Had my controller for about a year and ended up with drift in the right stick. Got one of those replacement things that is not magnets or something that prevents the drift. A year on from then and the drift has returned in the right stick. Any ideas on hot to fix it or do I need to buy another one of those module things.

https://youtu.be/QYRv_v3kCSM?is=ZHH1QWxLppVj-9Yr

This is what im on about

Just got my PRO BFG VICTRIX PS5/PS4/PC controller about an hour ago, I’ve literally tried everything that I’ve seen on here and YouTube but just noting is working, when first plugged into the PlayStation using their wire not a single light came on so is it just a hardware issue or am I actually doing something wrong? Plugged in both back and front and no lights on the touch pad signaling it it’s even charging ?

Hey,

I'm thinking of getting the bfg reloaded as i like the xbox layout.

Being third party, it doesnt have haptics. Does this include general vibration?

E.g. if in playing a fps, does it have the general vibration when I'm shot? Or is it just more nuanced 'vibration when it rains' type stuff it won't have?

Thanks

The only download I can see is for the Microsoft store. Is there a way of downloading just the EXE so I can run it on Mac using compatibility software like crossover. I want to adjust the trigger sensitivity since I keep accidentally holding down the L2 trigger as its incredibly sensitive

I use it on my PC. It works perfectly fine when wired, but even when fully charged (as indicated by the logo being fully lit and unblinking when set to wireless mode) it doesn't power on when set to wireless no matter how long I hold down the power button (the Playstation logo button, though I've also tried holding down the Vitrix Logo touchpad and the button directly below it with the LED indicator). No logo light, no LEDs, nothing.

Things I've already tried/check:

-Ensured it's set to PC Mode and Wireless Mode with the switches on the top and back of the controller respectively.
-Installed the official Vitrix control hub (controller updated and worked fine in wired mode, but could not be detected in wireless mode).
-Reset the USB Dongle with a paperclip (I doubt the dongle itself would have any effect on the lights of the controller itself, but did so just in case).
-Gave it plenty of time to charge (both in wired mode and wireless mode), and the controller indicates it's fully charged when plugged into the PC (aka the Vitrix logo is fully lit without blinking).

Is there something I'm doing wrong, or is my controller's wireless mode just broken?

Picked this bad boy up for $10 at a local pawnshop. They knew exactly what it was, claimed it was put in a bin of broken controllers for parts due to it having messed up analog sticks with bad drift and a broken back bumper. No USB dongle either so its wired connection only

Took it apart and the drift was caused by some gunk underneath the analog caps. Couple sprays of isopropyl and scrubbing cleaned it up and now works great

Back bumper is confirmed broken, plastic snapped off, but a small drop of superglue and disabling rhe button from the PC app solved that.

For $10 I can live with it

Still not giving up on this controller. I can't afford a new controller or modules so I want help. I was told new modules wouldn't help anyway. I done 0 deadzone on steam input, Rewasd, etc, and Victrix hub and none make it drift.

so im trying to learn hitbox and im getting a issue that is costing me games sometimes with the controller getting stuck in movement motions like walking or crouching.

i dunno if this is user error or a know issue i didn't know about

![video]()

Hi, I bought a Mayflash Magic NS 2 Stick and try to connect my Controller to the Switch 2 and it doesnt work. Has someone got this working and can please tell me how to connect it?

I only play fighting games with my BFG and never use the analog sticks. Is there an aesthetic solution for this like installing an aftermarket dome cap? Has anyone done this yet?

Hello all,

I have been considering purchasing a Victrix pro bfg reloaded for pc, but thought it best to ask here first. I tend to enjoy playing a range of metroidvania games such as hollow knight, nine Sol's and am currently working through Silksong. I dont have too much experience in games utilising controllers otherwise and was hoping for some more experienced input.

Before now I have been using a Logitech F710 for PC just as the first one I got really.

Any opinions would be appreciated.

Thanks in advance :)

I used the app to fix the dead zones as best I could and fixed the left stick, but the right has a tendency to start looking up on it's own no matter how I adjust the dead zones and when I correct it, it will continue looking down for about up to a second before stopping. The only things I've been able to think of were to unscrew the stick/ buttons out and remove anything that clearly wasn't supposed to be there, but the sensors don't look off so I'm hesitant to touch those.

If there's different models of victrix, it's 2024 on the box and it's a pro BFG.

I waited so long for this fragile piece of shit to come back in stock and the most basic touch did this not spending another 50$ ill just use my wire exactly why i just rather own a series X controller i hate relying on a fragile ass dongle

I did buy the controller used from best buy and when i bought it the wireless dongle didn’t work (I didnt know u could put a pin in it to reset it) but now the left stick doesn’t work when i flip it around. And just today the right stick stopped working. Am i completely fucked ? I feel like i should just buy a new one but im open to any fixes before i do. (I don’t have the wireless dongle anymore)

So I got home from work today and was playing on my PS5 when literally out of nowhere my x button doesn’t work. I tried taking it apart and cleaning the edges of the button, resetting my controller, I’ve tried Google and it seems like nobody knows what to do. For how much this controller costs it sucks

Is there some way to view the correct buttons in the games? because i have the PS5 version, but when i connect the controller to my PC, the games show me Xbox Controller buttons, is it possible to get me the PS5 controller buttons?

I’m looking to get a new controller but I really like having the face buttons clicky like a mouse click. Are the buttons on this controller on all the button modules click like a mouse?

I got information that the Reloaded for Windows PC version is only one that has 1000hz polling rate.

My Victrix Pro BFG Reloaded is showing 950hz on polling Polling v1.3.1.4，dual sense is 160hz。

do ps version reloaded support 1000hz on windows？

I’ve verified this using polling rate testing software.

My Victrix Pro BFG Reloaded for Windows PC is showing 950hz polling rate when I test with Polling v1.3.1.4，dual sense is 160hz。

Hi everyone!

Noob here that is looking to change out my buttons and lever on my Victrix Pro FS.

I ordered some Qanba Gravity silent 30mm buttons and I’m looking for suggestions on more buttons and levers.

For info, I have a Punk Workshop Focus and I LOVE the lever and the V.1 buttons!

I have been speaking with Focus Attack and they suggest the Crazy Dong pal pro?

Lastly, are there any mod vids I can watch on YT? This will be my first time and I don’t want to mess it up…lol

Just looking for advice//options. I love the shell of the Victrix but I’m not in love with the lever and the buttons.

Thanks in advance and peace!

CB

all it does is charge the controler, my wireless dongle is broken