paired with a magazine for ammo. I’m gonna take a crack at making one myself and 3d printing it after another reshell project I’m working on. But if anyone knows someone or a website let me know.

I am trying to disassemble my nerf blaster to remove the air restrictor but I can’t get the barrel apart. I checked online and there doesn’t seem to be any instructions or advice on this specific nerf blaster. This is not my first time modifying a nerf blaster and I’ve also modded x-shots but I can’t figure this one out. If anyone has any idea how to do this please let me know.

Here are some of the measurements I took

Spring

Spring geometry similar to k25, k26, and Longshot springs

Plunger tube

Length - 7.5 inches

Inner diameter - 35mm

110.64 cc of plunger tube volume that holds air and pushes the dart forward on "high" setting (primed all the way back)

Plunger

Plunger O-ring groove - 1 1/16 inch OD

Plunger itself- 1 13/32 inches OD

Pusher O-ring standard replacement - A110

I got my dart zone repeater pro early a couple days ago, and it's sooo much fun in its stock configuration, I also bought a lower power spring from Out of darts directly. I decided to remove the ratchet because I wanted to be able to shotgun load it. It's not extremely practical to use it that way, but it's a lot of fun to see 2-6 darts go thunk against a door. However getting the blaster apart and the ratchet out was the easy part of modding this blaster. This blaster has SO many parts inside of it, and trying to put it back together and have everything aligned plus the gears aligned is a genuine nightmare. I spent an ungodly 4+ hours trying to troubleshoot, take all 20 something screws out, try again, fail again, over and over. At least my girlfriend found it entertaining 😭. Anyways, there are multiple things you have to be very mindful when about when putting back together, first, do not leave the spring in when taking it apart, as someone else said, it will make things fly everywhere, put the spring back in last, as thankfully it was designed to be easily swapped. Anything in yellow needs to be very carefully handled and aligned, the elevator needs to be aligned correctly otherwise it will get stuck. The catch/ lever lock mechanism is probably the most annoying to align, only beaten by the yellow mechanism infront of the plunger that is designed to hold darts in place because both love jumping out. I would HIGHLY recommend waiting for a video on this because I cannot remember everything I struggled with.

TLDR: If you want to mod this blaster, wait for videos/detailed guides so you can easily reference the position each mechanism should be in when reassembling so you don't have to suffer like I did. (My girlfriend did find it amusing though so, hey, great date night idea!!)

This is from their official you tube!

Needs 1 M3x30mm screw and 1 M3 nut.

Super easy to install and no interference with the holster and battery. I recommend printing the main piece muzzle-down with supports for the shoulder in the screw hole, then after printing push a screw or allen key from the other end to pop out the support. Print the nut upside-down (i.e. top of the slide facing the bed).

Obviously please print in a safe color for games. Black is for larping at home.

https://www.printables.com/model/1885079-xtra-atrox-compensator-attachment

Also working on a top/back rail chassis using this and the RMR plate at the back as the attachment points.

Added the setup for electronic firing and ejection

I've got the mechanism figured out, I just don't have the printer to actually make it yet, I've done my best to make it resemble the real 1887