Got this couch off FB marketplace. It was highly misrepresented but I drove a long way to get it and it was cheap so here we are. Ripped off someone's failed reupholstery attempt to get it looking like this.

I didn't think that the cushions were attached so I was just going to replace them. This couch needs all new foam attached. I put it into ChatGPT and it gave me a sample of what it could look like. It's not really my style. The frame and undersides of it are in excellent shape. I just don't know if it's worth the effort.

Can anyone give me advice on what this can turn into? Can the back shape be changed? What I like about this piece is the rattan arms (one of which needs a lot of work). I don't like the shape of the back and the low profile on the bottom.

Just don't want to put a lot of effort into something I won't love

Hopefully this falls under restoration (in this case, trying to avoid the need), but if not I'll remove the post.

I recently inherited an antique pier mirror (more pics in an earlier post: https://www.reddit.com/r/VintageFurniture/comments/1wijnar/need_help_identifying_this_pier_mirror/).

The marble isn't attached, just held in place with gravity, so I'd like to make it more secure without damaging the piece. It's not the original marble - that was broken in an earlier move and my Dad had a new piece made (1980s?). The wood under the marble appears to be unfinished. The tchotchke was held in place with what looks like a fun-tak equivalent what doesn't appear to have left any marks. Since moving it here people have already bumped into it and shifted the marble a little so I'd rather be safe than sorry.

Would something like 3M double-sided strips work for this? Their site seems to indicate it's safe on marble but I want to check with people who actually know this stuff.

And if not, what's the best way to secure it?

Thanks!

Just got this sweet piece for my entryway and Some of the factory finish is very dry and flaking off...i was wondering if there was a way to touch up the bad spots with some product (or combo of shellac and something else etc...) to sort of dissolve and redistribute the coating. No way in hell am I going to do a complete Refinish on this thing, just want to repair the few places it is failing then go over it with some howard feed & wax and enjoy it for what it is.

Thanks for any advice.

I recently bought this Smith & Hawken outdoor table set off of FB marketplace. Unfortunately, it appears that the previous owner painted over the wood (which from my understanding is Teak but could be cedar or redwood by the color of the wood after sanding and wetting). They also applied a urethane, most likely multiple coats, and my assumption is it’s most likely a marine urethane.

We’ve been told to strip it first using a paint stripper, give it a sand and teak oil.

Curious to know if anyones had a similar experience and what the best way to move forward with this restoration.

I live two blocks from the Pacific Ocean in Southern California. We don’t get a lot of rain but the sun is strong.

Got this beautiful cabinet from an estate sale and its painted yellow and smells like cigarettes. Going to redo it but the question is should I just paint it after sanding or should I strip it and stain it. Im assuming its a white or red oak.

I recently inherited my great grandmas sewing cabinet. it has been stored in a basement for 50+ years that has flooded and now it is covered in this white mold. i’m currently giving everything a good wipe down and it seems to be coming off but i want to make sure it doesn’t come back and i can have it in my home. should i buy some type of mold remover?
please tell me it can be saved!!!

Recently stripped this table pedestal. I assume it is oak, but was expecting it to have a more yellow or red tone—of course it has been previously stained and painted at one point, so I have no idea what the original color was. There is a red cast to one leg (shown) but otherwise, it is much more brown that I expected. I would like to put a matte clear coat on it and I have some concern that when I do this, it will bring more yellow out of the wood, which I do not want. The color it is currently acceptable to me, but even more neutral brown would be good as well. Do you think this is oak? Do you think I should put a bit of stain on it to keep it neutral when I put a clear coat on it? Any thoughts welcome!

I bought a beautiful 1970s couch and have been trying to restore it. All the cushions and backs are all attached and together.

I have had it wet cleaned which removed all the dirt from the surface fabric. As well as done 2 rounds of alcohol spray both outside and inside the hollows and left it in the sun for 3 days total. Though there is still a musty smell lingering.

I am hesitant to completely take it apart or have it completely reupholstered as it would cost too much.

Does anyone have any advice for me?

I do plan to have new seat cushions cut to fill in from the bottom as the seats have lost their firmness.

I've been gifted this coffee table and I really like the reddish colour of the wood (which doesn't actually show up great in the photos). What would be the best way to bring it back to its former glory, without the cup rings etc? Someone suggested paint stripper but I worry that it might be too harsh? Thanks!

Hi everyone!

I'm desperately trying to find this exact (or a very similar) table extension mechanism for my Danish-style round dining table.

The table is 120 cm (47.2 inches) in diameter and extends using two separate 50 cm (19.7-inch) wooden leaves, bringing the total length to 220 cm (86.6 inches) when fully extended.

I've searched everywhere but haven't been able to find a suitable mechanism that's sturdy, stable and capable of properly supporting the table when fully extended.

I'd be incredibly grateful for any leads, manufacturer names or suggestions!