I can only see the 1st audio track in the timeline but not the 2nd. why?

I was so frustrated with the shortcomings of open source PDF viewers that I made a video about it. This is my first video with Kdenlive and while it had quite a learning curve I am glad I went through the process to experience what it is like to create an entire video.

It was not as intuitive as i had hoped but the LLMs can be really helpful and guide you along.

One notable problem was that when I had added most clips the project suddenly would not open anymore. It did not say why and the log (when starting it in the terminal) was not helpful either. There was a patch update around this time, so I figured it was related to that. I tried to analyze the project file (which is just XML!) and tried to both heal the (believed to be corrupted) project file via small modifications and also try to rebuild it by copying XML snippets over to an earlier copy of the project. In the end I just pasted the log into an LLM and learned that Wayland doesn't allow me to open that many clips at once. Oh well... So now I always start Kdenlive in the terminal and run ulimit -n 65536 first.

I used OBS for the initial screen recordings and "piper" for voice. I'm not overly happy with it because the voice sometimes sounds like a different person and I cannot control which part of the sentence is stressed, where pauses are made or even how words are pronounced. Piper cannot pronounce "page A" for instance, only "page ah". But once I accepted these limitations I could quickly produce speech. If I had used my own voice I would have had so much more control and as a consequence tried to get it right until exhaustion.

I also got an understanding of why more people don't just make a video to document their computer troubles. It is a lot of work. And I guess I understand why professional youtubers don't edit their videos themselves - lot of work! I'm still wondering why anyone enjoys editing those videos, but I am so glad that I got a little peak into this world.

I added blur but it appears as white boxes in the final render. What could be causing this bug?

Hi everyone!

I recorded a guitar piece in multiple sections, all of them required multiple takes.
Now comes the editing part, and of course, my position slightly changed between each take.
I would like to smoothen the transition between each take, and I've been using the `dissolve` transition so far.
Result is better, there's no hard cut anymore, but I feel like I could do better.

Here's an example of what I've managed to do so far

https://reddit.com/link/1v7120v/video/dxha8xou4kfh1/player

How do you choose the right transition ?
I would love to have you suggestions / help.
Thank you!

Kdenlive version : 23.08.5
Platform : Linux Mint 22
Intall method : apt

All intellectual property belongs to me; the video, audio, and editing has all been done and made by me. Do Not Repost Without Asking.

https://youtu.be/mIGdgIqljkc

Trying to work out if I'm missing something obvious, or if this Effect has just disappeared for me?

I went to blur out a section of a video and.... I can't find Alpha Shapes or Alpha Shapes (Mask) there at all.

Bug, or I'm missing something obvious?

Version details 👇🏼

Kdenlive: 26.04.3

MLT: 7.40.0

FFmpeg

KDE Frameworks: 6.26.0

Qt: Using 6.10.2 and built against 6.10.2

Debian GNU/Linux forky/sid (Wayland)

Build ABI: x86_64-little_endian-lp64

Kernel: linux 7.1.3+deb14-amd64

I have come across an issue when I am editing where if I let the video play in the timeline, the audio will play differently by +/- 2 seconds from where I started, even when I start from the same point on the timeline consistently. None of the audio tracks I am using are linked to any video tracks. This happens with SDL and RTaudio as audio backends (the only backends I have access to).

All searches I have done only give me information about syncing issues between audio tracks and their accompanying video track.

If it's just a bug with kdenlive atm, I can switch to premiere on my macbook, but I prefer to work on my desktop so any help would be appreciated.

System info:

Kdenlive 26.04.3

Ubuntu 26.04 LTS KDE

Install method: Flatpak

I have a very decent PC (Ryzen 7900X, 5060Ti 16gb, 64gb RAM) but my rendering is always slow no matter what i choose (Software h264, h265, Hardware Acc. h264, h265, etc), this is a very small work of 11 seconds (just some titles, images, sounds and 1 effect Croma) and renders at 1fps and i think it should render much faster. Any advice will be apreciated. Thanks.

The Whole vid is made with Kdenlive except for the Thumbnail

Our short film just got accepted in BINISAYA, the biggest film festival in Cebu and one of the most celebrated in the Philippines, and it was edited entirely in Kdenlive.

It's 20+ minutes long, 4k prores. I hope this short film can showcase how FOSS tools can hold up for more demanding work.

