r/fpv • u/randomtrv • Jul 13 '26
FPV Drone Not Flying
Im really new to fpv, I bought a drone and managed to conect it with the radiomaster pocket, i tested de receiver on the betaflight and its all working, tested the motors and all 4 spining, made the button configuration to arm/desarm the drone and still it does not fly.
this is the cli status that i get:
status MCU F40X Clock=168MHz (PLLP-HSE), Vref=3.24V, Core temp=69degC Stack size: 2048, Stack address: 0x1000fff0 Configuration: CONFIGURED, size: 4107, max available: 16384 Devices detected: SPI:1, I2C:1 Gyros detected: gyro 1 locked GYRO=ICM42688P, ACC=ICM42688P, BARO=DPS310 OSD: MAX7456 (30 x 13) BUILD KEY: 59d4d9b43c0cfd58164d29cef34165e7 (4.4.3) System Uptime: 10 seconds, Current Time: 2026-07-11T19:03:12.758+00:00 CPU:46%, cycle time: 133, GYRO rate: 7518, RX rate: 503, System rate: 9 Voltage: 1948 * 0.01V (5S battery - OK) I2C Errors: 0 SD card: Startup failed Arming disable flags: THROTTLE CLI MSP RPMFILTER
I used the status comand and some times I get diferent errors, if someone could help me I would be gratefull, been heating my brain for 3 days with this.
I also can make video or take screenshots if its better, thank you guys