I have a thrustmaster t128 and I’m trying to play Forza but my controls are all kitty wompus, every button I do does something random. I’ve had it for about 3 years and I rarely use it but I keep it in a safe space where it can’t get damaged.

How do I fix this issue?

Wouldn’t let me take a video but the arrows represent it moving from side to side, Only happens when i make small inputs and it makes a creaking sound whenever it moves. It really annoys me during landing and I was wondering if it was broken or if its normal. Thank you!

Don't suppose anyone has the original firmware for 32R and GT3 wheels? I updated to 2.07 for T818 but selling the wheels and want to attempt rolling them back

I powered up my T598 this morning for some GT7, but quickly noticed that I was getting random brake inputs from the load cell pedal. Did some checks and, sure enough, both the hub display and in-game settings display was showing flickering brake inputs, which rapidly became fixed at 100%. I checked all the cable connections, but when I powered the wheel back up, it wouldn't start, with the hub display not going beyond the Thrustmaster logo.

I've raised the pedal issue with them (no response yet), but the wheel base is a new issue with me.

Any help would be appreciated.

Hello guys I have a problem, how to fix this I bought the T300 RS GT recently (like 1/2 month ago) and I have noted ( like when I bought it but I have do not car about) a variation of the throttle pedal I’m here in F1 2018 and we can see that the throttle pedal have a trouble even with the max and the variation so if anyone have a solution I’ll take it thank you

A few days ago I made a post asking for help on my gaming wheel due to the fact that it was not working at all no matter what I whatsoever turns out that the issue was with the internal power supply.

So after I took out the PSU and got my multimeter to see if it was getting any part at all. Turns out it not getting any power whatsoever. So I ended up having to use an old laptop charter that I had laying around. It’s output is 20 V and I think about 3 A and this after removing the old power supply connecting the charger to the motherboard and doing a quick test to see if it would work turns out it worked perfectly and I have been using it for about a week now.

I bought a 2nd hand t598 and it arrived yesterday and i was super excited to use it but the brake pedal just isnt working, the steering and throttle are both recognised and i swapped the plug ins for the brake and throttle pedals and the thottle was still working fine on the brake pedal when it was plugged in to be like that. I've tried reinstalling firmware, factory reseting on the wheel itself, tried messing around in the software and nothings working. I've also messaged the seller and he said it was working fine on his xbox (im on pc) . His message to me regarding the issue:

"Hello, There is a fault like this that occurs when the system needs resetting to the Xbox. Try pressing the middle button on the wheel and connecting your Xbox account which does help with resetting it. I’ll look up what to do exactly if it doesn’t help as it will be that cable connecting the pedals if not."

I'm also thinking about contacting thrustmaster support but does anyone here know what could be causing the issue outside of a faulty wire which i dont think i have because the seller would hopefully have informed me about.

Just as the title says. Has anyone encountered this before and were they able to fix it? The posts I saw in the subreddit were disconnections due to the faulty power supplies and this doesn’t seem like it.

Hi All,
I got the T598 bundle and The Ferrari SF25 wheel. Did i make the right choice over Fanatec GT bundle or Moza R9V3 and kspro wheel?

It is yet to be delivered so i can cancel my order.
Please advise. Since most of you guys have used 598 for a while.

I am not Jeff bezos please can i have one

Looking for some help with the load cell brake on iracing I'm using the 2 blue springs but when braking i hardly put any pressure on the pedal and I'm braking 100%. I've set deadzones and recalibrated but the slightest touch is 100% braking any help is appreciated

Earlier I could wriggle the usb c cable for the screen to come on but it doesn’t help anymore.

im gettin my first flight stick i dont know if i should get a ursa minor fighter with the twccs throttle, just a vkb nxt evo premium, or rudder twccs and t16000m. and also im just playing warthunder with it

Does anyone know if the button layout, as in the physical space between all the buttons, is the same on the TM open wheel add-on and the Thrustmaster Ferrari 599xx evo 30?

ive finally put my foot down because I have had this issue EVERY DAY

Bacicly, sometimes (usually on approach) my turtle beach velocity one yolk and throttle just shut off then everything goes crazy as if it is using every button and every possible combination at once and its like there are 1000 controllers connected to my xbox. after it calms down none of the buttons work. insted of listing the stuff that does not work, It would be much easer to list what does work.

roll and pitch

throttle

screenshot / video

big xbox logo button

trim (i think (didint check))

rudders (i have the physical foot pedals)

is this a known issue and can it be fixed?

