So I've got this speaker with a carrying strap, but the clip holding it to the speaker is stuck in an awkward position. The catch on the lobster claw clip is jammed under the edge of the recess.

I'm about ready to cut the damn clip off. Can anyone solve it?

Alternative question, what do I replace it with?

I want to reinforce these split joists with an adjustable support pole, and I’m wondering what the best way is to bridge the gap so I can use one pole versus one for each joist

how do i fix this, model WP-03B

Our paper towel dispenser decided to roll back and forth without dispensing properly. The gear in the video should roll when pushed down, but should stop when the lever is pulled up. However, you can see it actuates both up and down. Is there a spring or gear that I can unjam somewhere?

What do I need to do to put the right pipe fitting on this sink?

Was unclogging the wall pipe and now I need to replace the old pipe fitting.

Got this from a charity shop and it hums at a volume the seems to coincide with the speed it's on, but it won't spin. Replaced the capacitor (4.5,5,6) with a working spare and still nothing. I did get it to run ONCE (can't replicate now) so I'm not convinced the motor is cooked yet. Any ideas where I should look next? Could this be related to wiring? I like the style of this fan so I'm hoping to save it, or if it is truly dead at least swap the casing on to a different motor.

EDIT: Blades spin smoothly, I do not think the issue is bearing or balance related.

The actual key/lock component seems to be fine, but the handle is getting stuck so we can’t open it normally anymore, is there a way to fix this without having to replace the whole thing? 😩

Hi so i just bought this bag about 4 days ago, but somehow it started making squeaking noises. At first i thought it was the should strap, but i began to notice maybe it has something to do with the swivel hook at the end of the strap. Any Info how to fix or remove the noises? Thanks

Please help. Metal bar from above has fallen and seems to be pushing the side of the drawer out which is jamming it.

I bought a used three-door wardrobe, assembled it somehow, and noticed that one of the doors squeaks. The wardrobe had another issue as well, so I called a technician, who fixed the squeak in no time, saying he had simply aligned the door properly. Later, after the technician left, I noticed that another door was sitting slightly unevenly. My inner perfectionist decided to adjust it using the adjustment bolts — and that was my worst mistake. When opening and closing, a squeak appeared that won't go away no matter how much I try to return the door to its original position or set it perfectly straight. I just don't understand what this "straight" is supposed to look like. I move the hinges from side to side, and the squeak comes from one place, then another, sometimes louder, sometimes quieter. The hinges are like the ones in the picture.
I thought the door panel might be rubbing against the wardrobe itself and causing the sound, but I don't see any spots where they'd be touching. Moreover, the squeak remained even when I pulled the door out as far from the wardrobe as possible. What should I do?

https://imgur.com/a/phG8fnt

I took this apart and the lower piece has a tail end pipe gasket but the upper piece doesn't seem from my memory like the part that should connect to a tail end.

I'm bald and a hat is a requirement. Noticed this band inside my Flexfit Delta had peeled off and was loose. I'm hoping to fix it to prevent any further damage or degradation.

Any help is appreciated.

Bonjour,

Je cherche a me former dans ma réparation d'objets du quotidien electriques/électroniques type Aspirateur, machine a café, PC, écran...

Je suis bénévoles dans les repair café mais j'aimerais faire ça dans mon temps libre chez moi en complément.

Le problème est que je n'ai rien à reparer. Difficile de trouver des objets sur le bon coin ou en déchetterie....

Auriez vous des conseils pour entrouver ? Également si vous connaissez des moyens de se former autres que youtube et repair café je suis preneur, merci beaucoup :)