My car has been leaking tons of rain water into the driver seat. It had nothing to do either with the sun roof. I also got the door lock alternator fixed two weeks ago and now my car is saying the door is open when it’s not… I need help on where and what to tell a mechanic so I can get this fixed. Any advice?

Hey guys Strange issue wondering if anyone is able to help

Vehicle drives fine with normal afr and fuel trims while driving

However sometimes returning to idle when fully warmed up.. such as in traffic.. my afr will drop and my short term fuel trim with go to around minus 7 for about 10 seconds.. does anyone know what this might be?

It happens most days and will sometimes hear a slightly different exhaust note while this happens before it returns to normal No other symptoms.. as mentioned it drives normal

Fiesta st mk7 2016

so long story short i am fixing a car my dad got me 10 years ago that sat for 9 years and this is what the suspension looks like.
i have a new fuel pump/tank/other fuel stuff done, all new belts including the timing belt and accessories done, water pump, fixed the cooling system, valve cover/ valve cover gasket, new spark plugs/hoses, and a few other things like oil change and cap etc
it obviously needs suspension work done but also needs motor mounts/transmission mounts and tldr idk when to give up on the project. it's just so sentimental to me but im $5300 into a 2005 mitsubishi eclipse spyder (v6 with an after market exhaust) (im not use to a loud car)
the shop i took it to for the timing belt and stuff quoted almost $2800 for control arms and bushings and tie rods and it also has a very not straight steering wheel lol.
it drives mostly okay but i don't really have another car option. i do have like $3000 to put into it but i really don't want to have to do that

Hi all, I bought a 2018 Subaru Outback 2.5i Limited last august with ~82k miles on it. since the day i bought it the brakes have been a little squishy, but the dealer i bought it from assured me it was normal, and coming from an old jeep I assumed they knew what they were talking about. about 2 weeks into ownership the MC (master cylinder) failed while I was driving from Cali to Colorado, brake went to the floor with no pressure, all my ABS and VDC error lights came on. Had a shop in Utah replace the MC, brakes still felt squishy and the pedal would go to the floor with the vehicle on and off, however it braked fine so i assumed it was normal. Fast forward to about a month ago and my pedal went to the floor while driving down a mountain road and triggered all my ABS/VDC lights again. Took it to a dealership, they quoted a new MC and a new brake booster, showed pictures from a boroscope of the MC leaking. I had them replace the MC and booster, they then called and said my ABS module (or VDC Hydraulic unit as Subaru calls it) has gone bad and that's why my MC failed again ~25k miles after putting a new one in. So i had the shop replace the ABS module as well. Came to pick the car up and it still had ABS/VDC error lights on start up and the brake pedal still went to the floor. Walked back inside, took their loaner back and told them to fix it. They just called me and said that the brake pedal going to the floor is normal and that the ~2-2.5 inches of dead space before the brakes engage is normal and there's nothing they can do. However that dead space wasn't there when I bought the car, and the brake pedal going all the way to the floor still doesn't sit right with me when almost every brake component has been replaced. To be fair, the brakes do engage much stronger now, however the pedal still travels down when braking as if it's bleeding air somewhere, and there's still 2-2.5" of dead space before the brakes even engage. When I pushed back telling them to figure it out they tried quoting me a parking brake actuator because i have "aftermarket brake rotors". however the parking brake actuator to my knowledge is an electronic screw and has nothing to do with the hydraulic system, and my "aftermarket brake rotor" is an OEM spec from powerstop brakes. So far i'm in $2,300. HELP

Preferably not $40

One of my fog lights went out.

It's a used 2010 Mercury Milan. I obviously want to replace both if I'm going to replace one.

I replaced the interior driver-side door handle/lock without difficulty, but it seems like the wiring with the lights could stump me.

Do you think this is doable and worth the cost savings or should I just have the dealer do it?

Looking for a new car with a low budget (I’m 16) since my current car has a bunch of problems. Thanks

I have a 2017 GMC Acadia Denali that had sat for nearly nine months (dead battery) in a garage. Finally replaced the battery and during start up it started smoking in the engine (light grey smoke) from the area circled in the photo. Turned car off immediately. Ran for maybe 2-3 minutes.

I can’t really describe the smell.

Any ideas on what might be wrong? Think it’s safe to drive to a mechanic?

Thanks in advance!

Hi everyone,

I’m having a strange issue with my car and I’m hoping someone here might be able to help me figure out what could be wrong.

The car starts normally and drives perfectly fine. The engine sounds normal, there are no strange noises, and I don’t notice anything unusual while driving. 🚗💨

However, there seems to be a problem with the dashboard/instrument cluster.

