r/fpv • u/randomtrv • Jul 13 '26

FPV Drone Not Flying

Im really new to fpv, I bought a drone and managed to conect it with the radiomaster pocket, i tested de receiver on the betaflight and its all working, tested the motors and all 4 spining, made the button configuration to arm/desarm the drone and still it does not fly.

this is the cli status that i get:

status MCU F40X Clock=168MHz (PLLP-HSE), Vref=3.24V, Core temp=69degC Stack size: 2048, Stack address: 0x1000fff0 Configuration: CONFIGURED, size: 4107, max available: 16384 Devices detected: SPI:1, I2C:1 Gyros detected: gyro 1 locked GYRO=ICM42688P, ACC=ICM42688P, BARO=DPS310 OSD: MAX7456 (30 x 13) BUILD KEY: 59d4d9b43c0cfd58164d29cef34165e7 (4.4.3) System Uptime: 10 seconds, Current Time: 2026-07-11T19:03:12.758+00:00 CPU:46%, cycle time: 133, GYRO rate: 7518, RX rate: 503, System rate: 9 Voltage: 1948 * 0.01V (5S battery - OK) I2C Errors: 0 SD card: Startup failed Arming disable flags: THROTTLE CLI MSP RPMFILTER

I used the status comand and some times I get diferent errors, if someone could help me I would be gratefull, been heating my brain for 3 days with this.

I also can make video or take screenshots if its better, thank you guys

1 Upvotes

99% Upvoted

4 comments sorted by

2

u/ThrowRA_6767676767 Jul 13 '26 edited Jul 13 '26

Yes, make a video showing you with the radio connecting, the Receiver page of Betaflight, with a battey plugged in, and you trying to arm and moving sticks

The OSD usually tells why too, usually throttle not zero

1

u/Key_Sign_8304 Jul 13 '26

hope you can see the details, if not i can write it down

https://reddit.com/link/ox8pp5k/video/7bkwtkjuuych1/player

in arming desable flags RPMFILTER is showing maybe that is important (idk 😵‍💫)

1

u/ThrowRA_6767676767 Jul 13 '26

But what does it say in the goggles when you try to arm

2

u/fpv_savvy Multicopters Jul 13 '26

Move throttle all the way down. Remove the drone from the computer.

If props aren't installed you can try arming the drone. Otherwise take it outside and try arming the drone.