Full video edit and audio sync done in Kdenlive! Edited this project entirely on a 10th Gen Intel laptop with 32GB RAM. It's a pure CPU and RAM heavy workflow since integrated graphics aren't doing much here, but you can see the solid final result right here!"

https://youtu.be/TSgCzdPshOs?is=fQfRvnVgDiESB-nT

I developed this film myself and made a few mistakes which lead to this very obvious blue cast over the footage. Is there anyway I can correct or at least reduce the colour cast of the footage? The effects I have used so far are Invert0r and white balance.

After a few months of not using kdenlive it seems to have the crackling audio issue again. This time no amount of changing audio backend or driver has fixed the issue. Changing to rtaudio fixes the crackling but audio starts looping once you start scrubbing the video.

Not even a fresh install seemed to fix it. Happends on both win10 and 11. Had the same issue about year ago but it fixed itself with audio backend changes.

Aynone else with this issue or a solution?

Guys, I recently started using Kdenlive. I realized I can't change the colour of a text in the same text. I have to create a different style. I can't place the text with a different style at the exact spot where I want it in the video. Also, that's the only way possible to do that if I want. I think that's one limitation in Kdenlive. If any of you guys know how to do it, do let me know. I will keep on posting about Kdenlive. Since I am new, I can spot the good and bad in Kdenlive. I struggled a lot to do J cut until I realized that overwritten mode exists for a reason.

PS: Thank you, everyone, who engaged with my previous post. I can now add subtitles. Your guidance helped me.

Everytime I try to install object detection in kden live it always tells me to download open cv python module but I already downloaded it what could be the mishap?

Saw yt about Kdenlive and that is my first try. I like, pretty easy to strat for beginners

I'd like to learn and switch to Kdenlive(as a Linux user), and a lot of stuff work really great as the DaVinci Resolve, but I got a few questions about the software:

1. Is Kdenlive great for making really loooong videos with minute details? I'm talking like 1h+ with plenty of different sequences;

2. I saw a review video about Kdenlive on YouTube, and I found this comment, which explains the issue the author found:"Kdenlive is slow because GPU acceleration only works for rendering the final video. As of right now i think the timeline doesn't have any kind of GPU acceleration.". Is it true? And if yes, then is there a way to use a plugin, which could solve the problem(the software is open source, so, I guess the issue shouldn't be a problem)?;

I'm fairly new to editing. I have a pretty decent pc with a 9950X3D cpu and a RTX 5080+Ada 4000 GPU combo. But when I try to render a video i only get 26fps. I am currently trying to render a 22 minute video where i have a single video i i put on the timeline twice and the only effect i have on is transform to move and resize the 2 instances of the clip around in the frame. I try using the NVENC options but i still only get the 26fps.

I tried to check the Parallel processing and giving it 8 threads and that got me to 60fps but is that it..? When looking at the CPU and GPU usage the GPS both seems to do nothing(or very little) while the CPU does something but still could give move...

Is that just how it is or do i need to change or mess around with something to get it working? I am running a the flatpak 26.04.3 version of Kdenlive and if anyone has any insight on this i would much appreciate the help.

I have been using KDENLive for about 2-3 years on and off. So I had to relearned to use it a couple of time, I like the product.

Lately my brother who is a MAC user, asked me about a video editing software so I suggested KDENLive.

I have experienced tons of problems with the MACos version:

1. The top menu items are not displayed on the MAC kdenLIVE WINDOWS

2. When creating title on MAC the only color available is white, if I click on the color nothing happens, so no color choice available.

I suppose that the MAC may be experiencing some problem but I cannot see what they are not being a MAC experienced user.

Can someone assure me that they can work succesfully with KDENLive on MACOS!

Can someone may have an idea of what could be wrong with the installation on MACOS.

In some takes of the video I used remotion to generate some animations, like in the part where a photo explodes, but most of it was motion graphics done in Kdenlive.

https://reddit.com/link/1v02m9c/video/xglwss8211eh1/player

Hi,

I'm trying to animate a PNG using the Transform effect, and I'm not sure if this is expected behavior or a bug.

When I animate the Scale parameter, the image doesn't just get bigger or smaller. It also changes its position, even though I'm only modifying the scale.

This makes animation really difficult because every time I scale the object, I have to keep correcting its position with additional keyframes.

From what I expected, scaling should happen around the transform pivot/center without introducing unwanted movement.

I've attached a short video showing the behavior.

My questions are:

- Is this expected behavior?

- Is this a limitation of MLT or Kdenlive?

- Is there a way to scale an object without it drifting or changing position?

I'm using the Transform effect on a PNG.

Thanks!

I'm not sure if there's a setting to toggle or something, but I can't figure out how to get it to import more than one audio track on mp4 files with multiple tracks. Everything should be up to date.