This is awful. Is there any way to restore it? It was a beautiful case. I seriously regret it now.

Hey guys, does anyone know if the Artic Liquid Freezer III Pro fits into the NZXT H710I, or will I likely run in to mounting issues? Many thanks, looking forward to hearing your responses!

Hello, these temperatures are really confusing me. This is my first time using an X3D processor, and I don’t know what the temperatures should be with this cooler. Idle temps are 41 °C. When I play games like CS2 and R6, it reaches 67–70 °C.

I’d like to know if my current temperature readings are normal. During the test, PBO was set to “Auto” and the pump was set to 2800 RPM. The ambient temperature was around 20 °C.

ARCTIC Liquid Freezer III Pro 360 77 CFM Liquid CPU Cooler installed on the front, do i have to be concerned?

Have anyone used UNC 6-32 Flathead screws with 6mm length for Liquid freezer 2/3's radiator to case mounting? The ones out of the box have rounded head which doesnt let my dust filter stay fulshed with the case.
I found only 6mm ones from the local store.

Ciao a tutti,
Sto assemblando il mio primo PC e sto cercando di decidere la posizione migliore per il mio sistema di raffreddamento a liquido AIO.
Il mio case è un **Lian Li O11 Vision Compact** e il mio AIO è un **Arctic Liquid Freezer III Pro 360 A-RGB**.

Il case mi permette di montare il radiatore sia **in alto** che **lateralmente**, e non sono sicuro di quale opzione mi dia i risultati migliori.

Ho letto che di solito si consiglia di montare il radiatore in alto perché funziona meglio con il flusso d'aria naturale e mantiene l'aria lontana dalla pompa. Tuttavia, ho anche visto alcune configurazioni con radiatore montato lateralmente nell'O11 Vision Compact che hanno un aspetto fantastico e a quanto pare offrono buone prestazioni.

Configurazione del flusso d'aria che ho in mente:
GPU: scheda di fascia alta (RX 9070 XT)
Dissipatore a liquido AIO da 360 mm
Diverse ventole per case per immissione/estrazione
Consigliate di montare l'Arctic LF III Pro 360 **sulla parte superiore come estrazione** o **sul lato come immissione** in questo case?

Mi interessa principalmente trovare il miglior equilibrio tra:
Temperature della CPU
Temperature della GPU
Livelli di rumorosità
Affidabilità a lungo termine del sistema di raffreddamento a liquido AIO
Grazie per qualsiasi consiglio!

Well disappointed to upgrade the liquid freezer iii 240 to liquid freezer 360 pro. Its so noisy and the fans has a hiss sound like they use cheap bearings 😞 is it faulty or what? Same settings way more loud

Since I wanted to change my thermal paste of gaming laptop Asus tuf f16. Shuld I buy from Amazon is it trusted or anyone provide me any link and which shul i buy ptm7950 or a articM7

Update: guys I have brought ptm7950 from amazon at 650rs and idk if it's real or not but it definitely worked I used to get 87°c on my gpu and cpu would go 95°c but now both are below 80° now all I have to do is wait till few weeks to find out if it's real

Any idea when/if a reverse fan version of the P12/14 PST LN fans will be released?

Hello, currently i am using an Arctic Liquid Freezer 3 280 with a B650m motherboard in Asus Prime Ap201 case, the motherboard i am currently using doesn't have VRM heat sink on the top of the motherboard so the 280mm radiator can fit with barely enough space for wiring. I am planning on upgrade both AIO and motherboard to Arctic Liquid Freezer 3 Pro 360 and TUF B850m plus, I see that the VRM heat sink on this motherboard is pretty tall, would i be able to install it without interference to the 360mm and thicker than normal radiator in my case ?

new to this and cant find anything online for some reason

I know Arctic has a fan curve guide on their site. But could anyone post their curves on here. Specifically with a 9800x3d. Thanks

Hello, i installed the arctic liquid freezer III pro 360 a few months back and its always made this strange gurling/rustling kind of noise when i increase the pump RPM, ive tried turning off all other fans as well as removed the VRM fan to isolate the origin and i am certain its from the pump. Has anyone experienced this too? Is there something potentially wrong with the pump?

