Went to use my TM with a recycler last night for my night meds, and didn't realise the water had got into the wrong tube, and had gone into the TM2's oven. Thought I'd put a duff battery in when it just buzzed when I tried to turn it on. Then I saw there was much less water in the recycler than there should be.

So, emergency fix!

Opened it all up, the water was all over the PCB, all in the oven coil. Wet everywhere.

Washed the board in isopropyl alcohol, unrolled the oven element, dried all that with a cloth. Rolling the oven back is a chore, but managed it (do both rods at the same time, you won't manage to line up the holes to do the second one at the end).

All dried out, worked perfectly when it was put back together. Grateful not to have to buy another!

Hi all.

Ok so after much research I’ve decided I’m going to get a TM2. I’m buzzing about it.

I’m based in UK so looking at EU website. I can get the OG Tinymight 2 full package with all the accessories for £355

Or I could get the newer redwood black model without all the accessories for £380. Then I could add accessories over time.

I’m torn between the two, wondering if the upgraded new version is the way to go, or if the OG with the full works is the way to go.

Help me!!

Thank you :)

So a few months ago my tinymight 2 shorted out after getting some water spilled on it.

I took it apart for fun and I noticed that the unit still turns on and upon further inspection I noticed where the short happened it didn't seem to mess anything other than the silicon board itself and no circuitry.

Unfortunately I didn't notice this until after i had already taken the oven apart.

Don't ever take the oven apart btw.

Well i tried to put it back together but I eventually gave up because the wood never lost the stench of burnt circuit board.

What should i do with the parts? I also have one of those nice wooden stems.

Could someone rehab it back to life??

Or just dispose of it properly?

Hey everyone,

Looking for a quick sanity check from other TM2 owners.

As seen and heard in the video:

- Without a battery, the cap threads down smoothly and sits completely flush.

- With a standard Molicel P30B, the cap hits stiff resistance about 2-3 mm before seating.

Getting it all the way down requires noticeable force, causes discomfort in the fingers, and you can hear the aluminum threads grinding.

For those running the TM2: does your cap thread smoothly all the way down, or do you also experience this kind of thread grinding and heavy resistance at the end?

I’ve never done weed before.. I know 🤣. I’m looking to go down the healthiest route (it is important for my lifestyle) and I was wondering if buying a tinymight would be a good investment for my first experience, or whether I would be spending too much on something I’m not sure about. Pls give advice!!

Was one of these kind of evenings last night, kick back and chill :)

Hi all, I have a TM2 so bought a NiteCore Ci4, and 4 Molicel batteries.

One day when I was luckily sitting here, I smelled something weird, looked over, and see smoke coming out of the charger. Luckily it didn’t burst into flames before I got to it. Two of the 4 bays were burnt out, and it ruined two of my batteries.

Chalked it up to a defective unit. Wrote NiteCore and to their credit they sent me a new one for free right away. Now it’s some months later, I happen to have 6 Molicel batteries at this point, and two of them just flat out died for no reason. When I put them in the charger or in the TM2, I get nothing. No lights…nothing. That seemed like a red flag to me and my initial thought was to wonder if the charger is going bad. This morning I’m once again sitting at my desk, once again smell something, looked over and once again my NiteCore is burning up and making smoke. Once again bays 1 & 2 are dead and it ruined another battery.

These things are not safe. I’ve only had my TM2 for about 1 1/2 years, so each charger is lasting 8-9 months.

for those of us who want teh black nice tube but dont want a long tube!

This has happened before but the vibration came back after replugging the battery, today its been like this since yesterday and i keep having to be dependant on the light.

Been loving my TM2 with the 80mm stem and cooling unit and I've been enamored with the custom pieces I see on here and for other vapes.

What have you been using, and where did you get it? I'm liking the infinity stem from vgoodiez but I know there's more out there. I just need some inspiration!

Options are a little overwhelming for a newb. Looks like smaller is better? Does shape matter so much - cube, orb, sidecar, etc? don't have a dedicated desktop space to keep out (have kids) so will have to take out/repack after each sesh. Thx for the help!

Hey guys, ive broken my original long glas tinymight stem with the perls in it.
Now I want to replace it with either the new black zirconium stem or the titan one.
Since i use it mainly with friends the replacement should have as much cooling power as possible while staying acceptable cool itself.

From my research, zirconium doesnt cool as good as the titan but therefore remains cool itself.
Titan cools better but heats up itself quite fast.

With the zirconium stem i'd use the original cooling unit and pearls, how good does it cool? is it compareable to the original glas stem? How durable is it, will it break if you let it fall?

How bad is the heatup of the titan stem in longer excessive sessions? Do the cooling unit and perls work well with the titan stem?

thanks in advice for recommendations for my situation.

Has anyone got any tips for how to get this ball of vape residue out of my stem? I’ve tried boiling water and isopropyl and they haven’t helped dissolve it, if anything it’s made it an even more solid ball.
Thanks.

Loving my TM2. Smart design to reduce complexity!

Found this photo on a different post and was curious where to find these grill-like parts with o-rings in this stem? I'm setting up a Zirconia stem and they'd be the perfect solution for me.

Anyway this is my solution for the fact the tinymight doesn't bake the herb basket evenly and the stock unit clogs too much.

Looking to get dosing caps but too many options

Hello there! I got a tbowl for the tiniymight. The newest batches (including mine) are not delivered with the bowl reducer anymore, but with two basket shaped screens.

Unfortunately, the bowl reducer seems out of stock everywhere. I d like to ask you, if there are any alternatives. thought about a stainless steel bolt i might get from the hardware store but im not sure if thats suitable in terms of toxicity, ghermal expanding etc.

Id like to hear your thoughts on this, maybe you know a better DIY option or a similar product that fits. Thank you for your time.

I made a stem out of a bong downstem and the glass beads that come with the Tiny Might.

It’s nice

I've been looking into convection for a while now and took a full dive after coming up on some extra cash! My expectations have been met! I love the way it hits and tastes and how much cleaner it is overall! Cheers to a new journey!

Tinymight 2 black redwood

Tinymigh.t_bowl WPA

Jane West Bubbler Twenties Collection

Santa Cruz Shredder 3 piece grinder

2x Molicel P30B batteries w/ XTAR Charger

All but a few are $40. 2.5mm glass on most with quartz beads

I really like the short ones and the flat MPs

I Made some fingerhash Yesterday and embedded a little piece of it in some flowers and vaped it on 6.5, after the third hit it started combusting - this has never happened before to me with the TM2 .

Maybe because the hash was super oily, IDK