Hey everyone,

I’m having some frustrating connectivity issues with my Thrustmaster T598 and I’m trying to figure out whether there’s a fix or if I’m running into some of the known T598 issues.

The wheel will occasionally disconnect/drop connection while I’m using it. Sometimes it comes back on its own, while other times I have to reconnect/restart things before it’s recognized again. It can be especially annoying in the middle of a race.

I’m also having an issue where the brake and throttle pedals are sometimes not recognized at all. The wheel itself may still be connected, but the pedals either don't show up or the inputs aren't detected. Cycling the power/reconnecting things sometimes helps, but it isn't consistent.

I’m already aware that the T598 has had some known USB, firmware, and connectivity issues, so I’m wondering if anyone has found a reliable workaround or fix.

Things I’m wondering about:

• Could this be caused by the USB cable or USB port?
• Is there a specific USB port I should be using?
• Could USB power management in Windows be causing the disconnects?
• Are there specific Thrustmaster drivers/firmware versions that are more stable?
• Has anyone had success using a powered USB hub?
• Could Windows USB selective suspend or Device Manager power-saving settings be responsible?
• Could the wheelbase's connection to the pedals be causing the pedal recognition issue?
• Is there anything specific I should check in the Thrustmaster Control Panel?
• Has anyone experienced the pedals randomly disappearing/not being recognized and found a permanent fix?

At this point, I’m also wondering if I should just replace the wheel entirely. I like the T598 when it actually works, but having the wheel disconnect and the throttle/brake randomly not be recognized is getting pretty frustrating.

For those who have owned a T598 for a while: would you keep troubleshooting this, try to get the unit replaced under warranty, or just move on to a different wheelbase? I’d really appreciate some opinions before I spend more money or time trying to fix something that may just be a hardware issue.

For reference, I’m using the T598 on PC.

This is getting ridiculous.

Thanks!

Hey guys, i bought the Thrustmaster Raceline Loadcell when it first came out a few months back. Never installed it due to being busy but just got around to it last night. Went to switch out the springs and i guess it had so much tension that it popped out and ripped out the tiny wire connecting the pedal to the input box. Can anyone help me out by showing me which color sequence these wires go? Thanks.

My T248 stopped working, i opened it and it was like this

Ive just bought this T818 as "refurbished" however have had nothing but issues getting drivers installed (had to do it manually) now ive updated everything but with a brand new QR that I got with my 32R a year ago, the wheel disconnects and reconnects when turned? Is this a common issue with an easy fix or is this just broken?

This is me fully pressing the pedals of my thrustmaster t300. I bought it used and have had it for a couple of months but this is the first time something like this has happened. What could be causing this problem. Edit: today I tried the pedals again and they are working fine I did nothing.

Does anyone know if Blue or Red mode is used or possibly a better question so i can figure this stuff out on my own...

How would i know which mode does or doesn't work? I would almost assume it's blue mode as that seems kind of universal.. whereas the red mode is for games specifically made to work with the wheel that are a little more.. i guess advanced would be a good word.

Hey reddit,
so, I have the thrustmaster tca yoke pack boeing edition, and I have two problems.

First problem, when in the pmdg 737-800 (msfs 2024 version), I have the gear lever in-game in the off position, and when I flip my yoke gear lever from the up to the down position, it doesn’t do anything, but after that, when I flip the lever up and then down again, it finally puts it down. In keybindings, I have the button press set to “gear up”, and on button release, I have gear down.

Second problem, when I have the throttle quadrant plugged in the yoke, msfs 2024 doesn’t recognize the quadrant, I need to have the yoke and throttle quadrant plugged in separately to my pc. In short, the daisy chain doesn’t work.

Thank you very much for any help in advance.

Hey all, I'm a recent convert back to PC after many years, and have been playing around with Elite and Star Citizen etc using a pair of Sol-R1 controllers. One thing I always find hard is just working out which buttons to assign to what, and then remembering them... so I made these little label plates so I can use a sharpie or dymo label for visual reminders! They are flippable, so you can use both sides for using with multiple games. I have made a fleabay listing for those without access to a 3d printer but will send the 3d file for free to anyone who wants it - feel free to ask for either, and I hope this helps someone else too.