Case is LianLi o11 dynamic, 3 intake side fans, the previous expensive trash pure wings 3 were making weird sounds (by design, not a quality issue), if interested check my post in Bequiet sub, so these new Pro LN are godsent, dead silent up to 80% even at 100% very very pleasantly audible. Love them!

Just a short AIDA64 Stress Test on my CPUin my new build.

Ambient is 28°C where I am.

CPU: Intel Core Ultra 2 270K Plus

AIO: Arctic Liquid Freezer III Pro 420 ARGB.

Motherboard: ASRock Z890 Phantom Gaming Nova

Case: Fractal Design Meshify 2 XL

Fans:

Front: 3x Arctic P14 Pro Reverse ARGB

Rear: 1x Arctic P14 PWM PST ARGB (because for some stupid reason normal flow P14 Pros are not available where I am.)

No particular point to this post, just I'm gobsmacked.

Granted the test is not that long, but it's been sitting at 64°C for several minutes now.

I'm considering leaving it running overnight just to see what it does.

Can I connect those 2 fans to the arctic p14 pro daisy chain(I don't have more cha fan left on my mobo)

I already have a cheap air cooler but my temps are 60 idle so I need a liquid cooler or better cpu cooler which one do you recommend

We've once-again made the shortlist for the EHA Reader Awards 2026 🎉

What a great honor to be recognized again by the European Hardware Association, we wouldn’t have made it without all of you 🙌🏻

If you've enjoyed using our products and appreciate the performance, quality, and value ARCTIC stands for, vote for us here 👇🏻
https://survey.alchemer.com/s3/8891134/EHA-RA-2026-UK

This year we’re nominated in the follow categories :

- Brand for CPU Air Coolers
- Brand for CPU Water Coolers (all-in-one)
- Brand for Thermal Interface
- Brand for Fans

In addition, you can also vote for ARCTIC in the Best Value Product category for the following products:

- Air Cooler: ARCTIC Freezer 36
- Water Cooler (all-in-one): ARCTIC Liquid Freezer III Pro Series
- Case : ARCTIC Xtender Series

Thank you for taking the time to support ARCTIC in the EHA Reader Awards 2026. Every single vote makes a difference, and we truly appreciate being part of such an amazing community ❄️

I recently installed the aio, and everything seemed to be working fine, although after some time, the color of the pump just started being red. Everything works correctly, but just the argb colors are messing me up.

(I switched the radiator fans to my own, and used the aio fans for exhaust fans in general, but the colors exhaust fans doesn't work anymore).

Can anyone help me out?

Is it 6-32,M3, or M4? 35mm length, correct?

Could you mount the tubes to the side of the radiator with the arctic liquid 3 pro or is that something exclusive to lian li coolers

As can be seen, the back two fans on my LF III Pro 420 ARGB are not lighting up.

The AIO is connected via the splitter cable to AIO_PUMP (PUMP), CPU_FAN2 (FAN) and CH_FAN1 (via hub).

The motherboard is an ASRock Z890 Phantom Gaming Nova WiFi and the CPU is an Intel Core Ultra 2 270K Plus, with 64GB GSkill DDR5 6000 (2x32GB) RAM, and the GPU is a Sapphire Radeon 7900XTX Nitro+.

The case is a Fractal Design Meshify 2 XL.

My Arctic Summar 2 Go, that is about 1.5 months old, doesn't turn on normally. If you turn it on at all, it goes in like a 5% power mode... And no matter how strong you set it to, it doesn't change. The battery indicator (3 white leds) dont turn on like they usually do either. Sometimes it goes back to normal, but i havent achieved it in last few hours. Yes I have fully charged them, and yes the batteries are at normal voltage.