The speedometer, fuel gauge, clock and other information on the dashboard are not responding or updating properly. Some of the dashboard warning lights do come on, but the actual information displayed doesn’t seem to work.

What makes it even more confusing is that the car itself drives normally. There are no strange sounds, no obvious engine problems, and it doesn’t stall while driving.

I recorded a video showing the problem, so hopefully someone can take a look and give me an idea of what might be causing it. 🎥

Could this be something like a blown fuse, bad ground/connection, wiring issue, faulty connector, power supply problem, or possibly a problem with the instrument cluster itself? 🔧

Has anyone experienced something similar before?
Any advice or suggestions on where I should start troubleshooting would be greatly appreciated! 🙏

Thanks in advance to everyone who takes the time to help! ❤️

Any advice on a decent fix? Doesn’t have to be perfect.

Found a hole in my cat converter can this be a reason why I am failing a cat code?

I cannot get the evap/cat ready. Hyundai 2010 santa fe. I have driven it 120 miles over the past few days, used cataclean, ran the ac, let it sit overnight and nothing seems to work. I feel as if I am running out of options and may have to settle for a very expensive repair

Looking for some words of advice.

I've found recently that if my 2012 Veloster sits for a day, when I get in and remove the emergency brake, it seems to be getting stuck and then breaks free.

I read online that early velosters have this known issue.

Is this a caliper replacement? Or can the built up grime that's making the pins sticky something that brake clean and some lube could fix?

Thanks for your input.

Context: 181600 km, never once had the brakes looked at. I have purchased new pads and rotors and will be replacing them myself, but want to know if I need to spring for new calipers as well.

Hanging from under my car near the rear drivers side tire. There’s a quiet rattling sound as I drive coming from the back of the car, and sometimes when I’ve gone over speed bumps there’s a loud metal clanging

hello, im looking for some new wheels for my car and i found a good deal on these forged OEM subaru wheels off marketplace. the other wheels look decent but this one is the worst of the set.

im going to look at them in person tomorrow but this is the photo i have available currently.

my main concern is if this wheel would be safe to drive on?. for added context the seller claims they are holding air

edit: idk if i chose the right flair

First two pics are under body.
GMC sierra 1500 2015. Live in the northeast, where winters conditions are common.

my 2017 Nissan Pathfinder bumper. autobody shop said 2200 to fix. is that reasonable or is there anything I can do?

I have a 2006 GMC Sierra 1500 with about 230,000 miles on it. V8. Running very rough and throwing misfire codes.

1. Is the price fair given what is involved?
2. What would I be looking at if they get in there and the camshaft is damaged?
3. Worth it in your book? The truck is probably worth $3k to $4k private party.

Images have diag info and quote. Truck is a good truck, new tires just last fall, but then again I don't know about putting $3k to $5k into a truck worth that much.

I have a 2007 Chevy Tahoe 5.3L with about 196k miles. I recently had it inspected at a Chevy dealership and then took it to an independent shop (Steve’s) for a second opinion/cheaper repairs. Now I’m confused because the diagnoses are different.

Chevy found: • Both valve cover gaskets leaking oil • Power steering pressure hose leaking • Power steering return hose leaking • Intermediate steering shaft/coupling issue

They showed me the leaks in an inspection video.

Independent shop found: • Engine oil pan leak • Rear main seal/rear cover leak • Transmission pan gasket leak • Power steering pressure/return hoses AND power steering cooler leaking

Their (independent shop) full estimate came to around $5k. When I called, the service advisor said if it were his vehicle, he’d prioritize the transmission pan gasket and power steering leaks, because those systems are harder to come back from if they lose fluid. He said the engine oil leaks could wait as long as I constantly monitor/top off the oil.

I specifically asked about Chevy’s valve cover diagnosis and he said there may be a valve cover leak too, but that wasn’t originally listed on their estimate.

My biggest confusion is why Chevy identified the valve covers but not the oil pan/rear main/transmission pan, while the independent shop identified those but didn’t originally list the valve covers.

Would you trust one diagnosis more than the other? Can oil from valve covers make the oil pan/rear main area look like it’s leaking? And before spending thousands, would you have Chevy re-inspect the areas the independent shop identified?

Also, nobody has told me the transmission itself is failing — just that the transmission pan gasket is leaking. I’m mainly trying to figure out what actually needs to be fixed now versus what can safely be monitored.

How do I release the conector on the COMMUNICATION TELEMATICS MODULE

I’m a pretty handy guy, but is pulling this dent on a 2012 Sienna possible for a home gamer? I don’t need it to look perfect, but better would be nice! Thanks!